Cheshire West and Chester · England

Bath re-enamelling & resurfacing in Four Lane Ends, Cheshire West and Chester

Fixed-price bath re-enamelling in Four Lane Ends and the surrounding area, done in a single visit in most cases.

  • Resurfacing from £350
  • A peeling or bubbling previous coating
  • Enamel that is lost its shine and feels rough
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling in Four Lane Ends

Different materials, different repairs

Pressed steel

Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we check it carefully.

Cast iron

A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.

Bath re-enamelling in Four Lane Ends, done in place

Re-enamelling gives a worn bath a new glossy surface without a refit. It’s the answer when the entire bath is tired rather than one spot. Common call-outs are for a coloured bath you want in white and a coating lifting around the plughole, in cast iron baths, basins & shower trays and pressed steel baths.

Your repair is guaranteed for a year, as with every job we do.

Where
Four Lane Ends (CW6)
Region
Cheshire West and Chester
Warranty
12 months on all our work
Quote
From £350. Free and fixed, from your photos
Telephone
0345 017 0787
Page updated
23 October 2026
Before and after: an old basin refinished to bright white

Honest limits

Some jobs aren’t right for a repair, for example:

  • Acrylic that moves when you stand in it
  • Holes rusted through the metal
  • A cast iron or steel bath that is cracked right through

Not sure? Send pictures and we’ll give you a straight answer before booking.

What we work on

  • Victorian roll-tops
  • Basins & shower trays
  • Acrylic baths
  • Pressed steel baths
  • Cast iron baths

DIY repairs versus a professional job

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

If you do try a kit, read the instructions carefully, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.

Common questions in Four Lane Ends

Can you resurface a pink bath in white?

Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.

Is it safe with children and pets around?

On the day, the room should be kept clear of pets and children, so the repair is not disturbed while it cures.

What does bath re-enamelling cost?

Resurfacing from £350. Every job gets a fixed price based on photos of the damage. Send a close-up of the damage and a wider photo and your postcode.

Does re-enamelling smell?

Some odour is normal while we spray, so we ventilate the room. It fades as the coating cures.

How long will the bath be out of use?

Usually one day, with the bath ready the next day. Deeply pitted baths may need a second day.

Do I need to be at home?

We need someone to let us in. After that, you can carry on with your day.

What happens after I send photos?

We check the damage, the material and your postcode, then reply with a quote with dates.

Do you work for landlords and businesses?

Yes. We work for landlords, agents, builders and businesses as well as homeowners.

Aftercare tips

Once the work has cured, treat it gently:

  • Keep toiletries on a shelf rather than in the bath
  • Leave the bath for the full curing time before using it
  • Stick to gentle, non-abrasive cleaners
  • Don’t leave a chip unrepaired

Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.

On a worn bath, rust spots keep spreading, and each one adds to the preparation. It’s simpler to resurface before they spread.

Why repair rather than replace?

If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Nothing else is disturbed. Our bath re-enamelling starts from £350. What it costs depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed price from your photos, so there are no surprises on the day.

Why choose Surface Doctor in Four Lane Ends

  • CHAS and Constructionline accredited
  • A year’s guarantee on all work
  • Everything repaired in place
  • Repair technicians who travel to you, UK-wide

See our full price list or bath cost comparison.

How we price bath re-enamelling

Resurfacing from £350. Prices are worked out job by job. What matters most is:

  • Previous DIY repairs that have to come out
  • How much damage there is
  • Whether it’s a chip, crack, burn or wear
  • How easy the damage is to reach

A repair generally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.

Quotes from your photos

Phone pictures are fine. Ensure they show:

  • One picture of the whole bath
  • Any earlier repairs or coatings
  • Where you are, by postcode
  • One sharp close-up of the damage

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them over. What comes back is a fixed price, not a guess.

Our work in Four Lane Ends

Four Lane Ends is about 6 miles south-west of Winsford, in Cheshire West and Chester. Anywhere in CW6, we come to you. We cover 224 places across Cheshire West and Chester. Our nearest city page is Liverpool, about 21 miles away.

Every address in CW6 is within our area. Other places close to Four Lane Ends include Tiverton (1 mile south-west), Tilstone Fearnall (1 mile south-east), Birch Heath (1 mile north-west), Tarporley (1 mile north) and Beeston-brook (1 mile south). Further out, we also cover Chester (10 miles west), Ellesmere Port (14 miles north-west), Winsford (6 miles north-east), Northwich (10 miles north-east), Boughton (10 miles west) and Frodsham (11 miles north).

Landmarks near Four Lane Ends

Typical jobs here are in homes near Tarporley High School and Sixth Form College, Tarporley CofE Primary School and St Jude's Church and the streets around them. Nearby you will also find Tarporley War Memorial Hospital (1 mile north) and The Old Fire Station (0.9 miles north).

Map of Four Lane Ends © OpenStreetMap contributors

How it works

We work cleanly and quietly, so you can carry on at home. We protect the area first, then the work takes most of the day. At the end we talk you through the curing time and the aftercare.

  1. We mask and protect the room and ventilate it.
  2. The bath is cleaned, degreased and any chips or rust repaired.
  3. We prepare the surface and apply a bonding primer.
  4. Several coats of new finish are sprayed on.
  5. Once cured, normally by the following day, the bath is ready.

Before we arrive

  • Avoid using the area for a few hours before we arrive
  • Tell us if there are stairs or a lift
  • Let us know about parking or access

How to get a price

Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can price the job without visiting.

Get a free quote

Read more

When to call us in Four Lane Ends

Many baths we resurface have simply been well used, and only the surface is worn. The body of the bath is generally perfectly sound.

The things clients usually mention when they call include:

  • An old resurfacing that’s failing
  • Wear marks under the taps
  • Stains that will not shift
  • A coloured bath you want in white

What your quote should include

  • What prep work is covered
  • What happens if they find more damage
  • Aftercare advice
  • Whether they match the colour on site

10 questions to ask before booking

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.