Hertfordshire · England
Bath Re-enamelling in Bullsmoor
Full bath re-enamelling and resurfacing in Bullsmoor, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- Stains that won’t shift
Honest limits
It helps to know what we can’t do:
- Anything hidden under an old coating, until we remove it
- A metal bath with a through crack
- Holes rusted through the metal
Not sure? Send photos and we’ll give you a straight answer before you book.
Materials we repair
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
About our bath re-enamelling in Bullsmoor
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, so we don’t cut corners on it. Whether it’s a peeling or bubbling previous coating and stains that won’t shift, we can help.
Whatever the size of the job, it’s backed by a one-year guarantee.
- Location
- Bullsmoor (EN3, EN1, EN8)
- Area hub
- Hertfordshire
- Warranty
- One year on every repair
- Price
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Work for landlords and builders
Landlords, letting agents and housing providers in Bullsmoor use us as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.
Towns and villages near Bullsmoor
Also in Bullsmoor
What happens on the day
A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, carry out the work and tidy away. Allow a full day. Before we go, we will explain when it can be used and what to avoid for the first few days.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can normally be used the day after.
Getting ready for the visit
- Open a window if you can
- Clear toiletries, mats and anything else from around the area
- Tell us about parking, stairs or access
Ask for a price
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.
Read more
Aftercare tips
To keep it looking its best for years:
- Dry the bath after use to stop limescale
- Clean with a soft cloth and mild detergent
- Have chips seen to early
- Fix dripping taps quickly
A quick rinse and wipe after use helps, particularly where water is hard, to stop limescale building up.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Prices and what affects them
Resurfacing from £350. You will not pay by the hour. The price is based on:
- The colour and finish to match
- What kind of damage it is
- The size and number of damaged areas
- Access to the area
No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
How to get a fixed quote
Before you send pictures, a few simple things make all the difference:
- A coin beside the damage so we can judge size
- Daylight if possible, and no flash reflection
- One picture of the entire bath
- The postcode, so we can plan the visit
If you are in Bullsmoor and want a price, the easiest route is photos: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
Can I fix it myself?
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Repairs by material
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Bullsmoor: your questions answered
Does re-enamelling smell?
A little, during the work. We set up ventilation and the smell fades as it cures.
How long does re-enamelling take?
Typically a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Will the price change on the day?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Do the materials smell?
There may be a mild smell during the work, which fades afterwards.
Will the new finish last?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
Can you resurface a pink bath in white?
Yes, most people go for white. Mention the colour you want when you send photos.
Does someone need to be in?
We need someone to let us in. After that, you can carry on with your day.
Bullsmoor and nearby
Bullsmoor is about 2 miles north-east of Enfield, in Hertfordshire. Jobs in Bullsmoor are booked in like any other job: a fixed quote from your pictures, then a visit to do the work. We cover 381 places in Hertfordshire. We work right across the region, from Bullsmoor to London (12 miles away).
Our visits in EN3, EN1 and EN8 work the same way as everywhere else we cover. Local streets include Capel Road, Unity Road and Kempe Road, and we cover them all. With the M25 close by, Bullsmoor is simple for us to get to. Nearby, we also work in Bulls Cross (1 mile west), Enfield Wash (1 mile south-east), Freezywater (1 mile east), Enfield Highway (1 mile south) and Enfield Lock (1 mile south-east). We also work in nearby towns such as Watford (15 miles west), St Albans (13 miles north-west), Welwyn Garden City (11 miles north-west), Hoddesdon (6 miles north), Hatfield (10 miles north-west) and Hertford (9 miles north).
Near you in Bullsmoor
Our customers here include homes close to Aylands School, Honilands Primary School and The Pied Bull Public House and the streets around them. You will also find St George's Church (within half a mile south-east), Gunpowder Park (1.9 miles east) and The Lea Valley Academy (under half a mile north-east). Bullsmoor has its own railway station: Turkey Street station. Nearby you will also find Edmonton Green Shopping Centre (3.6 miles south) and Municipal Borough of Enfield (1.9 miles west). Not far away are Ainslie Wood and Lippitts Hill.
Common problems we fix in Bullsmoor
A dull surface stains and holds dirt, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
Send us a picture if you notice any of these:
- Staining under the taps and around the waste
- An original cast iron bath that needs restoring
- Lots of chips and rust spots
- Thin, worn enamel in places
Before booking anyone
- How soon you can use it again
- What prep work is covered
- How the colour is matched
- Who will actually do the work
About our accreditations · Every repair comes with a one-year guarantee.
