Hampshire · England
Bath re-enamelling & resurfacing in Kingsley, Hampshire
Our technicians come to Kingsley for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- A dull, rough surface that will not come clean
- Staining under the taps and around the waste
Landlord and trade work in Kingsley
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Bath re-enamelling in Kingsley without replacing anything
We re-enamel plenty of period and roll-top baths, which are heavy, hard to move and costly to replace. Resurfacing them in place keeps the original bath. If you’re dealing with an old resurfacing that’s failing and a period or roll-top bath worth keeping, we can normally put it right.
You are covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Location
- Kingsley (GU35)
- County
- Hampshire
- Warranty
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
What your bath is made of matters
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
How we price bath re-enamelling
Prices start from £350. You will know the full cost before you book. We look at:
- Any earlier repairs that need removing first
- Whether we combine several jobs
- The material
- The colour and finish to match
There are no surprise extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Quotes from your pictures
We price nearly every job from pictures. This is what to send:
- A coin or ruler next to the damage for scale
- Whether it’s been repaired or coated before
- Your postcode, so we can check dates
- Natural light rather than flash
Send us pictures of the damage and one of the whole item, and tell us you are in Kingsley, and we will reply with a fixed price.
Questions from Kingsley
Do you work in Kingsley?
Yes. We work across the UK and travel to Kingsley and the rest of Hampshire. Send pictures and we will quote, or call 0345 017 0787.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Can you re-enamel a roll-top bath?
Yes. Inside and out.
What does bath re-enamelling cost?
Resurfacing from £350. Because every job differs, we price from photos. You know the full cost before anything is booked.
Which areas do you work in?
The entire UK, including all of Hampshire. Just include your postcode and we will offer you dates.
Is it worth repairing rather than replacing?
Typically, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.
How durable is a resurfaced bath?
Look after it and it lasts. Avoid abrasive cleaners and suction mats.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as homeowners across Hampshire.
Repair or replace in Kingsley?
A refit takes several trades and several days. Re-enamelling takes one technician and generally one day, with the bath ready the following day. Our bath re-enamelling starts from £350. A repair usually costs much less than people expect, particularly next to the cost of replacement. Send photos and we will give you the exact figure.
What you get with us
- Honest advice, even when it means no job
- Repair technicians who travel to you, UK-wide
- One visit for most repairs
- A fixed quote before you book
Take a look at our pricing and guide to resurfacing and replacement costs.
How it works
Arrival times are agreed in advance, so you’re not left guessing. Once we are there, the work takes most of the day for most jobs. We leave the room clean.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s generally ready the next day.
Before we arrive
- Ensure the area is dry
- Keep children and pets away from the room on the day
- Tell us if there are stairs or a lift
Ask for a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them to us. What comes back is a fixed quote, not a guess.
Read more
About Kingsley
Kingsley is about 4 miles east of Alton, in Hampshire. We agree a date that works for you, and you’ll know when to expect us, so you are not left waiting in all day. We work in 683 places across Hampshire, from the larger towns to small villages. We work right across the region, from Kingsley to London (42 miles away).
Postcode districts we cover here: GU35. We regularly work on streets such as Forge Road, Woodfield and Churchfields. If you are just outside Kingsley, we cover Sleaford (1 mile east), Pinewood Village (1 mile south), Frithend (2 miles north-east), Bordon (2 miles south) and Lindford (2 miles south-east). We also work in nearby towns such as Basingstoke (13 miles north-west), Farnborough (12 miles north-east), Fleet (10 miles north), Aldershot (9 miles north-east), Alton (4 miles west) and Petersfield (10 miles south).
Near you in Kingsley
Typical jobs here are in homes near Church of All Saints, The New Inn and Mill Chase Academy. The closest station to Kingsley is Bentley (Hampshire) station, roughly 3 miles north. A little further out are Chase Community Hospital (2.3 miles south). Not far away are Deadwater Valley and Selborne Hill.
What a repair can’t fix
A repair isn’t right for every job, for example:
- Plumbing leaks, which need a plumber
- Anything hidden under an old coating, until we remove it
- Holes rusted through the metal
Not sure? Send photos and we’ll give you a straight answer.
What we work on
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
DIY repairs versus a professional job
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
What we’re called out for in Kingsley
A dull surface stains and holds dirt, and cleaning harder only makes it worse. That’s the point where re-enamelling makes sense.
Contact us if you’ve noticed:
- A roll-top that is seen better days
- Thin, worn enamel in places
- An outdated colour you’d like to change
- Several chips and rust patches
Questions to ask before you book
- Whether a trained technician does the job
- Whether there are any call-out or travel charges
- What protection goes down before work starts
- How long the guarantee is and what it covers
Also in Kingsley
About our accreditations · Every repair comes with a one-year guarantee.
