Norfolk · England
Bath Re-enamelling in Hingham
Local bath re-enamelling for Hingham: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- A dull, rough surface that will not come clean
- An original cast iron bath that needs restoring
What we do, step by step
From the moment we arrive, we keep the work contained to the one room. Surfaces nearby are masked off, the work takes a full day, and we finish with a tidy-up and a look at the finished work together.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the following day.
How to prepare
- Have a window or extractor fan available
- Tell us about parking, stairs or access
- Point us to the nearest place to park
Getting a price
Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and you will get a fixed quote back. There is no charge for the quote and no obligation.
Read more
Bath re-enamelling in Hingham without replacing anything
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. We work on cast iron baths, pressed steel baths and Victorian roll-tops, and common reasons people get in touch are an old resurfacing that’s failing and worn patches where water runs and sits.
The work is covered for a year after we finish. Just call us if there is a problem and we will come back.
- Where
- Hingham (NR9)
- County
- Norfolk
- Guarantee
- One year on every repair
- Quote
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Hingham questions
Can a failed resurfacing be redone?
Usually, yes. We strip the failing coating and resurface it properly. Mention it when you send pictures.
Will the new finish last?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
Are you a vetted contractor?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can you quote from pictures?
Nearly always. We only ask to see it in person if the pictures cannot show what we need.
What happens next?
You get a fixed quote and available dates. If we need another angle, we will ask.
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside if you’d like.
Do you come to Hingham?
Yes. We cover the whole UK and come to Hingham. Send photos and we will quote, or call 0345 017 0787.
Do you cover the entire of Norfolk?
We work UK-wide. Prices do not change with location.
What we’re called out for in Hingham
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
Clients typically contact us about:
- Lots of chips and rust spots
- A coloured bath you want in white
- A bath that stays dull however much you clean it
- Brown or grey marks that do not clean off
What to look for in a quote
- What protection goes down before work starts
- What prep work is covered
- Who will actually do the work
- What aftercare is recommended
Towns and villages near Hingham
Also in Hingham
Repairing versus replacing in Hingham
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, with the bath ready the day after. Our bath re-enamelling starts from £350. The price depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your photos, so you know the cost before you book.
What you get with us
- We come to you, anywhere in the UK
- One visit for most repairs
- Rooms protected and left tidy
- No need to remove anything
Take a look at our full price list or bath cost comparison.
Covering Hingham
Hingham is about 5 miles north of Attleborough, in Norfolk. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. We cover all 797 towns and villages in Norfolk.
Every address in NR9 is within our area, from the main roads to the quietest streets. Streets in the area include Hardingham Street, Admirals Walk and Norwich Street, and we cover them all. Hingham is on the B1108, which makes it straightforward to reach. If you are just outside Hingham, we cover Frost Row (1 mile west), Stalland Common (2 miles south), Little Ellingham (2 miles south-west), Bow Street (3 miles south) and Scoulton (3 miles west). Further out, we also cover Norwich (13 miles east), Thetford (15 miles south-west), Dereham (7 miles north), Wymondham (6 miles east), Sprowston (15 miles east) and Thorpe St Andrew (15 miles east).
Near you in Hingham
Our customers here include homes close to Church of St. Andrew and Hingham Primary School, among other places. Hingham’s nearest station is Attleborough station, roughly 4.8 miles south. Well-known places in the area include Bickley Day Hospital (4.5 miles south) and Morley Old Hall (3.1 miles south-east). The countryside around Hingham includes Scoulton Mere.
When we would advise against a repair
A few problems are outside what a surface repair can do:
- Acrylic that moves when you stand in it
- Damage hidden under a previous coating, until it’s stripped back
- Leaks from fittings rather than the bath
If in doubt, send photos and we will say what we think.
Materials we repair
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
How we price bath re-enamelling
Prices start from £350. Each job gets its own fixed price. These are the things that affect it:
- How hard the colour is to match
- Doing more than one item at once
- The material
- How many areas need work
A repair is priced on what needs doing, not your postcode. The full price is agreed before booking, with no extras added later.
Getting a price from pictures
Phone pictures are fine, there is no need for anything special. Just make sure we can see:
- The material, if you know it
- Good light, ideally daylight, without flash glare
- Where you are, by postcode
- A wider photo showing the entire bath
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Aftercare tips
Once the work has cured, treat it gently:
- Keep toiletries on a shelf rather than in the bath
- Leave the bath for the full curing time before using it
- A dripping tap should be fixed promptly
- Keep suction mats out of the bath
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
Rust spots on a worn bath get worse with time and make the job bigger. Resurfacing before they spread keeps it simpler.
For landlords and businesses
Housing associations and facilities teams use us for planned and reactive repairs in Norfolk and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit.
About our accreditations · Every repair comes with a one-year guarantee.
