Sefton · England
Bath re-enamelling & resurfacing in Hightown, Sefton
Our technicians come to Hightown for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- A coloured bath you want in white
- A peeling or bubbling previous coating
Signs you need bath re-enamelling in Hightown
Frequently the bath has just had decades of use, with nothing wrong except the surface. Underneath, a cast iron or steel bath is generally as strong as ever.
The things clients usually mention when they call include:
- A coloured bath you want in white
- An original cast iron bath that needs restoring
- Chips and rust in more than one place
- An old resurfacing that’s failing
What your quote should include
- What prep work is covered
- If travel is included in the price
- How your room will be protected
- Who will actually do the work
How we handle bath re-enamelling in Hightown
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. Typical jobs include staining under the taps and around the waste and a bath that stays dull however much you clean it, in acrylic baths, pressed steel baths and Victorian roll-tops.
Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before you book.
- Area
- Hightown (L38)
- County
- Sefton
- Warranty
- A year, on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Hightown and nearby
Hightown is about 2 miles south of Formby, in Sefton. Book a date that suits you, and we’ll give you an arrival time in advance, so there’s no waiting around. We work in 36 places across Sefton, from the larger towns to small villages. We work right across the region, from Hightown to Liverpool (10 miles away).
Postcode districts we cover here: L38. Whether you live on Rathbone Road, Tudor Gardens and School Road or anywhere nearby, we can come to you. We also cover the places around Hightown: Lady Green (1 mile east), Ince Blundell (1 mile east), Little Altcar (2 miles north), Little Crosby (2 miles south-east) and Carr Houses (2 miles east). Within a short drive, we also cover Southport (8 miles north), Bootle (5 miles south-east), Maghull (5 miles east), Litherland (4 miles south-east), Seaforth (4 miles south-east) and Ford (4 miles south-east).
Landmarks near Hightown
Around Hightown, we work in homes near Range High School and St Stephen and the streets around them. There is a railway station in Hightown itself: Hightown station. A little further out are The Village Museum (1.8 miles south-east). Green spaces nearby include Crosby Marina and Cabin Hill National Nature Reserve.
Hightown: your questions answered
Can you fix a peeling bath coating?
In most cases. The old coating comes off before we resurface it. Mention it when you send photos.
Is there a smell?
Yes, while we are applying the finish. Ventilation keeps it down, and it fades as the finish cures.
Can you resurface a pink bath in white?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
How much does bath re-enamelling cost in Hightown?
Prices start from £350. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
Is it messy?
Dust sheets and masking go down before we start, and tidy up before we leave.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
How do I book?
Some photos, your postcode and how to reach you. On the day, we only need access to the room.
Is the work guaranteed?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
What bath re-enamelling costs
Resurfacing from £350. We do not charge extra for travel to Hightown. The price comes down to:
- The material and finish
- Where the damage is and how we get to it
- Whether it’s a chip, crack, burn or wear
- How hard the colour is to match
A repair generally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
How to get a fixed quote
A couple of clear pictures is all it takes. Try to include:
- A wider photo showing the entire bath
- A close-up of the damage, in focus
- Whether it’s been repaired or coated before
- Natural light rather than flash
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed price without visiting.
When we would advise against a repair
We’ll always be straight with you, so here’s what a repair can’t fix:
- An acrylic bath that flexes badly underfoot
- Plumbing leaks, which need a plumber
- Steel that has corroded right through
Send us pictures and we will tell you honestly before you book.
Materials we repair
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
How the visit works
Arrival times are agreed in advance. On site, it takes a full day. The room is left tidy and ready to use once it has cured.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Move bottles, mats and clutter away from the area
- Keep a parking space free if you can
- Keep pets and children out of the room while we work
Getting a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. What comes back is a fixed quote, not a guess.
Read more
Places near Hightown
What else we do in Hightown
For landlords and businesses
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
We are used to working with agents and managing companies. Send the address, pictures and access details and we will arrange it.
Repair or replace: which is better?
Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing usually wins. Prices start from £350. The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed price from your pictures, so there are no surprises on the day.
Why us?
- No extra charge for your area
- Every repair guaranteed for a year
- Nothing taken out or refitted
- Colours mixed by hand to suit your surface
See our full price list and bath cost comparison.
What your bath is made of matters
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.
How to care for the repair
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Repair dripping taps early
- Don’t let dyes or oils sit on the finish
- Keep suction mats out of the bath
- Get any chip repaired quickly
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
About our accreditations · Every repair comes with a one-year guarantee.
