Staffordshire · England
Bath Re-enamelling for Freasley homes
Problem with your bath in Freasley? We repair it in place, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- Wear marks under the taps
- Staining under the taps and around the waste
Prices and what affects them
Prices start from £350. You’ll know the full cost before you book. We look at:
- Unusual colours or finishes
- Doing more than one item at once
- What kind of damage it is
- How many areas need work
The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed price from your pictures, so there are no surprises on the day.
How to get a fixed price
Photographing the damage takes a minute. Try to send:
- A clear, close picture of the problem area
- A coin beside the damage so we can judge size
- Details of any past repairs
- A wider photo showing the whole bath
There’s no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.
How we handle bath re-enamelling in Freasley
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. Our technicians work on basins & shower trays, pressed steel baths and Victorian roll-tops, and people most frequently call us about an outdated colour you’d like to change and wear marks under the taps.
We guarantee the work for a year. If something isn’t right in that time, we come back and put it right.
- Where
- Freasley (B78)
- Area hub
- Staffordshire
- Warranty
- One year on every repair
- Quote
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
About Freasley
Freasley is about 3 miles south-east of Tamworth, in Staffordshire. We travel to clients in Freasley, so nothing has to leave your home. Freasley is one of 512 places in Staffordshire we cover. Our nearest city page is Birmingham, about 13 miles away.
Our repair technicians cover all of B78. Other places close to Freasley include Whateley (1 mile west), Wood End (1 mile south), Piccadilly (1 mile south-west), Dosthill (2 miles west) and Hurley Common (2 miles south). We also work in nearby towns such as Burton upon Trent (15 miles north), Tamworth (3 miles north-west), Lichfield (10 miles north-west), Burntwood (13 miles north-west), Stowe (10 miles north-west) and Norton Canes (15 miles west).
What’s near Freasley
Locally, our jobs take us to homes close to The Wilnecote School, St Michael & All Angels Church and Heathfields Infant School. Freasley’s nearest station is Wilnecote station, about 1.8 miles north-west of the centre. Other landmarks nearby include Kingsbury Hall (2.7 miles south-west) and Sir Robert Peel Community Hospital (3.7 miles north-west). Green spaces nearby include Middleton Lakes RSPB reserve.
What we’re called out for in Freasley
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
It’s worth getting a quote if you see:
- Chips and rust in more than one place
- A coating lifting around the plughole
- A roll-top that is seen better days
- An outdated colour you’d like to change
Comparing quotes
- Who will actually do the work
- How the room is protected while they work
- If travel is included in the price
- What prep work is covered
Work for landlords and builders
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Builders use us to fix snagging damage before handover. We can visit several plots in one trip to keep costs down.
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
What your bath is made of matters
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel frequently rusts by the plughole, so we check it carefully.
Freasley: your questions answered
How long will the bath be out of use?
Normally one day, with the bath ready the day after. Deeply pitted baths may need a second day.
How do I get a price for bath re-enamelling in Freasley?
Resurfacing from £350. Every job gets a fixed quote based on pictures of the damage. Send a close-up of the damage and a wider photo with your B78 postcode.
What do you need from me?
Send pictures through the quote form or call 0345 017 0787, and we will do the rest.
Do you need to take the bath out?
Not at all. Everything is done in your bathroom, with the room masked and ventilated.
Do the materials smell?
It depends on the job, but often a little. Ventilation keeps it to a minimum.
How soon can you come?
It depends on the time of year and where you are. Send photos with your postcode and we will reply with the earliest dates.
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside if you’d like.
Can a failed resurfacing be redone?
Yes. Removing the old finish takes extra time, which we include in the price.
Also near Freasley
What else we do in Freasley
Repair or replace: which is better?
If you like your bathroom but not your bath’s surface, re-enamelling is the least disruptive fix. Nothing else is disturbed. Our bath re-enamelling starts from £350. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
Why book with us
- Dust sheets down, tidy finish
- Colour mixed on the day to match
- Nothing taken out or refitted
- One visit for most repairs
See our pricing or guide to resurfacing and replacement costs.
When we would advise against a repair
Not everything can be repaired, and we would rather say so up front. We can’t fix:
- Anything hidden under an old coating, until we remove it
- Leaks from fittings rather than the bath
- An acrylic bath that flexes badly underfoot
If in doubt, send photos and we’ll say what we think before you book.
Materials we work on in Freasley
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
What we do, step by step
We turn up at the time we agreed with you, introduces themselves and looks over the damage before anything else. Dust sheets and masking tape go down before we open a single tin. Most visits take the best part of a day, and the room is left clean and tidy.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Move bottles, mats and clutter away from the area
- Mention if the room is upstairs or in a flat
- Point us to the nearest place to park
How to get a price
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
