Lincolnshire · England
Bath Re-enamelling for Fulney homes
Bath re-enamelling across Fulney and nearby, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- Several chips and rust patches
- Worn patches where water runs and sits
What bath re-enamelling costs
Prices start from £350. We do not charge extra for travel to Fulney. The price depends on:
- The material
- What kind of damage it is
- How many items we do on one visit
- The size and number of damaged areas
What it costs depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed quote from your pictures, so there are no surprises on the day.
Send photos for a quote
When you take your pictures, these tips help us give you a firm price:
- Your postcode, so we can check dates
- A coin or ruler next to the damage for scale
- Details of any past repairs
- Natural light rather than flash
There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
About our bath re-enamelling in Fulney
We re-enamel a lot of period and roll-top baths, which are heavy, hard to move and costly to replace. Resurfacing them in place keeps the original bath. We regularly repair pressed steel baths, basins & shower trays and Victorian roll-tops, and common reasons people get in touch are a period or roll-top bath worth keeping and a coating lifting around the plughole.
Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before booking.
- Area
- Fulney (PE11, PE12)
- County
- Lincolnshire
- Guarantee
- One year on every repair
- Price
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Should I try a DIY kit first?
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Fulney and the surrounding area
Fulney is about 1 mile north-east of Spalding, in Lincolnshire. From the centre of Fulney to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Our technicians cover 732 places in Lincolnshire, from the larger towns to small villages. Our nearest city page is Birmingham, about 77 miles away.
Jobs in PE11 and PE12 work the same way as everywhere else we cover. You will find streets such as Low Road, Osier Road and Royce Road, all of which we cover. Other places close to Fulney include Spalding (1 mile south-west), Low Fulney (1 mile south-east), Clay Lake (1 mile south), Pinchbeck (2 miles north-west) and Wykeham (2 miles north-east). We also work in nearby towns such as Boston (13 miles north), Bourne (10 miles west), Holbeach (6 miles east), Austerby (10 miles west), Market Deeping (11 miles south-west) and Paston (14 miles south).
Around Fulney
In Fulney, that means homes near Ship Albion Public House, St Paul's Community Primary and Nursery School and United Reformed Church. Other local landmarks include Gleed Girls' Technology College (0.5 miles south) and Gleed Boys' School (0.5 miles south). The nearest railway station is Spalding station, roughly 0.8 miles south-west of the centre. Well-known places in the area include Moulton Castle (3.7 miles east) and Chain Bridge Forge Museum (within half a mile south-west).
Keeping it looking good
So the finish stays in good condition for years:
- Don’t leave a chip unrepaired
- Wipe the bath dry after use in hard water areas
- Don’t use the bath until it has fully cured
- Keep suction mats out of the bath
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Repair dripping taps promptly.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
What happens on the day
We begin by going over the job with you, so you know exactly what we are doing. Then the area is sheeted and masked and the work begins. It normally takes a full day, and we will tell you if anything changes.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Make sure the area is dry
- Make sure the room can be ventilated
- Keep children and pets away from the room on the day
How to get a price
Pricing is simple: snap the damage close up and then the whole item, send them to us with your postcode, and we’ll reply with a fixed price. Quotes are free and you are under no obligation.
Advice
Towns and villages near Fulney
What else we do in Fulney
When a repair isn’t the answer
Honesty matters more than a booking, so here’s what a repair can’t fix:
- Damage hidden under a previous coating, until it’s stripped back
- Holes rusted through the metal
- An acrylic bath that flexes badly underfoot
Send us pictures and we will tell you honestly before you book.
Materials we repair
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
What your bath is made of matters
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Why repair rather than replace?
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Our bath re-enamelling starts from £350. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why Fulney clients choose us
- Fixed prices from your photos
- We will tell you if it’s not worth repairing
- Every repair guaranteed for a year
- We leave the room as we found it
Read our pricing or bath cost comparison.
Do you need bath re-enamelling in Fulney?
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. That’s the point where re-enamelling makes sense.
Send us a photo if you notice any of these:
- Enamel that is lost its shine and feels rough
- An old resurfacing that is failing
- Several chips and rust patches
- An outdated colour you’d like to change
What your quote should include
- What happens if they find more damage
- Whether the price is fixed and includes VAT
- Whether they match the colour on site
- Whether a trained technician does the job
Your questions about bath re-enamelling in Fulney
Will you leave a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Is there any odour?
There can be some smell while we work. It clears as the materials cure.
Do you need to take the bath out?
No, it stays where it is. We work on the bath in place, with the room protected and ventilated.
Which areas do you work in?
Everywhere in the UK, Fulney included. Travel is included in the price.
I rent my home. Can I book you?
Yes, though it’s best to check with your landlord first. Landlords are frequently glad to have it sorted.
Can you re-enamel a roll-top bath?
Yes. Inside and out.
Can you repair several things at once?
Yes, and it’s frequently cheaper. Send pictures of everything together and we’ll quote them together.
Do you come to Fulney?
Yes. We work across the UK and travel to Fulney and the rest of Lincolnshire. Send us pictures for a fixed quote, or call 0345 017 0787.
About our accreditations · Every repair comes with a one-year guarantee.
