Hampshire · England
Bath Re-enamelling for Frithend homes
Fixed-price bath re-enamelling in Frithend and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- Staining under the taps and around the waste
- Chips and rust in more than one place
DIY kit or professional repair?
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.
About our bath re-enamelling in Frithend
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. We’re often asked to fix a dull, rough surface that won’t come clean and several chips and rust patches, across cast iron baths, Victorian roll-tops and acrylic baths.
We stand behind the work with a one-year guarantee.
- Area
- Frithend (GU35)
- County
- Hampshire
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Nearby places to Frithend
More services for Frithend
What bath re-enamelling costs
Prices start from £350. There’s no charge for travel to Frithend. The price depends on:
- How many items we do on one visit
- What the surface is made of
- Whether it’s a chip, crack, burn or wear
- How much damage there is
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send pictures and we will give you the exact figure.
Getting a price from photos
Two or three clear photos are normally enough. Try to include:
- Whether it’s been repaired or coated before
- The postcode, so we can plan the visit
- One picture of the whole bath
- A coin or ruler next to the damage for scale
The quickest way to a price is to send two or three photos using our quote form or ring us. We’ll tell you honestly if a repair is the right fix.
What we are called out for in Frithend
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
Customers generally contact us about:
- A bath in a colour that no longer suits
- A dull, rough surface that will not come clean
- Stains that won’t shift
- A period or roll-top bath worth keeping
Before you book anyone
- How soon you can use it again
- Whether the price covers travel
- Whether a trained technician does the job
- How the colour is matched
What we do, step by step
Nothing needs to be moved out of the room. Everything we use comes in the van with us, put protection down and get going once we’ve agreed what we’re doing. It typically takes most of the day, and you can get on with other things while we’re there.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- Once cured, normally by the day after, the bath is ready.
Preparing for the visit
- Clear the area around the damage
- Avoid using the area for a few hours before we arrive
- Point us to the nearest place to park
How to get a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price without visiting.
Advice
For landlords and businesses
Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit.
Keeping it looking good
Once the work has cured, treat it gently:
- Use washing-up liquid and a soft cloth
- Respect the curing time we give you
- Rinse off hair dye, oils and bath bombs immediately
- Never use suction bath mats
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Repair dripping taps promptly.
Rust spots on a worn bath get worse with time and make the job bigger. Resurfacing before they spread keeps it simpler.
Our work in Frithend
Frithend is about 4 miles south-west of Farnham, in Hampshire. We agree a date that works for you, and we’ll give you an arrival time in advance, so there is no waiting around. Frithend is one of 683 places in Hampshire where we work. We work right across the region, from Frithend to London (about 40 miles away).
Our visits in GU35 are booked in the same way as anywhere else. We regularly work on streets such as The Kilns and Frith End Road and the roads around them. Neighbouring places we cover include Batt's Corner (1 mile north-east), Bucks Horn Oak (1 mile north), Dockenfield (1 mile east), Blacknest (1 mile north-west) and Sleaford (1 mile south). We also work in nearby towns such as Basingstoke (13 miles north-west), Farnborough (10 miles north), Fleet (8 miles north), Aldershot (7 miles north-east), Alton (5 miles west) and Petersfield (11 miles south).
Near you in Frithend
Locally, our jobs take us to homes close to The Church Of The Good Shepherd and The Halfway House, among other places. Frithend’s nearest station is Bentley (Hampshire) station, roughly 1.9 miles north-west. Well-known places in the area include Barley Pound (4 miles north) and Chase Community Hospital (3.5 miles south). Green spaces nearby include Deadwater Valley.
Your questions about bath re-enamelling in Frithend
Do you come to Frithend?
Yes, we do. Repair technicians travel to Frithend from across the region, with no extra charge for travel.
What happens next?
You’ll get a fixed quote back, plus dates. You’re under no obligation.
Is it messy?
No. The work area is masked and covered, and we take our waste away with us.
Do you work for landlords and businesses?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
Is the work guaranteed?
All our work carries our one-year guarantee. We will explain what it covers when we quote.
Can pets and children be at home?
Please keep children and pets out of the room during the visit. The rest of the house is unaffected.
I rent my home. Can I book you?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged.
Does the bath have to be removed?
No. We resurface it in place, so nothing else is disturbed.
Repairs by material
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel often rusts by the plughole, so we check it carefully.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Honest limits
A few problems are outside what a surface repair can do:
- Problems we cannot see until an old finish comes off
- A poorly supported acrylic bath, until it’s firmed up
- Leaks from fittings rather than the bath
Send us pictures and we’ll tell you honestly.
Surfaces we repair
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
- Acrylic baths
About our accreditations · Every repair comes with a one-year guarantee.
