Lincolnshire · England
Bath re-enamelling & resurfacing in Kirton, Lincolnshire
Our repair technicians come to Kirton for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- A peeling or bubbling previous coating
- A bath in a colour that no longer suits
Prices and what affects them
Resurfacing from £350. We do not charge extra for travel to Kirton. The price comes down to:
- Doing more than one item at once
- The material and finish
- Whether old repairs or coatings need taking off
- Whether it’s a chip, crack, burn or wear
A repair is priced on what needs doing, not your postcode. You’ll see the full price before booking.
Getting a price from pictures
We price nearly every job from photos. This is what to send:
- A coin beside the damage so we can judge size
- A clear, close picture of the problem area
- Your postcode, so we can check dates
- Any details about the material
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. What comes back is a fixed quote, not a guess.
How we handle bath re-enamelling in Kirton
The bath stays where it is, so the taps, tiles and plumbing are not touched. It typically takes one visit, and can be used again the following day. If you are dealing with a roll-top that’s seen better days and wear marks under the taps, we can help.
We guarantee the work for a year. If there is a problem with the repair within the year, we return and sort it.
- Where
- Kirton (PE20)
- County
- Lincolnshire
- Guarantee
- A year, on every repair
- Price
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
When we’d advise against a repair
In fairness, there are a few things a repair will not fix:
- A cast iron or steel bath that’s cracked right through
- A poorly supported acrylic bath, until it’s firmed up
- Anything hidden under an old coating, until we remove it
If in doubt, send photos and we will say what we think.
Materials we work on in Kirton
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
Also near Kirton
What else we do in Kirton
Covering Kirton
Kirton is about 3 miles south of Boston, in Lincolnshire. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Kirton is one of 732 places in Lincolnshire we cover.
Here we cover the PE20 postcode area. Whether you live on High Street, Station Road and The Square or a nearby road, we can come to you. If you are just outside Kirton, we cover Frampton (1 mile north-east), Frampton West End (1 mile north), Kirton End (1 mile north-west), Seadyke (2 miles south-east) and Wyberton (2 miles north-east). Further out, we also cover Boston (3 miles north), Spalding (11 miles south-west), Holbeach (9 miles south), Pinchbeck (9 miles south-west), Witham (4 miles north) and Long Sutton (12 miles south-east).
Local landmarks in Kirton
Locally, our jobs take us to homes close to Church of St Peter and St Paul, The Old King's Head pub and Kirton Primary School. The closest station to Kirton is Boston station, about 3.6 miles north of the centre. Other landmarks nearby include Pilgrim Hospital (4.8 miles north-east) and Frampton Castle (1.3 miles east). Not far away are RSPB Frampton Marsh.
Repair or replace: which is better?
A replacement often means several trades over several days. Resurfacing takes one technician and typically a day, and the bath is usable the day after. Resurfacing from £350, with every job priced individually. A repair normally costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why Kirton customers choose us
- A year’s guarantee on all work
- Colour mixed on the day to match
- CHAS, Constructionline and SafeContractor accredited
- Typically one visit, start to finish
Read our prices page and resurfacing vs replacement cost guide.
Kirton: your questions answered
Can you re-enamel a roll-top bath?
Yes. Inside and out.
Can pets and children be at home?
We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.
What happens once I’ve sent pictures?
We check the damage, the material and your postcode, then reply with a quote and the next dates we have.
Do you charge for travel?
Travel is included in the price, and we charge the same wherever you are.
What happens if you find more damage?
We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.
Can you make a coloured bath white?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
Is repairing better than replacing?
Generally, when the rest is in good condition. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
Do the materials smell?
A little, depending on the job. Open windows and an extractor fan help.
For landlords and businesses
If you manage property in Kirton, we will quote for several properties at once. Send pictures for each one and we’ll price them together.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
How to look after the repair
A little care keeps the finish looking good. Our advice:
- Wash away dyes and oils after use
- Dry the bath after use to stop limescale
- Leave the bath for the full curing time before using it
- Fix dripping taps quickly
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Fix dripping taps quickly.
Do not try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.
Repairs by material
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.
Can I fix it myself?
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
What we do, step by step
On the day itself, there is little for you to do. Show us the job, point us to the room, and we will get on with it. Most visits take most of the day.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Tell us about any previous repairs or coatings
- Mention if the room is upstairs or in a flat
- Open a window if you can
Getting a price
For a price in Kirton, photos are the quickest way: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
