Aberdeenshire · Scotland
Bath re-enamelling & resurfacing in Fyvie, Aberdeenshire
Damaged bath in Fyvie? We repair it in place, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- Stains that will not shift
- Worn patches where water runs and sits
Bath re-enamelling at your home in Fyvie
Resurfacing renews the whole surface of the bath without a refit. It’s the answer when the entire bath is tired rather than one spot. We are often asked to fix an old resurfacing that’s failing and a dull, rough surface that won’t come clean, in pressed steel baths, basins & shower trays and acrylic baths.
All of our repairs are guaranteed for twelve months. If something goes wrong with the work, we come back.
- Where
- Fyvie (AB53)
- County
- Aberdeenshire
- Warranty
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Looking after it afterwards
So the finish stays in good condition:
- A dripping tap should be fixed promptly
- Do not leave bottles, razors or sponges standing on the surface
- Don’t leave a chip unrepaired
- Wipe the bath dry after use in hard water areas
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
Don’t try to scrub a worn bath back to shine. It just wears the enamel further.
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully, and give it the full curing time. If it fails, we can still put it right.
A DIY attempt is not a disaster. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
Where we work around Fyvie
Fyvie is about 10 miles north of Inverurie, in Aberdeenshire. Whether you are in the middle of Fyvie or on the outskirts, the service is the same: a fixed quote, a tidy visit and a guarantee. We cover 161 places in Aberdeenshire, from the larger towns to small villages.
Our repair technicians cover all of AB53 and the streets around it. Streets in the area include Main Street, School Road and Parnassus Gardens, and we cover them all. Close by, we cover St Katherines (2 miles south-east), Rothienorman (3 miles south-west), Meikle Wartle (5 miles south-west), Methlick (6 miles east) and Daviot (6 miles south). Further out, we also cover Inverurie (10 miles south), Ellon (13 miles east), Turriff (8 miles north), Huntly (15 miles west), Garioch (10 miles south) and Kemnay (14 miles south). Some remote addresses need extra planning, so it’s best to call first.
Around Fyvie
We visit homes around St Peter's Church, among other places. Further afield, we also cover the area around Gight Castle (3.8 miles east).
When a repair isn’t the answer
A repair isn’t right for every job, for example:
- A bath that’s rusted through
- A cast iron or steel bath that is cracked right through
- Problems we cannot see until an old finish comes off
Not sure? Send photos and we will give you a straight answer.
Materials we work on in Fyvie
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
How the visit works
On the day itself, there is little for you to do. Show us the job, point us to the room, and we will get on with it. The job generally runs to a full day, including clearing up.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Tell us about parking, stairs or access
- Move bottles, mats and clutter away from the area
- Open a window if you can
How to get a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. You’ll get a fixed price, not an estimate.
Advice
What your bath is made of matters
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Repair or replace: which is better?
A refit takes several trades and several days. Re-enamelling takes one technician and typically one day, and the bath can be used the day after. Prices start from £350. Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
What you get with us
- A year’s guarantee on all work
- Work done at your home or business
- Rooms protected and left tidy
- No need to remove anything
Take a look at our full price list and bath cost comparison.
Towns and villages near Fyvie
More services for Fyvie
What bath re-enamelling costs
Resurfacing from £350. We charge the same across the UK, including Fyvie. What changes the price is:
- Where the damage is and how we get to it
- How many areas need work
- Any earlier repairs that need removing first
- Whether we combine several jobs
Rather than charging by the hour, we price the entire job up front. It depends on the damage, the material and access.
How to get a fixed price
Photographing the damage takes a minute. Please include:
- A clear, close picture of the problem area
- Where you are, by postcode
- Any earlier repairs or coatings
- Something in shot to show the size
You don’t need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Fyvie questions
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as householders in Fyvie.
How quickly can you book me in?
We’ll give you dates with your quote. Tell us if you need it done quickly.
What information do you need?
A close-up, a wider photo and your postcode. Then we will agree a date.
Will the bath be moved?
Not at all. Everything is done in your bathroom, with the room masked and ventilated.
What if the damage is worse than the pictures show?
We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.
How long is the bath unusable?
Usually a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Do you resurface freestanding baths?
Yes. Inside and out if you’d like.
Will the new finish last?
Look after it and it lasts. Gentle cleaning, no suction mats.
When to call us in Fyvie
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
Keep an eye out for these signs:
- A bath that stays dull however much you clean it
- Thin, worn enamel in places
- A coloured bath you want in white
- A peeling or bubbling previous coating
Comparing quotes
- How long the guarantee is and what it covers
- When it can be used again
- Aftercare advice
- A fixed quote, and whether VAT is included
About our accreditations · Every repair comes with a one-year guarantee.
