Norfolk · England
Bath Re-enamelling for Fulmodeston homes
Full bath re-enamelling and resurfacing in Fulmodeston, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- An outdated colour you’d like to change
Bath re-enamelling in Fulmodeston without replacing anything
After cleaning, repairing and priming, we spray on the new finish. The preparation is what makes it last, and we take our time over it. We’re often asked to fix wear marks under the taps and lots of chips and rust spots, across acrylic baths, cast iron baths and basins & shower trays.
The work is guaranteed for twelve months. If there is a problem with the repair within the year, we return and sort it.
- Location
- Fulmodeston (NR21)
- Region
- Norfolk
- Guarantee
- A year, on every repair
- Quote
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Looking after it afterwards
Good habits make a big difference to how long a repair lasts:
- Avoid suction-cup mats
- Get any chip repaired quickly
- Don’t leave bottles, razors or sponges standing on the surface
- Don’t let dyes or oils sit on the finish
Treat the new finish gently at first: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Materials and what they mean for the repair
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Can I fix it myself?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
When a repair is not the answer
Some problems need a builder, plumber or fitter rather than us:
- A bath split right through the body
- A poorly supported acrylic bath, until it’s firmed up
- Leaks from fittings rather than the bath
If in doubt, send pictures and we’ll say what we think.
Surfaces we repair
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
Places near Fulmodeston
Other services in Fulmodeston
Why repair rather than replace?
Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing normally wins. Resurfacing from £350, with every job priced individually. Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Why Fulmodeston clients choose us
- One-year guarantee on every repair
- Most jobs done in one visit
- Same prices wherever you are
- We’ll tell you if it’s not worth repairing
See our full price list or guide to resurfacing and replacement costs.
Your questions about bath re-enamelling in Fulmodeston
It’s been repaired before. Can you still fix it?
Most of the time. Let us know what was used before.
Is repairing better than replacing?
Generally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
How durable is a resurfaced bath?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
Is the work guaranteed?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
Can you change the colour of my bath?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
Do I have to be there?
We need someone to let us in. After that, you can carry on with your day.
Do you come to Fulmodeston?
We do. We send a technician to Fulmodeston for every job, with no extra charge for travel.
The process
You don’t need to empty the room beforehand. We bring everything we need with us, lay protective sheets and get going once we have agreed what we are doing. It generally takes most of the day, and you can get on with other things while we are there.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the day after, the bath is ready.
How to prepare
- Clear toiletries, mats and anything else from around the area
- Keep a parking space free if you can
- Avoid using the area for a few hours before we arrive
Get a quote
There’s no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.
Read more
Covering Fulmodeston
Fulmodeston is about 11 miles north of Dereham, in Norfolk. We visit clients in Fulmodeston and nearby villages, so nothing has to leave your home. Fulmodeston is one of 797 towns and villages in Norfolk where we work.
Postcode districts we cover here: NR21. From Barney Road, Croxton Road and Stibbard Road or a nearby road, a technician can come to you. We also travel to Croxton (1 mile west), Barney (1 mile north), Stibbard (2 miles south-west), Kettlestone (2 miles west) and Thursford (2 miles north). Larger places within reach include Dereham (11 miles south), Sheringham (13 miles north-east), Taverham (15 miles south-east), Fakenham (4 miles west), Aylsham (13 miles east) and Holt (7 miles north-east).
Local landmarks in Fulmodeston
Typical jobs here are in homes near Christ Church. Well-known places in the area include Thursford Collection (2.3 miles north). The countryside around Fulmodeston includes Thursford Wood.
Signs you need bath re-enamelling in Fulmodeston
Many baths we resurface have simply been well used, and only the surface is worn. Underneath, a cast iron or steel bath is normally as strong as ever.
These are the problems we are asked about most:
- An old resurfacing that’s failing
- Several chips and rust patches
- Worn patches where water runs and sits
- A dull, rough surface that will not come clean
Comparing quotes
- What aftercare is recommended
- What protection goes down before work starts
- What the guarantee covers, and for how long
- What preparation is included
How we price bath re-enamelling
Resurfacing from £350. You will know the full cost before booking. We take into account:
- How easy the damage is to reach
- Whether we combine several jobs
- The colour and finish to match
- Any earlier repairs that need removing first
The price reflects the work involved, not where you live. The full price is agreed before booking, with nothing added on the day.
Send photos for a quote
The better the pictures, the more accurate the price. Here’s what helps:
- Where you are, by postcode
- Something in shot to show the size
- The material, if you know it
- Natural light rather than flash
Email us photos of the damage and a wider shot of the whole item, and tell us you are in Fulmodeston, and we will reply with a fixed price.
About our accreditations · Every repair comes with a one-year guarantee.
