Lincolnshire · England

Bath re-enamelling & resurfacing in Friskney Tofts, Lincolnshire

Damaged bath in Friskney Tofts? We repair it in place, mix the colour on the day and back it with a one-year guarantee.

  • Resurfacing from £350
  • A coating lifting around the plughole
  • Wear marks under the taps
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath re-enamelling in Friskney Tofts?

How we handle bath re-enamelling in Friskney Tofts

We re-enamel a lot of period and roll-top baths, which would be difficult and expensive to replace. Doing them in place keeps an original feature. We work on cast iron baths, pressed steel baths and acrylic baths, and people most frequently call us about a peeling or bubbling previous coating and a dull, rough surface that won’t come clean.

We stand behind the work with a one-year guarantee, so you are covered after the visit.

Surface Doctor technician refinishing the outside of a roll-top bath
Location
Friskney Tofts (PE22)
Region
Lincolnshire
Warranty
12 months on all our work
Quotes
From £350. Fixed and free, based on photos
Call
0345 017 0787
Updated
23 October 2026

What we are called out for in Friskney Tofts

Enamel wears gradually. Abrasive cleaners, limescale and years of use dull the surface, starting where water runs and sits.

The most common problems we’re called about are:

  • An original cast iron bath that needs restoring
  • A dull, rough surface that won’t come clean
  • A bath in a colour that no longer suits
  • Brown or grey marks that do not clean off

Comparing quotes

  • When it can be used again
  • What aftercare is recommended
  • How changes to the job are handled
  • What the guarantee covers, and for how long

Our hiring checklist

FAQs for Friskney Tofts

Can you fix a peeling bath coating?

Typically, yes. We strip the failing coating and resurface it properly. Mention it when you send pictures.

Will the new finish last?

That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.

It’s been repaired before. Can you still fix it?

Yes, we often do. It can add a little time, which we include in the quote.

What happens if you find more damage?

If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.

Do you need to take the bath out?

No, it stays where it is. We work on the bath in place, with the room protected and ventilated.

Will there be fumes?

A little, during the work. Ventilation keeps it down, and it fades as the finish cures.

What does bath re-enamelling cost?

Prices start from £350. Because every job differs, we price from pictures. You know the full cost before anything is booked.

Are you accredited?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Repair or replace in Friskney Tofts?

There are times replacing is better: if the bath is cracked through, if you want a different size or shape, or if you are refitting the entire room anyway. In most other cases, resurfacing is the better choice. Prices start from £350. The price reflects the work involved, not where you live. You’ll see the full price before you book.

Why us?

  • Same prices wherever you are
  • Accredited with CHAS, Constructionline and SafeContractor
  • Everything repaired in place
  • We’ll tell you if it’s not worth repairing

Take a look at our full price list or resurfacing vs replacement cost guide.

How we price bath re-enamelling

Resurfacing from £350. We price every job individually. What matters most is:

  • How easy the damage is to reach
  • Doing more than one item at once
  • What the surface is made of
  • The size and number of damaged areas

What it costs depends on how much damage there is and what kind, the material and how many items we do on one visit. You get a fixed quote from your photos, so there are no surprises on the day.

How to get a fixed quote

Before you send photos, these tips help us give you a firm price:

  • One picture of the entire bath
  • Whether it’s been repaired or coated before
  • Good light, ideally daylight, without flash glare
  • Something in shot to show the size

A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them over. You will get a fixed price, not an estimate.

How to care for the repair

Most damage we see is avoidable. These habits help:

  • Fix dripping taps quickly
  • Use washing-up liquid and a soft cloth
  • Never use suction bath mats
  • Dry the bath after use to stop limescale

Use mild, non-abrasive cleaners, avoid suction bath mats, and do not leave bottles or razors standing on the surface.

On a worn bath, rust spots keep spreading and make the job bigger. It’s simpler to resurface before they spread.

The process

We agree an arrival time beforehand, so you’re not left guessing. On site, it takes most of the day for most jobs. We leave the room clean and you’ll know when it can be used.

  1. First we protect the bathroom and set up ventilation.
  2. Next we degrease the bath and fix chips and rust spots.
  3. We prepare the surface and apply a bonding primer.
  4. Several coats of new finish are sprayed on.
  5. We leave it to cure, and it’s typically ready the following day.

Getting ready for the visit

  • Tell us about any previous repairs or coatings
  • Tell us about parking, stairs or access
  • Let the surface dry out before the visit

Ask for a price

Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and we’ll reply with a fixed quote. Quotes are free and no obligation.

Get a fixed quote

Advice

Can I fix it myself?

We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.

If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.

About Friskney Tofts

Friskney Tofts is about 8 miles south-west of Skegness, in Lincolnshire. We visit homes and businesses in Friskney Tofts and the surrounding area, so you do not need to take anything anywhere. We work in 732 places in Lincolnshire.

Our repair technicians cover all of PE22 and the streets around it. That includes homes on Main Road and Parish's Lane and the roads around them. We also travel to Fold Hill (1 mile north), Friskney Eaudyke (1 mile north), Friskney (1 mile north), Small End (2 miles north-west) and Wrangle Lowgate (2 miles south-west). Further out, we also cover Boston (11 miles south-west), Skegness (8 miles north-east), Witham (11 miles south-west), Staniland (11 miles south-west), Kirton (14 miles south-west) and Skirbeck (10 miles south-west).

Landmarks near Friskney Tofts

Our customers here include homes close to Friskney All Saints Church of England (Aided) Primary School and Church of All Saints. The nearest railway station is Wainfleet station, roughly 3.6 miles north-east. A little further out are Magdalen College Museum (3.6 miles north-east).

Map of Friskney Tofts © OpenStreetMap contributors

What we can’t put right

Honesty matters more than a booking, so here’s what a repair can’t fix:

  • A bath split right through the body
  • Problems we cannot see until an old finish comes off
  • Acrylic that moves when you stand in it

Not sure? Send photos and we’ll give you a straight answer before booking.

Materials we repair

  • Basins & shower trays
  • Pressed steel baths
  • Cast iron baths
  • Victorian roll-tops
  • Acrylic baths

Landlords, agents and businesses in Friskney Tofts

Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.

We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which is easier on the people living there.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.