Somerset · England
Bath Re-enamelling in Four Forks
Damaged bath in Four Forks? We repair it in place, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- A coloured bath you want in white
- An old resurfacing that is failing
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
Bath re-enamelling in Four Forks without replacing anything
If your bath is sound but looks tired, re-enamelling is usually the most cost-effective option. There is no removal, plumbing or tiling involved. Our repair technicians work on acrylic baths, Victorian roll-tops and cast iron baths, and common reasons people get in touch are an outdated colour you’d like to change and a coating lifting around the plughole.
Every repair is covered by our one-year guarantee, wherever you are in Somerset.
- Area
- Four Forks (TA5)
- Region
- Somerset
- Cover
- A year, on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Landlords, agents and businesses in Four Forks
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which is easier on the people living there.
Four Forks and the surrounding area
Four Forks is about 4 miles west of Bridgwater, in Somerset. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. We work in all 640 towns and villages in Somerset.
Here we cover the TA5 postcode area. Whether you live on High Street, Four Forks Lane and Barford Close or anywhere nearby, we can come to you. Close by, we cover Enmore (1 mile south-east), Gothelney Green (1 mile east), Bradley Green (2 miles north-east), Edbrook (2 miles north) and Cannington (2 miles north-east). Further out, we also cover Taunton (8 miles south), Bridgwater (4 miles east), Burnham-on-Sea (9 miles north-east), Wellington (12 miles south-west), Street (15 miles east) and Sydenham (5 miles east).
Local landmarks in Four Forks
Typical jobs here are in homes near Lamb Inn, Brymore Academy and Church of St Margaret. Four Forks’s nearest station is Bridgwater station, roughly 4.7 miles east. Nearby you’ll also find Bridgwater Community Hospital (5.5 miles east) and Cannington Camp (2.3 miles north). The countryside around Four Forks includes Cothelstone Hill.
Materials and what they mean for the repair
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
Four Forks: your questions answered
Do I have to be there?
We need someone to let us in. After that, you can carry on with your day.
Is it OK to have pets in the house?
We ask you to keep children and pets out of the room while we work and until it has cured. The rest of the house is unaffected.
Can you do the outside of a roll-top?
Yes. Inside and out.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
Are there extra charges for Four Forks?
No. Our quotes include travel, with the same prices everywhere we work.
Is it worth repairing rather than replacing?
Generally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
Will there be fumes?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
What we do, step by step
There is not much you need to do on the day. Let us in and show us the room, and we will take it from there. Most visits take a full day, including clearing up.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
Preparing for the visit
- Clear toiletries, mats and anything else from around the area
- Mention if the room is upstairs or in a flat
- Have a window or extractor fan available
Ask for a price
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed quote without visiting.
Advice
What we are called out for in Four Forks
Previous coatings can fail too, peeling around the waste or bubbling. We strip what’s failing and start again.
The things customers generally mention when they call include:
- Staining under the taps and around the waste
- Worn patches where water runs and sits
- A bath in a colour that no longer suits
- A roll-top that is seen better days
Comparing quotes
- What prep work is covered
- Is the price fixed, and does it include VAT?
- Who will actually do the work
- How the colour is matched
Prices and what affects them
Prices start from £350. We charge the same across the UK, including Four Forks. What changes the price is:
- Access to the area
- Doing more than one item at once
- The size and number of damaged areas
- The material
Every job is a little different, so we price each one individually. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Getting a price from photos
You can take the photos on your phone, there’s no need for anything special. Just ensure we can see:
- A picture taken from further back
- Daylight if possible, and no flash reflection
- Any details about the material
- Any earlier repairs or coatings
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them over. You’ll get a fixed price, not an estimate.
Towns and villages near Four Forks
Also in Four Forks
Repair or replace in Four Forks?
Replacing a cast iron bath is a big job: they’re heavy, often need breaking up, and a new one isn’t cheap. Resurfacing in place avoids that entirely. Our bath re-enamelling starts from £350. We do not add extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
What you get with us
- Free fixed quotes from pictures
- Dust sheets down, tidy finish
- Colours mixed by hand to suit your surface
- Technicians who travel to you, UK-wide
See our pricing and guide to resurfacing and replacement costs.
When a repair is not the answer
In fairness, some problems need a different fix:
- Acrylic that moves when you stand in it
- A bath that is rusted through
- A metal bath with a through crack
If in doubt, send pictures and we’ll say what we think before booking.
Surfaces we repair
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
About our accreditations · Every repair comes with a one-year guarantee.
