Coventry · England

Bath Re-enamelling for Earlsdon homes

Damaged bath in Earlsdon? We repair it in place, match it on site and back it with a one-year guarantee.

  • Resurfacing from £350
  • Lots of chips and rust spots
  • Wear marks under the taps
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath re-enamelling in Earlsdon

Keeping it looking good

After the repair has cured, a few habits help it last:

  • Never use suction bath mats
  • Repair dripping taps early
  • Keep toiletries on a shelf rather than in the bath
  • Wash away dyes and oils after use

Treat the new finish gently at first: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.

The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.

Bath re-enamelling at your home in Earlsdon

We don’t move the bath, so the taps, tiles and plumbing are not touched. Most baths are done in one visit, with the bath ready to use the following day. We work on pressed steel baths, Victorian roll-tops and cast iron baths, and the jobs we see most are thin, worn enamel in places and a dull, rough surface that won’t come clean.

A one-year guarantee comes as standard.

Basin with yellowed glaze resurfaced to a clean white finish
Where
Earlsdon (CV5, CV1, CV3)
Area hub
Coventry
Cover
12 months on all our work
Quote
From £350. Free, fixed price from pictures
Call
0345 017 0787
Updated
23 October 2026

Should I try a DIY kit first?

It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.

A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.

Your questions about bath re-enamelling in Earlsdon

How long does re-enamelling last?

A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.

Do you work for landlords and businesses?

We do, regularly. We can quote for several properties together and work between tenancies.

Do you cover Earlsdon?

We do. We send a technician to Earlsdon for every job, with no extra charge for travel.

Does someone need to be in?

Someone needs to let us in and show us the job. After that, you can carry on with your day.

Can you quote from photos?

Generally, yes. Clear pictures let us give you a fixed price without visiting.

What if the damage is worse than the photos show?

The price is fixed for what the photos show. If there is more, we’ll tell you before starting.

How quickly can you book me in?

We’ll give you dates with your quote. Tell us if you need it done quickly.

Will you leave a mess?

Dust sheets and masking go down before we start, and tidy up before we leave.

Landlords, agents and businesses in Earlsdon

We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which is easier on the people living there.

If you manage property in Earlsdon, we can repair and quote for several addresses together. Send pictures for each one and we’ll price them together.

Repair or replace in Earlsdon?

A replacement frequently means several trades over several days. Resurfacing takes one technician and typically a day. Prices start from £350. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.

Why Earlsdon clients choose us

  • Nothing taken out or refitted
  • One price list for the entire UK
  • One visit for most repairs
  • A year’s guarantee on all work

Take a look at our pricing and guide to resurfacing and replacement costs.

Signs you need bath re-enamelling in Earlsdon

Enamel wears gradually. Abrasive cleaners, limescale and years of use dull the surface, typically first under the taps and around the waste.

You may need us if you’ve spotted:

  • Enamel that is lost its shine and feels rough
  • Chips and rust in more than one place
  • A period or roll-top bath worth keeping
  • Thin, worn enamel in places

What your quote should include

  • A fixed price, and whether VAT is included
  • How the colour is matched
  • What happens if the damage is worse than the photos show
  • Whether cleaning and preparation are in the price

10 questions to ask before you book

The process

You do not need to empty the room. Everything we use comes in the van with us, put protection down and get going once we’ve agreed what we are doing. It normally takes most of the day, and you are welcome to carry on with your day while we work.

  1. We mask and protect the room and ventilate it.
  2. We clean and degrease the bath and repair any chips or rust.
  3. We key the surface and put on a bonding primer.
  4. We spray on the new enamel finish in several coats.
  5. Once cured, normally by the day after, the bath is ready.

Getting ready for the visit

  • Mention any earlier repairs or resurfacing
  • Plan for the room to be out of bounds to pets and children
  • Tell us about parking, stairs or access

How to get a price

To get a price, send a couple of pictures through our quote form or call us. We will say right away if a repair is the right fix.

Get a fixed quote

Advice

What bath re-enamelling costs

Prices start from £350. We give every job a fixed quote from photos. This is what makes a difference:

  • Previous DIY repairs that have to come out
  • The material
  • Whether we combine several jobs
  • How much damage there is

A repair is priced on what needs doing, not your postcode. You will see the full price before booking, with no extras added later.

Send photos for a quote

Good photos mean an accurate price. Here’s what we find most useful:

  • Where you are, by postcode
  • One sharp close-up of the damage
  • Natural light rather than flash
  • Any earlier repairs or coatings

For a price in Earlsdon, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.

Covering Earlsdon

Earlsdon is about 1 mile south-west of Coventry, in Coventry. Across the CV5 area, we carry out the work at your property. Earlsdon is one of 88 places in Coventry where we work. Our nearest city page is Birmingham, about 16 miles away.

Our technicians cover all of the CV5, CV1 and CV3 postcode area. You will find streets such as Bates Road, Innis Road and Aston Road, and we cover them all. If you are just outside Earlsdon, we cover Chapelfields (1 mile north-west), Spon End (1 mile east), Whoberley (1 mile north-west), Fletchamstead (1 mile west) and Radford (1 mile north-east). We also work in nearby towns such as Ernesford Grange (3 miles east), Foleshill (4 miles north-east), Wood End (4 miles north-east), Bell Green (3 miles north-east), Binley (3 miles east) and Alderman's Green (3 miles north-east).

What’s near Earlsdon

Typical jobs here are in homes near Barr's Hill School and Community College, St. Mary Magdalen and Hearsall Common, among other places. Also close by are King Henry VIII Preparatory School (under half a mile south-east), Ruined Cathedral Church of St Michael (1.1 miles north-east), The City Arms (under half a mile south-west) and Earlsdon Primary School (less than half a mile north). The nearest railway station is Coventry station, about 0.7 miles east. Well-known places in the area include Coventry Watch Museum (0.8 miles north-east) and Arena Park Shopping Centre (3.4 miles north-east). Green spaces nearby include Brandon Marsh and Oxpen Meadow Lake.

Map of Earlsdon © OpenStreetMap contributors

Different materials, different repairs

Pressed steel

Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.

Acrylic

Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.