Carmarthenshire · Wales
Bath Re-enamelling for Pwll homes
Our technicians come to Pwll for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- An old resurfacing that is failing
- Several chips and rust patches
Bath re-enamelling in Pwll, done in place
We do not move the bath, so the taps, tiles and plumbing are not touched. It normally takes one visit, and can be used again the next day. If you are dealing with worn patches where water runs and sits and chips and rust in more than one place, we can normally put it right.
All of our repairs are guaranteed for twelve months. If something goes wrong with the work, we come back.
- Where
- Pwll (SA15)
- County
- Carmarthenshire
- Cover
- One year on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Our work in Pwll
Pwll is about 2 miles west of Llanelli, in Carmarthenshire. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Pwll is one of 195 places in Carmarthenshire we cover.
Postcode districts we cover here: SA15. Streets in the area include Penllech, Tyle Catherine and Elgin Road. We also cover the places around Pwll: Achddu (2 miles west), Y Graig (2 miles west), Burry Port (2 miles west), Furnace (2 miles west) and Pembrey and Burry Port Town (3 miles west). Within a short drive, we also cover Carmarthen (13 miles north), Ammanford (12 miles north-east), Box (3 miles east), Capel (3 miles east), Betws (12 miles north-east) and Pen-y-fan (3 miles east).
Near you in Pwll
Around Pwll, we work in homes near Ysgol Gyfun y Strade, The Colliers Arms and Pwll C.P. Mixed School. The closest station to Pwll is Pembrey & Burry Port station, roughly 2 miles west of the centre. Other landmarks nearby include Parc Howard Museum (1.9 miles east) and Prince Philip Hospital (2.9 miles east). For a walk, there’s WWT Llanelli Wetland Centre and Pen Waun Twmpath.
Other services in Pwll
When to call us in Pwll
Enamel wears gradually. Years of cleaning, hard water and hot baths dull the surface, normally first under the taps and around the waste.
Common reasons people in Pwll contact us are:
- A coating lifting around the plughole
- Lots of chips and rust spots
- A dull, rough surface that will not come clean
- Staining under the taps and around the waste
What your quote should include
- Whether the colour is mixed to match
- If travel is included in the price
- How your room will be protected
- A fixed quote, and whether VAT is included
When we would advise against a repair
We would rather lose a job than do one that will not last, so these are the limits:
- Steel that has corroded right through
- Anything hidden under an old coating, until we remove it
- Plumbing leaks, which need a plumber
Send us pictures and we will tell you honestly.
Materials we work on in Pwll
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
- Acrylic baths
What we do, step by step
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the work takes most of the day, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
How to prepare
- Let us know if it has been repaired before
- Keep pets and children out of the room while we work
- Ensure the area is dry
Ask for a price
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Advice
How we price bath re-enamelling
Prices start from £350. We don’t charge extra for travel to Pwll. The price depends on:
- Where the damage is and how we get to it
- What kind of damage it is
- The material and finish
- Whether old repairs or coatings need taking off
The price reflects the work involved, not where you live. You’ll see the full price before you book.
Quotes from your pictures
Almost every job we do is priced from pictures. This is what we need:
- Your postcode, so we can check dates
- Something in shot to show the size
- A wider photo showing the entire bath
- One sharp close-up of the damage
To get a price, send two or three photos through our quote form or ring us. We will tell you honestly if a repair is the right fix.
Work for landlords and builders
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so we keep visits short and tidy. We’ll fit around changeovers where we can.
If you manage property in Pwll, we will quote for several properties at once. Send photos for each one and we will come back with a combined price.
Your questions about bath re-enamelling in Pwll
Do you cover Pwll?
Yes. We cover the whole UK and come to Pwll and the rest of Carmarthenshire. Send pictures and we’ll quote, or call 0345 017 0787.
Is there any odour?
Expect a mild smell while we’re working.
Will it make a mess?
No. The work area is masked and covered, and we leave the room clean.
What happens after I send pictures?
We look at the pictures and reply with a fixed price and some dates. If we need another angle, we will ask.
Will the new finish last?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
What does bath re-enamelling cost?
Resurfacing from £350. Every job gets a fixed quote from your photos. Send a close-up of the damage and a wider photo and your postcode.
How soon can you come?
It depends on the time of year and where you are. Send photos with your postcode and we’ll reply with the earliest dates.
Do you resurface freestanding baths?
Yes. Inside and out if you’d like.
Why repair rather than replace?
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Our bath re-enamelling starts from £350. We charge the same wherever you are, so there is no premium for Pwll. The job itself decides the price: how much damage, what it’s made of and how many items.
Why book with us
- Colour mixed on the day to match
- Fixed prices from your photos
- Repair technicians who travel to you, UK-wide
- Most jobs done in one visit
Read our prices page or resurfacing vs replacement cost guide.
Looking after it afterwards
Much of the damage we repair could have been avoided. A few tips:
- Don’t leave a chip unrepaired
- Rinse off hair dye, oils and bath bombs immediately
- Respect the curing time we give you
- Keep suction mats out of the bath
Use mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
Rust spots on a worn bath get worse with time and make the job bigger. Resurfacing before they spread keeps it simpler.
Materials and what they mean for the repair
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel often rusts by the plughole, so we pay close attention there.
About our accreditations · Every repair comes with a one-year guarantee.
