Staffordshire · England
Bath Re-enamelling in Whateley
Bath re-enamelling for Whateley, without a refit. Send us pictures for a fixed quote, then book a visit.
- Resurfacing from £350
- Brown or grey marks that don’t clean off
- Lots of chips and rust spots
FAQs for Whateley
Do you resurface freestanding baths?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
Can I get a quote without a visit?
Nearly always. If photos do not show enough, we’ll ask for another angle.
How durable is a resurfaced bath?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
Can you resurface a pink bath in white?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
What if the damage is worse than the pictures show?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
How do I book?
Just pictures, your postcode and a contact number. On the day, we only need access to the room.
Can landlords book you?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Can you repair several things at once?
Yes. Doing several items on one visit generally costs less than separate visits. Include pictures of each item.
Bath re-enamelling in Whateley, done in place
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. Common call-outs are for an old resurfacing that’s failing and lots of chips and rust spots, on basins & shower trays, acrylic baths and pressed steel baths.
All of our repairs are guaranteed for twelve months in Whateley and everywhere else. We return to put right any problem with the work.
- Where
- Whateley (B78)
- Region
- Staffordshire
- Cover
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Do you need bath re-enamelling in Whateley?
Enamel’s shine is only skin deep, and abrasive cleaning slowly wears it away. After years of use, the surface becomes porous and stains easily.
The things customers typically mention when they call are:
- Thin, worn enamel in places
- A bath in a colour that no longer suits
- Chips and rust in more than one place
- A dull, rough surface that will not come clean
What to look for in a quote
- Whether they match the colour on site
- If travel is included in the price
- How changes to the job are handled
- How long it needs to cure
For landlords and businesses
For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip.
We regularly work with letting and managing agents. Send the address, photos and access details and we’ll arrange it.
The process
We begin by going over the job with you, so you know exactly what we’re doing. Then the area is sheeted and masked and we start. Allow a full day.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
Preparing for the visit
- Tell us about any previous repairs or coatings
- Let us know which floor the room is on
- Plan for the room to be out of bounds to pets and children
Ask for a price
Upload pictures of the damage and one of the whole item, with your B78 postcode, and we will come back with a fixed quote.
Related advice
Materials and what they mean for the repair
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.
Honest limits
Not everything can be repaired, and we’ll tell you before we start. Repairs will not solve:
- A metal bath with a through crack
- A bath that is rusted through
- Problems we cannot see until an old finish comes off
Send us pictures and we will tell you honestly.
Surfaces we repair
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
Covering Whateley
Whateley is about 3 miles south of Tamworth, in Staffordshire. We visit customers in Whateley, so there’s no workshop to go to. Whateley is one of 512 towns and villages in Staffordshire we cover. You can also see our page for Birmingham, about 13 miles away.
Jobs in B78 are booked in the same way as anywhere else. Neighbouring places we cover include Freasley (1 mile east), Piccadilly (1 mile south), Dosthill (1 mile north-west), Wood End (1 mile south-east) and Cliff (1 mile south-west). Larger places within reach include Burton upon Trent (15 miles north), Tamworth (3 miles north), Lichfield (9 miles north-west), Burntwood (13 miles north-west), Stowe (9 miles north-west) and Norton Canes (14 miles north-west).
Landmarks near Whateley
Typical jobs here are in homes near The Wilnecote School, Heathfields Infant School and St Michael & All Angels Church and the streets around them. The nearest railway station is Wilnecote station, roughly 1.5 miles north-west of the centre. Nearby you’ll also find Robert Peel Society & Police Museum (2.4 miles west) and Ankerside Shopping Centre (3.1 miles north-west). Not far away are Middleton Lakes RSPB reserve.
Nearby places to Whateley
Also in Whateley
Should you replace it?
If the bath is sound, re-enamelling is generally much cheaper than replacing it, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Prices start from £350. What it costs depends on the type and amount of damage, what it’s made of and how many items we do on one visit. We give a fixed price from your photos, so there are no surprises on the day.
Why book with us
- One-year guarantee on every repair
- Same prices wherever you are
- Dust sheets down, tidy finish
- CHAS and Constructionline accredited
Read our prices page or bath cost comparison.
Can I fix it myself?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
What bath re-enamelling costs
Prices start from £350. We give every job a fixed price from pictures. These are the things that affect it:
- How many areas need work
- The material and finish
- Access to the area
- The type of damage
We do not add extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Send photos for a quote
You can take the photos on your phone. Just ensure we can see:
- One picture of the whole bath
- Daylight if possible, and no flash reflection
- A close-up of the damage, in focus
- The material, if you know it
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.
About our accreditations · Every repair comes with a one-year guarantee.
