Herefordshire · England
Bath re-enamelling & resurfacing in Ford, Herefordshire
Damaged bath in Ford? We put it right where it is, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- Lots of chips and rust spots
- A peeling or bubbling previous coating
Bath re-enamelling in Ford without replacing anything
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. If you’re dealing with a coloured bath you want in white and lots of chips and rust spots, we can help.
All our work comes with our one-year guarantee, wherever you are in Herefordshire.
- Location
- Ford (HR6)
- Region
- Herefordshire
- Cover
- One year on every repair
- Price
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Your questions about bath re-enamelling in Ford
Do you charge for travel?
There’s no separate call-out charge. Your fixed quote includes everything.
Do you work in Ford?
Yes. We work across the UK and come to Ford and the rest of Herefordshire. Send us photos for a fixed quote, or call 0345 017 0787.
Can I get a quote without a visit?
In nearly every case. If photos don’t show enough, we will ask for another angle.
How long is the bath unusable?
Most baths are done in a day and can be used the day after. We give you timings with the quote.
Is it messy?
Dust sheets and masking go down before we start, and tidy up before we leave.
Can landlords book you?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses in Ford.
Is it worth repairing rather than replacing?
Normally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
For landlords and businesses
Letting agents frequently send us pictures straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We’re CHAS, Constructionline and SafeContractor accredited.
Repair or replace: which is better?
When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Nothing else is disturbed. Resurfacing from £350, with every job priced individually. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Why us?
- CHAS, Constructionline and SafeContractor accredited
- Nothing taken out or refitted
- Same prices wherever you are
- We come to you, anywhere in the UK
Take a look at our full price list and guide to resurfacing and replacement costs.
Can I fix it myself?
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Covering Ford
Ford is about 9 miles north of Hereford, in Herefordshire. Across the HR6 area, we carry out the work at your property. Ford is one of 255 towns and villages in Herefordshire we cover. Our jobs stretch from Ford to Birmingham (about 40 miles away).
Jobs in HR6 are booked in the same way as anywhere else. Close by, we cover Marlbrook (1 mile south), Wharton (1 mile north), Newton (1 mile south), Hope under Dinmore (1 mile south) and Wellington (4 miles south). Further out, we also cover Hereford (9 miles south), Leominster (3 miles north), Redhill (10 miles south), Newton Farm (10 miles south), Whitecross (9 miles south) and Eign Hill (10 miles south).
What’s near Ford
We visit homes around Church of St John of Jerusalem and Earl Mortimer College. The closest station to Ford is Leominster station, roughly 2.4 miles north of the centre. Other landmarks nearby include Hampton Castle (1.8 miles south) and Leominster (2.2 miles north-west). Not far away are Dinmore Hill.
Nearby places to Ford
What else we do in Ford
Prices and what affects them
Prices start from £350. We do not charge extra for travel to Ford. The price depends on:
- Unusual colours or finishes
- The material and finish
- Doing more than one item at once
- Whether it’s a chip, crack, burn or wear
The price reflects the work involved, not where you live. The full price is agreed before you book, with nothing added on the day.
Quotes from your pictures
Photographing the damage takes a minute, and it saves a visit. Please include:
- One sharp close-up of the damage
- A wider photo showing the entire bath
- Natural light rather than flash
- The postcode, so we can plan the visit
We price from pictures so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
Common problems we fix in Ford
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
Get in touch if you’ve noticed:
- A coloured bath you want in white
- A coating lifting around the plughole
- A roll-top that is seen better days
- Lots of chips and rust spots
What to look for in a quote
- How changes to the job are handled
- What the guarantee covers, and for how long
- How soon you can use it again
- How the colour is matched
What we do, step by step
There’s not much you need to do on the day. Show us the job, point us to the room, and we will get on with it. The job generally runs to a full day, including clearing up.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can typically be used the day after.
Getting ready for the visit
- Make sure the room can be ventilated
- Let us know about parking or access
- Avoid using the area for a few hours before we arrive
Get a quote
Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and we’ll reply with a fixed quote. Quotes are free and no obligation.
Read more
What your bath is made of matters
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel often rusts by the plughole, so we pay close attention there.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Aftercare tips
To keep it looking its best:
- Do not use the bath until it has fully cured
- A quick wipe after use keeps limescale away
- Repair dripping taps early
- Have chips seen to early
Rinse the bath and wipe it over after use, especially in hard water areas, to stop limescale building up.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
About our accreditations · Every repair comes with a one-year guarantee.
