Aberdeenshire · Scotland
Bath Repair for Fyvie homes
We travel to Fyvie for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.
- Repairs from £95
- A kit repair that didn’t last
- A hole punched through by something heavy
What happens on the day
Expect a friendly, tidy visit. We agree the arrival time in advance, cover and mask the work area, then carry out the work, which typically takes a morning or an afternoon. If we find something your pictures didn’t show, we will explain it before carrying on.
- First, we check the damage against your pictures and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Getting ready for the visit
- Clear toiletries, mats and anything else from around the area
- Have somewhere for us to park nearby if possible
- Let the surface dry out before the visit
Ask for a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed quote the same day in most cases.
Read more
About our bath repair in Fyvie
We see every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. Each is repaired in place. Typical jobs include damage done while the bathroom was being fitted and a failed DIY repair that’s discoloured or lifting, across whirlpool & spa baths, acrylic and cast iron enamel.
Every repair is covered by our one-year guarantee.
- Area
- Fyvie (AB53)
- Area hub
- Aberdeenshire
- Cover
- One year on every repair
- Price
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
How we price bath repair
Prices start from £95. There’s no area surcharge for Fyvie. What changes the price is:
- Where the damage is and how we get to it
- What the surface is made of
- Any earlier repairs that need removing first
- Unusual colours or finishes
No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Send photos for a quote
Photographing the damage takes a minute. Try to send:
- One picture of the entire bath
- Whether it’s been repaired or coated before
- Good light, ideally daylight, without flash glare
- A coin or ruler next to the damage for scale
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them to us. What comes back is a fixed price, not a guess.
Questions from Fyvie
Can you repair something that’s been repaired before?
Normally, yes. The old repair comes out first, so let us know about it.
Do you charge for travel?
There is no separate call-out charge. Your fixed price includes everything.
Something went through my bath. Can it be fixed?
Normally. Send us a picture of the hole and one from under the bath if you can.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can a cracked acrylic bath be fixed?
In most cases. We reinforce the crack from behind, then fill and refinish the front, so access behind the panel is important.
Can landlords book you?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across Aberdeenshire.
Can you do more than one item on the same visit?
Of course, and it typically saves money. Send pictures of everything together and you will get one combined price.
Do you work in Fyvie?
Yes. We cover the whole UK and travel to Fyvie. Send us photos for a fixed quote, or call 0345 017 0787.
What else we do in Fyvie
For landlords and businesses
We are used to working with agents and managing companies. Just send photos, the address and how to get access.
For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.
Common problems we fix in Fyvie
Dropped items cause the majority of chips, and a lot happen during bathroom refits. Acrylic baths crack for a different reason: poor support underneath, so the bath flexes when it’s full.
The things clients typically mention when they call include:
- Deep scratches in acrylic
- Snagging damage from a refit
- Chips under the taps
- Chips along the edge of the bath
Before booking anyone
- Whether the colour is mixed to match
- How changes to the job are handled
- How your room will be protected
- Whether the price covers travel
Keeping it looking good
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Rinse it down after each bath
- Get any new chip repaired before it rusts
- Keep abrasive pads and gritty cleaners away from the bath
- Cover the bath during DIY or decorating
For the first few days, keep heavy bottles off the repaired spot. After that, clean it as you would the rest of the bath without abrasive products.
A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.
Should I try a DIY kit first?
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
Honest limits
Some jobs are not right for a repair, for example:
- Acrylic cracks with no access behind them
- Flexing caused by a failed cradle or loose feet
- Metal that has corroded all the way through
Not sure? Send photos and we’ll give you a straight answer before booking.
Surfaces we repair
- Pressed steel enamel
- Whirlpool & spa baths
- Cast iron enamel
- Roll-top & freestanding
- Acrylic
Why repair rather than replace?
Replacing a fitted bath normally involves a plumber, removing the old bath, re-tiling and a new panel and getting rid of the old bath. Repairing it fixes just the damaged area in one visit. Our bath repair starts from £95. We charge the same wherever you are, with no extra for Fyvie. The job itself decides the price: how much damage, what it’s made of and how many items.
Why us?
- One-year guarantee on every repair
- Same prices wherever you are
- Everything repaired in place
- Colour mixed on the day to match
See our prices page and bath cost comparison.
Our work in Fyvie
Fyvie is about 10 miles north of Inverurie, in Aberdeenshire. From the centre of Fyvie to the outlying streets, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. Our repair technicians cover 161 places in Aberdeenshire, from the larger towns to small villages.
Jobs in AB53 work the same way as everywhere else we cover. Whether you live on Main Street, School Road and Parnassus Gardens or a nearby road, we can come to you. If you are just outside Fyvie, we cover St Katherines (2 miles south-east), Rothienorman (3 miles south-west), Meikle Wartle (5 miles south-west), Methlick (6 miles east) and Daviot (6 miles south). We also work in nearby towns such as Inverurie (10 miles south), Ellon (13 miles east), Turriff (8 miles north), Huntly (15 miles west), Garioch (10 miles south) and Kemnay (14 miles south). For island and remote addresses, call first so we can plan the visit.
Around Fyvie
In Fyvie, that means homes near St Peter's Church and the streets around them. Well-known places in the area include Gight Castle (3.8 miles east).
About our accreditations · Every repair comes with a one-year guarantee.
