Devon · England
Bath re-enamelling & resurfacing in Frogmore, Devon
Bath re-enamelling in Frogmore without the cost of replacing. Send us pictures for a fixed price, then we come to you.
- Resurfacing from £350
- Several chips and rust patches
- A roll-top that’s seen better days
Bath re-enamelling in Frogmore without replacing anything
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, and we take our time over it. If you are dealing with a coloured bath you want in white and chips and rust in more than one place, we can generally put it right, on Victorian roll-tops, acrylic baths and cast iron baths alike.
You are covered for a year from the day of the repair. If anything isn’t right, ring us and we will come back.
- Location
- Frogmore (TQ7)
- County
- Devon
- Guarantee
- One year on every repair
- Price
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Landlords, agents and businesses in Frogmore
Landlords, letting agents and housing providers in Frogmore use us as well as householders. A repair between tenants keeps the property empty for less time, and it generally costs far less than a refit.
If you manage property in Frogmore, we can repair and quote for several addresses together. Send pictures for each one and we will come back with a combined price.
About Frogmore
Frogmore is about 12 miles south-west of Brixham, in Devon. From the centre of Frogmore to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Our technicians cover all 586 towns and villages in Devon.
Here we cover the TQ7 postcode area. That includes homes on Old Frogmore Road and Winslade Close and the roads around them. Other places close to Frogmore include Sherford (1 mile north), West Charleton (1 mile west), Kingsbridge (3 miles west), Higher Batson (3 miles south-west) and West Alvington (3 miles west). Larger places within reach include Ivybridge (12 miles north-west), Totnes (11 miles north), Dartmouth (8 miles north-east), Bridgetown (11 miles north), Townstal (8 miles north-east) and Buckfastleigh (15 miles north).
What’s near Frogmore
In Frogmore, that means homes near Globe Inn and Church of St Martin. Further afield, we also cover the area around The Old Grammar School (2.9 miles north-west) and Salcombe Castle (3.9 miles south-west). Open spaces near Frogmore include Slapton Ley.
Do you need bath re-enamelling in Frogmore?
Frequently the bath has just had decades of use, with nothing wrong except the surface. Underneath, a cast iron or steel bath is typically as strong as ever.
Get in touch if you’ve noticed:
- Brown or grey marks that do not clean off
- An old resurfacing that is failing
- A dull, rough surface that won’t come clean
- Thin, worn enamel in places
Before you book anyone
- Is the price fixed, and does it include VAT?
- How your room will be protected
- Whether they match the colour on site
- Who turns up on the day
Also in Frogmore
What bath re-enamelling costs
Resurfacing from £350. We don’t charge extra for travel to Frogmore. The price comes down to:
- The colour and finish to match
- How many items we do on one visit
- The material
- Whether old repairs or coatings need taking off
Our prices are the same across the UK, so there is no premium for Frogmore. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Quotes from your photos
A couple of clear pictures is all it takes. Try to include:
- Any details about the material
- Whether it’s been repaired or coated before
- One picture of the whole bath
- Good light, ideally daylight, without flash glare
You do not need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.
How to care for the repair
To keep it looking its best for years:
- A quick wipe after use keeps limescale away
- Leave the bath for the full curing time before using it
- Have chips seen to early
- Repair dripping taps early
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
On a worn bath, rust spots keep spreading and make the job bigger. Resurfacing before they spread keeps it simpler.
How it works
Nothing needs to be moved out of the room. We bring everything we need with us, lay protective sheets and start once you are happy with the plan. It usually takes a full day, and you can get on with other things while we are there.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
How to prepare
- Tell us about parking, stairs or access
- Mention if the room is upstairs or in a flat
- Make sure the area is dry
How to get a price
Most clients in Frogmore get their price from pictures. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Advice
Different materials, different repairs
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Repair or replace in Frogmore?
If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Nothing else is disturbed. Resurfacing from £350, with every job priced individually. The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed price from your photos, so there are no surprises on the day.
Why book with us
- Every repair guaranteed for a year
- Free fixed quotes from pictures
- Technicians who travel to you, UK-wide
- We’ll tell you if it’s not worth repairing
See our pricing and guide to resurfacing and replacement costs.
FAQs for Frogmore
Do you work in Frogmore?
We do. We send a technician to Frogmore for every job, and the price is the same as everywhere else.
Is it messy?
No. The work area is masked and covered, and we leave the room clean.
How much does bath re-enamelling cost in Frogmore?
Prices start from £350. Because every job differs, we price from pictures. You will get a fixed figure before you book.
Will the bath be moved?
No, it stays where it is. Everything is done in your bathroom, with the room protected and ventilated.
Can a failed resurfacing be redone?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
How long does re-enamelling last?
Look after it and it lasts. Avoid abrasive cleaners and suction mats.
When can you do it?
We will give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
Is a repair better than a new one?
In most cases, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we will tell you.
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
About our accreditations · Every repair comes with a one-year guarantee.
