Leicestershire · England
Bath Re-enamelling in Field Head
Full bath re-enamelling and resurfacing for homes and businesses in Field Head and across Leicestershire. Free, fixed quotes from your pictures.
- Resurfacing from £350
- Several chips and rust patches
- A bath that stays dull however much you clean it
About our bath re-enamelling in Field Head
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. We work on pressed steel baths, cast iron baths and Victorian roll-tops, and common reasons people contact us are a coloured bath you want in white and worn patches where water runs and sits.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Where
- Field Head (LE67)
- Region
- Leicestershire
- Cover
- One year on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
When a repair is not the answer
A few problems are outside what a surface repair can do:
- Acrylic that moves when you stand in it
- A cast iron or steel bath that is cracked right through
- A bath that is rusted through
Not sure? Send photos and we will give you a straight answer before you book.
Surfaces we repair
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
Work for landlords and builders
Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Keeping it looking good
Nothing complicated is needed:
- Have chips seen to early
- Never use suction bath mats
- Leave the bath for the full curing time before using it
- Keep toiletries on a shelf rather than in the bath
The first few days matter most: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.
How the visit works
On the day itself, there’s little for you to do. Show us the job, point us to the room, and we will take it from there. Most visits take a full day, tidy-up included.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s generally ready the next day.
Preparing for the visit
- Mention any earlier repairs or resurfacing
- Point us to the nearest place to park
- Tell us about parking, stairs or access
Ask for a price
There’s no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Read more
Field Head and nearby
Field Head is about 5 miles south-east of Coalville, in Leicestershire. From the centre of Field Head to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Field Head is one of 287 places in Leicestershire where we work. We work right across the region, from Field Head to Birmingham (30 miles away).
Here we cover the LE67 postcode area. You’ll find streets such as Ratby Lane, Launde Road and Jacqueline Road, all of which we cover. Neighbouring places we cover include Markfield (1 mile north-west), Newtown Linford (2 miles east), Groby (2 miles south-east), Ratby (2 miles south-east) and Botcheston (3 miles south). Further out, we also cover Loughborough (7 miles north), Hinckley (11 miles south-west), Wigston (10 miles south-east), Coalville (5 miles north-west), Ashby-de-la-Zouch (10 miles north-west) and Shepshed (6 miles north).
Near you in Field Head
Typical jobs here are in homes near Mercenfeld Primary School, South Charnwood High School and Church of St Michael and the streets around them. Nearby too are Coach & Horses pub (under half a mile north) and Altar Stones Nature Reserve (1 mile north-west). Further afield, we also cover the area around Glenfield Hospital (4.2 miles south-east) and Kirby Muxloe Castle (3.5 miles south-east). The countryside around Field Head includes Sheet Hedges Wood and Old John.
What affects the price in Field Head
Prices start from £350. There’s no charge for travel to Field Head. The price depends on:
- Access to the area
- The colour and finish to match
- Whether we combine several jobs
- Whether old repairs or coatings need taking off
No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Send pictures for a quote
Good photos mean an accurate price. Here’s what we find most useful:
- Your postcode, so we can check dates
- Natural light rather than flash
- One picture of the entire bath
- Something in shot to show the size
If you’re in Field Head and want a price, the easiest route is pictures: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
Also near Field Head
Also in Field Head
Should you replace it?
A replacement frequently means several trades over several days. Resurfacing takes one technician and typically a day, and the bath is usable the day after. Our bath re-enamelling starts from £350. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Why book with us
- One price list for the entire UK
- Straight answers about what a repair can do
- A fixed quote before you book
- Dust sheets down, tidy finish
Read our pricing or guide to resurfacing and replacement costs.
Different materials, different repairs
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.
Your questions about bath re-enamelling in Field Head
Which areas do you work in?
We work UK-wide, and that includes Field Head. Our prices are the same everywhere.
Someone resurfaced my bath and it’s peeling. Can you help?
Generally, yes. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
How long is the bath unusable?
One day for most baths and can be used the day after. We give you timings with the quote.
What happens once I’ve sent photos?
You get a fixed quote and available dates. If anything’s unclear, we will ask for another photo.
Do you charge for travel?
No. Our quotes include travel, and we charge the same wherever you are.
Can tenants book a repair?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
Is it safe with children and pets around?
Yes, as long as they stay out of the room we’re working in. We’ll tell you when the room can be used again.
Do I have to be there?
Someone needs to let us in and show us the job. You do not need to watch us work.
About our accreditations · Every repair comes with a one-year guarantee.
