North Lincolnshire · England
Bath Re-enamelling in Fockerby
Fixed-price bath re-enamelling in Fockerby and the surrounding area, done in a single visit in most cases.
- Resurfacing from £350
- Staining under the taps and around the waste
- Wear marks under the taps
About our bath re-enamelling in Fockerby
We don’t move the bath, so the taps, tiles and plumbing are not touched. Most baths are done in one visit, with the bath ready to use the following day. We work on cast iron baths, acrylic baths and Victorian roll-tops, and people most frequently call us about staining under the taps and around the waste and several chips and rust patches.
Your repair is guaranteed for a year, as with every job we do.
- Location
- Fockerby (DN17)
- Area hub
- North Lincolnshire
- Cover
- A year, on every repair
- Price
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Landlord and trade work in Fockerby
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.
Landlords, letting agents and housing providers in Fockerby use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Your questions about bath re-enamelling in Fockerby
Will the bath be moved?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
Are there extra charges for Fockerby?
No. Our quotes include travel, with the same prices everywhere we work.
How do I book?
Photos of the damage, a photo of the whole bath and your postcode. After that, we just agree a date.
Can you resurface a pink bath in white?
Yes, white is the usual choice. Mention the colour you want when you send pictures.
Do you come to Fockerby?
We do. Technicians travel to Fockerby from across the region, and the price is the same as everywhere else.
Are you accredited?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Does someone need to be in?
We need someone to let us in. You don’t need to watch us work.
It’s been repaired before. Can you still fix it?
Most of the time. Let us know what was used before.
Our work in Fockerby
Fockerby is about 7 miles north of Scunthorpe, in North Lincolnshire. Book a date that suits you, and you will know when to expect us, so there’s no waiting around. We work in all 90 towns and villages across North Lincolnshire, from the larger towns to small villages. Our nearest city page is Leeds, about 35 miles away.
We work across DN17 and the streets around it. Whether you live on High Street, Station Road and Cross Street or anywhere nearby, a technician can come to you. We also cover the places around Fockerby: Garthorpe (1 mile south), Adlingfleet (1 mile north), Luddington (2 miles south-west), Ousefleet (3 miles north-west) and Amcotts (3 miles south). Larger places within reach include Scunthorpe (7 miles south), Barton-upon-Humber (11 miles east), Bottesford (8 miles south), Brigg (12 miles south-east), Frodingham (5 miles south-east) and Crosby (5 miles south-east).
Local landmarks in Fockerby
Typical jobs here are in homes near Bay Horse pub and St Mary The Virgin, among other places. Other landmarks nearby include Scunthorpe General Hospital (5.6 miles south). The countryside around Fockerby includes Blacktoft Sands RSPB reserve.
Towns and villages near Fockerby
What else we do in Fockerby
What bath re-enamelling costs
Prices start from £350. We give every job a fixed price from photos. This is what makes a difference:
- The size and number of damaged areas
- Whether it’s a chip, crack, burn or wear
- Whether old repairs or coatings need taking off
- How easy the damage is to reach
Instead of hourly rates, we price the entire job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
Getting a price from pictures
Photographing the damage takes a minute. Try to send:
- Details of any past repairs
- Your postcode, so we can check dates
- A wider photo showing the whole bath
- Any details about the material
For a price in Fockerby, the easiest route is pictures: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
DIY kit or professional repair?
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
Repair or replace: which is better?
Replacing a bath can take several days across several trades. Resurfacing takes one technician and generally a day, with the bath back in use the next day. Our bath re-enamelling starts from £350. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send photos and we will give you the exact figure.
Why us?
- Dust sheets down, tidy finish
- Straight answers about what a repair can do
- One-year guarantee on every repair
- One price list for the entire UK
See our pricing and bath cost comparison.
Keeping it looking good
It’s all simple stuff:
- Never use suction bath mats
- Do not let dyes or oils sit on the finish
- Stick to gentle, non-abrasive cleaners
- Store bottles off the bath
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
What happens on the day
We work cleanly and quietly, so you can carry on at home. Protection goes down first, then the work takes the best part of a day. At the end we talk you through how soon it can be used and how to care for it.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the day after.
Getting ready for the visit
- Point us to the nearest place to park
- Mention any earlier repairs or resurfacing
- Move bottles, mats and clutter away from the area
How to get a price
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can price the job.
Advice
What your bath is made of matters
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.
What a repair can’t fix
Before you book, it’s worth knowing the limits:
- Holes rusted through the metal
- Anything hidden under an old coating, until we remove it
- A bath split right through the body
If in doubt, send pictures and we will say what we think.
Materials we work on in Fockerby
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
About our accreditations · Every repair comes with a one-year guarantee.
