Greater London · England
Bath Re-enamelling in Enfield Highway
We travel to Enfield Highway for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- Stains that will not shift
- An original cast iron bath that needs restoring
What we do, step by step
There’s not much you need to do on the day. Show us the job, point us to the room, and we will get on with it. The job generally runs to most of the day.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
Preparing for the visit
- Tell us if there are stairs or a lift
- Tell us about any previous repairs or coatings
- Mention any parking restrictions or tricky access
How to get a price
The quickest way to a price is to send two or three pictures using our quote form or ring us. We’ll say straight away if a repair is the right fix.
Advice
Bath re-enamelling at your home in Enfield Highway
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. We are frequently asked to fix a bath that stays dull however much you clean it and a peeling or bubbling previous coating, across Victorian roll-tops, acrylic baths and basins & shower trays.
The work is covered for a year after we finish. Just call us if there’s a problem and we’ll sort it.
- Area
- Enfield Highway (EN3, EN1)
- County
- Greater London
- Warranty
- A year, on every repair
- Price
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What your bath is made of matters
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
Enfield Highway and the surrounding area
Enfield Highway is about 2 miles east of Enfield, in Greater London. We agree a date that works for you, and you’ll know when to expect us, so you’re not left waiting in all day. We work in all 764 towns and villages in Greater London. Our jobs stretch from Enfield Highway to London (about 11 miles away).
Jobs in EN3 and EN1 work the same way as everywhere else we cover. From Hoe Lane, Old Road and East Road or anywhere nearby, a technician can come to you. Nearby, we also work in Enfield Wash (1 mile north), Brimsdown (1 mile east), Enfield Lock (1 mile north-east), Bullsmoor (1 mile north) and Freezywater (1 mile north-east). Within a short drive, we also cover London (11 miles south), City of Westminster (11 miles south-west), Marylebone (11 miles south-west), Kensington (13 miles south-west), St Pancras (10 miles south) and Shoreditch (10 miles south).
Landmarks near Enfield Highway
Around Enfield Highway, we work in homes near The White Horse Public House, Aylward Academy and St James' Church and the streets around them. Also close by are Enfield Heights Academy (under half a mile west), Gunpowder Park (1.8 miles north-east) and Russet House School (0.7 miles west). The closest station to Enfield Highway is Brimsdown station, roughly 0.6 miles south-east of the centre. Well-known places in the area include Edmonton Green Shopping Centre (2.7 miles south) and St Michaels Hospital (1.9 miles west). Green spaces nearby include Ainslie Wood and Pole Hill.
- Parks and local facilities nearby include Municipal Borough of Enfield (2.2 miles west)
Do you need bath re-enamelling in Enfield Highway?
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. We strip what’s failing and start again.
Get in touch if you’ve noticed any of these:
- Staining under the taps and around the waste
- Several chips and rust patches
- A dull, rough surface that will not come clean
- A bath in a colour that no longer suits
What to look for in a quote
- Whether the price is fixed and includes VAT
- How the room is protected while they work
- Whether cleaning and preparation are in the price
- How changes to the job are handled
Places near Enfield Highway
Also in Enfield Highway
Looking after it afterwards
Aftercare is simple:
- Do not leave bottles, razors or sponges standing on the surface
- Rinse off hair dye, oils and bath bombs right away
- Leave the bath for the full curing time before using it
- Have chips seen to early
The first few days matter most: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Can I fix it myself?
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Questions from Enfield Highway
Is there a call-out fee?
We do not add a call-out fee. Your fixed quote includes everything.
What information do you need?
Send photos through the quote form or call 0345 017 0787, and we’ll do the rest.
How soon can you come?
We will give you dates with your quote. Tell us if you need it done quickly.
Does someone need to be in?
We need someone to let us in. After that, you can carry on with your day.
Will there be fumes?
Some odour is normal while we spray, so we ventilate the room. It fades as the coating cures.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Which areas do you work in?
Everywhere in the UK, Enfield Highway included. Travel is included in the price.
Someone resurfaced my bath and it’s peeling. Can you help?
In most cases. The old coating comes off before we resurface it. Mention it when you send pictures.
When we’d advise against a repair
In fairness, some problems need a different fix:
- An acrylic bath that flexes badly underfoot
- Steel that has corroded right through
- Leaking taps or wastes (a plumber’s job)
If in doubt, send pictures and we will say what we think.
Materials we repair
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
Repair or replace: which is better?
A replacement frequently means several trades over several days. Re-enamelling is one technician, normally one day. Prices start from £350. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why us?
- One-year guarantee on every repair
- Repair technicians who travel to you, UK-wide
- Colours mixed by hand to suit your surface
- Most jobs done in one visit
See our pricing or bath cost comparison.
Landlord and trade work in Enfield Highway
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Letting agents frequently send us pictures straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
About our accreditations · Every repair comes with a one-year guarantee.
