Norfolk · England
Bath Re-enamelling in Frost Row
Full bath re-enamelling and resurfacing in Frost Row, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- A bath in a colour that no longer suits
- A bath that stays dull however much you clean it
Materials and what they mean for the repair
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel frequently rusts by the plughole, so we check it carefully.
Bath re-enamelling at your home in Frost Row
Re-enamelling is a one-day job for most baths. Taps, tiles, panels and plumbing all stay in place. We’re frequently asked to fix an outdated colour you’d like to change and a peeling or bubbling previous coating, across cast iron baths, acrylic baths and Victorian roll-tops.
We guarantee the work for a year. If something isn’t right in that time, we come back and put it right.
- Area
- Frost Row (NR9)
- Region
- Norfolk
- Cover
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Common questions in Frost Row
What information do you need?
Some pictures, your postcode and how to reach you. On the day, access to the room.
Will the bath be moved?
No. We resurface it in place, so nothing else is disturbed.
How quickly can you book me in?
We’ll give you dates with your quote. Tell us if you need it done quickly.
Can you do more than one item on the same visit?
Yes, and it’s frequently cheaper. Just add the extra items to your photos and you’ll get one combined price.
How much does bath re-enamelling cost in Frost Row?
Resurfacing from £350. Every job gets a fixed price from your photos. Send a close-up and a photo of the whole item and your postcode.
Does re-enamelling smell?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It fades as the coating cures.
How long will the bath be out of use?
Most baths are done in a day and can be used the day after. We will confirm timings when we quote.
Do I need to be at home?
Yes. We need access to the room while we work, at a time that suits you.
Looking after it afterwards
Looking after the surface is easy, and it makes a real difference:
- A dripping tap should be fixed promptly
- Wipe the bath dry after use in hard water areas
- Keep toiletries on a shelf rather than in the bath
- Never use suction bath mats
Dry the bath after use if possible, especially in hard water areas, and rinse off any bath products.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.
Also in Frost Row
About Frost Row
Frost Row is about 5 miles north of Attleborough, in Norfolk. From the centre of Frost Row to the outlying streets, the service is the same: a fixed price, a tidy visit and a guarantee. Frost Row is one of 797 places in Norfolk where we work.
Every address in NR9 is covered, from the main roads to the quietest streets. Other places close to Frost Row include Hingham (1 mile east), Scoulton (2 miles south-west), Little Ellingham (2 miles south), Stalland Common (2 miles south) and The Street (2 miles west). Within a short drive, we also cover Norwich (14 miles east), Thetford (14 miles south-west), Dereham (7 miles north), Wymondham (7 miles east), Attleborough (5 miles south) and Watton (6 miles west).
Local landmarks in Frost Row
We visit homes around Church of St. Andrew and Hingham Primary School. Well-known places in the area include Morley Old Hall (3.7 miles south-east) and Bickley Day Hospital (4.8 miles south-east). Not far away are Scoulton Mere.
Prices and what affects them
Resurfacing from £350. We charge the same across the UK, including Frost Row. What changes the price is:
- Whether we combine several jobs
- Previous DIY repairs that have to come out
- Whether it’s a chip, crack, burn or wear
- The colour and finish to match
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Quotes from your photos
Two or three clear pictures are typically enough. It helps if you send:
- Any earlier repairs or coatings
- The material, if you know it
- The postcode, so we can plan the visit
- A close-up of the damage, in focus
If you are in Frost Row and want a price, the easiest route is photos: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Do you need bath re-enamelling in Frost Row?
By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Resurfacing sorts them out together.
Typical reasons for a call-out include:
- Wear marks under the taps
- Lots of chips and rust spots
- A bath in a colour that no longer suits
- Stains that will not shift
What your quote should include
- Aftercare advice
- Who turns up on the day
- How soon you can use it again
- What prep work is covered
Landlord and trade work in Frost Row
For anyone letting property in or around Frost Row, we’ll quote for several properties at once. Just send pictures for each address and we’ll price them together.
We carry out planned and one-off repairs for housing associations and facilities teams in Norfolk and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
Why repair rather than replace?
When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Nothing else is disturbed. Prices start from £350. Our prices are the same across the UK, so there’s no premium for Frost Row. What changes the price is the job itself: the material, the amount of damage and how many items.
What you get with us
- Fixed prices from your photos
- Colours mixed by hand to suit your surface
- One price list for the whole UK
- Dust sheets down, tidy finish
Take a look at our prices page and resurfacing vs replacement cost guide.
How it works
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, and get on with the job, which normally takes a full day. If anything looks different from your photos, we will talk to you before going ahead.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s generally ready the day after.
How to prepare
- Clear the area around the damage
- Let us know which floor the room is on
- Plan for the room to be out of bounds to pets and children
Getting a price
Send us pictures of the damage and a wider shot of the entire item, with your NR9 postcode, and we’ll reply with a fixed quote.
Advice
When we would advise against a repair
We’ll always be straight with you, so here’s what a repair won’t do:
- A bath split right through the body
- Leaking taps or wastes (a plumber’s job)
- A poorly supported acrylic bath, until it’s firmed up
Not sure? Send pictures and we will give you a straight answer before booking.
Materials we repair
- Acrylic baths
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
About our accreditations · Every repair comes with a one-year guarantee.
