Norfolk · England
Bath re-enamelling & resurfacing in Stalland Common, Norfolk
Bath re-enamelling across Stalland Common and nearby, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- Chips and rust in more than one place
- Stains that will not shift
Bath re-enamelling in Stalland Common, done in place
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. If you’re dealing with a coloured bath you want in white and chips and rust in more than one place, we can help.
You’re covered after we leave: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote.
- Location
- Stalland Common (NR17)
- County
- Norfolk
- Guarantee
- A year, on every repair
- Price
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Aftercare tips
Much of the damage we repair could have been avoided. A few tips:
- Get any chip repaired quickly
- Keep toiletries on a shelf rather than in the bath
- Use washing-up liquid and a soft cloth
- A dripping tap should be fixed promptly
Stick to mild, non-abrasive cleaners, don’t use suction bath mats, and keep bottles and razors off the surface.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. It’s simpler to resurface before they spread.
Nearby places to Stalland Common
Other services in Stalland Common
What we can’t put right
It helps to know what we can’t do too:
- Acrylic that moves when you stand in it
- Steel that has corroded right through
- Damage hidden under a previous coating, until it’s stripped back
Send us photos and we’ll tell you honestly.
Materials we work on in Stalland Common
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
Covering Stalland Common
Stalland Common is about 3 miles north-west of Attleborough, in Norfolk. We visit homes and businesses in Stalland Common and the surrounding area, so there is no workshop to go to. We cover all 797 towns and villages across Norfolk, from the larger towns to small villages.
Our visits in NR17 work the same way as everywhere else we cover. We also cover the places around Stalland Common: Bow Street (1 mile south), Little Ellingham (1 mile west), Anchor Corner (1 mile south-west), Great Ellingham (1 mile south) and Rockland St Peter (2 miles south-west). Further out, we also cover Norwich (15 miles north-east), Thetford (13 miles south-west), Dereham (9 miles north), Wymondham (6 miles east), Attleborough (3 miles south-east) and Watton (6 miles west).
Landmarks near Stalland Common
Locally, our jobs take us to homes close to Great Ellingham Primary School and Church of St Peter, among other places. The nearest railway station is Attleborough station, roughly 3.1 miles south-east. Other landmarks nearby include Morley Old Hall (2.3 miles east) and Bickley Day Hospital (2.8 miles south-east). For a walk, there’s Scoulton Mere.
Should you replace it?
If the bath is sound, re-enamelling is normally much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Resurfacing from £350, with every job priced individually. What it costs depends on how much damage there is and what kind, the material and how many items we do on one visit. You get a fixed quote from your pictures, so you know the cost before booking.
What you get with us
- Same prices wherever you are
- Straight answers about what a repair can do
- Most jobs done in one visit
- Technicians who travel to you, UK-wide
Read our pricing or guide to resurfacing and replacement costs.
What happens on the day
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job usually takes most of the day. We clean up when we are done and tell you when it’s ready to use.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
Before we arrive
- Let us know if it has been repaired before
- Clear the area around the damage
- Tell us about parking, stairs or access
Ask for a price
If you are in Stalland Common and want a price, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Advice
Common questions in Stalland Common
Will there be fumes?
Some odour is normal while we spray, which is why we ventilate the bathroom. It clears as the finish cures.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
Can you redo someone else’s repair?
Yes, regularly. Removing the old work can add time, and that’s in the quote.
Can I get a quote without a visit?
Nearly always. We only ask to see it in person if the photos can’t show what we need.
How durable is a resurfaced bath?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
Can you change the colour of my bath?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
When can you do it?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
How long does re-enamelling take?
Generally one day, with the bath ready the day after. Deeply pitted baths may need a second day.
Do you need bath re-enamelling in Stalland Common?
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
It’s worth getting a quote if you see:
- Chips and rust in more than one place
- An old resurfacing that is failing
- A period or roll-top bath worth keeping
- A coloured bath you want in white
Comparing quotes
- What preparation is included
- Whether a trained technician does the job
- How to care for the finish
- Whether the price covers travel
What bath re-enamelling costs
Prices start from £350. You won’t pay by the hour. The price is based on:
- How much damage there is
- Unusual colours or finishes
- How many items we do on one visit
- What the surface is made of
A repair generally costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Quotes from your pictures
Phone pictures are fine, there is no need for anything special. Just make sure we can see:
- Good light, ideally daylight, without flash glare
- One sharp close-up of the damage
- A coin beside the damage so we can judge size
- Whether it’s been repaired or coated before
The quickest way to a price is to send two or three pictures using our quote form or ring us. We’ll say straight away if a repair is the right fix.
For landlords and businesses
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip.
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Different materials, different repairs
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
About our accreditations · Every repair comes with a one-year guarantee.
