Herefordshire · England
Bath re-enamelling & resurfacing in Marlbrook, Herefordshire
Fixed-price bath re-enamelling in Marlbrook and the surrounding area, normally in one visit.
- Resurfacing from £350
- A dull, rough surface that will not come clean
- Brown or grey marks that don’t clean off
Bath re-enamelling in Marlbrook, done in place
We don’t move the bath, so your taps, tiles and plumbing are left alone. It typically takes one visit, with the bath ready to use the following day. Typical jobs include enamel that’s lost its shine and feels rough and stains that won’t shift, in acrylic baths, cast iron baths and pressed steel baths.
Your repair is guaranteed for a year, as with every job we do.
- Area
- Marlbrook (HR6)
- Area hub
- Herefordshire
- Cover
- A year, on every repair
- Price
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Work for landlords and builders
Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
Marlbrook questions
Does the bath have to be removed?
Not at all. Everything is done in your bathroom, with the room masked and ventilated.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
What happens if you find more damage?
We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.
How quickly can you book me in?
We will give you dates with your quote. Tell us if you need it done quickly.
Can you do the outside of a roll-top?
Yes. We can do the inside and outside.
Is it safe with children and pets around?
Please keep children and pets out of the room during the visit. Everywhere else in the home is fine.
What areas do you cover?
Everywhere in the UK, Marlbrook included. Travel is included in the price.
Is there a call-out fee?
No. Our quotes include travel, and we charge the same wherever you are.
About Marlbrook
Marlbrook is about 9 miles north of Hereford, in Herefordshire. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Marlbrook is one of 255 towns and villages in Herefordshire we cover. We work right across the region, from Marlbrook to Birmingham (40 miles away).
We work across HR6 and the streets around it. Other places close to Marlbrook include Ford (1 mile north), Wharton (1 mile north), Newton (1 mile south), Hope under Dinmore (1 mile south) and Wellington (4 miles south). Larger places within reach include Hereford (9 miles south), Leominster (3 miles north), Redhill (10 miles south), Newton Farm (10 miles south), Whitecross (9 miles south) and Eign Hill (9 miles south).
Landmarks near Marlbrook
Our clients here include homes close to Earl Mortimer College and Church of St John of Jerusalem, among other places. For rail, the closest station is Leominster station, roughly 2.7 miles north. Well-known places in the area include Leominster (2.4 miles north-west) and Hampton Castle (1.5 miles south-east). The countryside around Marlbrook includes Dinmore Hill.
What bath re-enamelling costs
Prices start from £350. Each job gets its own fixed price. This is what makes a difference:
- How much damage there is
- The material
- Doing more than one item at once
- The colour and finish to match
A repair is priced on what needs doing, not your postcode. The full price is agreed before booking.
Send pictures for a quote
It only takes a minute to photograph the damage, and it saves a visit. Please include:
- A coin or ruler next to the damage for scale
- One picture of the whole bath
- Your postcode, so we can check dates
- Any details about the material
Pricing is simple: take a close-up of the damage and a photo from further back, send them over with your postcode, and you will get a fixed quote back. There’s no charge for the quote and no obligation.
What we do, step by step
On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. The job usually takes the best part of a day. We tidy up before we leave and let you know when you can use it again.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Tell us about parking, stairs or access
- Tell us about any previous repairs or coatings
- Avoid using the area for a few hours before we arrive
Getting a price
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Related advice
Also near Marlbrook
More services for Marlbrook
Looking after it afterwards
To keep it looking its best for years:
- Wash away dyes and oils after use
- Don’t leave bottles, razors or sponges standing on the surface
- A quick wipe after use keeps limescale away
- Don’t leave a chip unrepaired
Stick to mild, non-abrasive cleaners, don’t use suction bath mats, and keep bottles and razors off the surface.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Different materials, different repairs
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Can I fix it myself?
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
What we are called out for in Marlbrook
Enamel’s shine is only skin deep, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
Send us a photo if you notice any of these:
- Worn patches where water runs and sits
- A coloured bath you want in white
- An original cast iron bath that needs restoring
- A coating lifting around the plughole
Comparing quotes
- Whether they match the colour on site
- Whether a trained technician does the job
- Aftercare advice
- What prep work is covered
What we can’t put right
Some jobs are not right for a repair, for example:
- Acrylic that moves when you stand in it
- A bath that is rusted through
- A metal bath with a through crack
If in doubt, send pictures and we will say what we think.
Surfaces we repair
- Pressed steel baths
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
About our accreditations · Every repair comes with a one-year guarantee.
