Hertfordshire · England
Bath re-enamelling & resurfacing in Freezywater, Hertfordshire
Full bath re-enamelling and resurfacing in Freezywater, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Worn patches where water runs and sits
- A dull, rough surface that won’t come clean
Bath re-enamelling in Freezywater without replacing anything
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. If you’re dealing with a bath in a colour that no longer suits and wear marks under the taps, we can help, whatever the material.
You get a one-year guarantee, the same in Freezywater as everywhere else we work.
- Location
- Freezywater (EN3, EN8, EN1)
- Area hub
- Hertfordshire
- Cover
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Work for landlords and builders
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.
We work for landlords, letting agents and housing providers in Freezywater as well as homeowners. Repairing between tenancies keeps void periods short, and it usually costs far less than a refit.
Prices and what affects them
Prices start from £350. We give every job a fixed quote from photos. These are the things that affect it:
- Unusual colours or finishes
- How many items we do on one visit
- Where the damage is and how we get to it
- Whether it’s a chip, crack, burn or wear
Our prices are the same across the UK, with no extra for Freezywater. The job itself decides the price: how much damage, what it’s made of and how many items.
Send pictures for a quote
You can typically get a fixed quote without us visiting. To help us price it:
- Good light, ideally daylight, without flash glare
- One picture of the whole bath
- One sharp close-up of the damage
- Your postcode, so we can check dates
If you are in Freezywater and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Different materials, different repairs
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s what we repair.
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.
How it works
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job generally takes a full day. We clean up when we’re done and let you know when you can use it again.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Ensure the room can be ventilated
- Point us to the nearest place to park
- Keep children and pets away from the room on the day
Getting a price
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
Advice
Freezywater and the surrounding area
Freezywater is about 2 miles west of Waltham Abbey, in Hertfordshire. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. We work in all 381 towns and villages in Hertfordshire. Our jobs stretch from Freezywater to London (13 miles away).
All of EN3, EN8 and EN1 is covered, from the main roads to the quietest streets. Local streets include Park Road, Unity Road and Holly Road, and we cover them all. Freezywater is on the M25 and A1010, which makes it straightforward to reach. We also cover the places around Freezywater: Enfield Lock (1 mile south), Enfield Wash (1 mile south-west), Bullsmoor (1 mile west), Waltham Cross (1 mile north) and Enfield Island Village (1 mile south-east). Larger places within reach include St Albans (14 miles west), Welwyn Garden City (11 miles north-west), Hoddesdon (5 miles north), Cheshunt (3 miles north), Hatfield (10 miles north-west) and Hertford (9 miles north).
Local landmarks in Freezywater
Around Freezywater, we work in homes near Oasis Academy Enfield, Ss Peter and Paul Church and Aylands School and the streets around them. You’ll also find The Moon and Cross pub (0.6 miles north), Keys Meadow Primary School (within half a mile east) and Gunpowder Park (1.2 miles east). There is a railway station in Freezywater itself: Enfield Lock station. A little further out are Municipal Borough of Enfield (2.6 miles west) and Edmonton Green Shopping Centre (3.7 miles south). The countryside around Freezywater includes Lippitts Hill and Ainslie Wood.
Why repair rather than replace?
A new bath means a plumber, lifting out the old bath, re-tiling or making good the walls and several days without a working bathroom. Re-enamelling gives the bath a new finish with the bath left where it is. Our bath re-enamelling starts from £350. The price reflects the work involved, not where you live. You’ll see the full price before booking.
What you get with us
- We come to you, anywhere in the UK
- Dust sheets down, tidy finish
- A fixed quote before you book
- One price list for the whole UK
See our pricing or bath cost comparison.
Aftercare tips
To keep it looking its best for years:
- Do not let dyes or oils sit on the finish
- Avoid suction-cup mats
- A dripping tap should be fixed promptly
- Store bottles off the bath
The first few days matter most: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
Rust spots on a worn bath get worse with time and make the job bigger. It’s simpler to resurface before they spread.
When a repair is not the answer
In fairness, there are a few things a repair won’t fix:
- Leaking taps or wastes (a plumber’s job)
- An acrylic bath that flexes badly underfoot
- Holes rusted through the metal
Send us photos and we will tell you honestly.
What we work on
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
Common questions in Freezywater
Is my repair covered?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
Do you resurface freestanding baths?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
Is there a smell?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It fades as the coating cures.
Can you repair something that is been repaired before?
Yes, regularly. Removing the old work can add time, and that is in the quote.
Is there any odour?
It depends on the job, but frequently a little. Ventilation keeps it to a minimum, and it soon fades.
Will the bath be moved?
No. We resurface it in place, so the tiles and taps stay put.
Do you come to Freezywater?
Yes, we do. We send a technician to Freezywater for every job, with no extra charge for travel.
Can you fix a peeling bath coating?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
Also near Freezywater
More services for Freezywater
What we’re called out for in Freezywater
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
It’s worth getting a quote if you see:
- A peeling or bubbling previous coating
- A coloured bath you want in white
- Several chips and rust patches
- Stains that won’t shift
Before you book anyone
- How your room will be protected
- How long it needs to cure
- Whether they match the colour on site
- How to care for the finish
About our accreditations · Every repair comes with a one-year guarantee.
