Lincolnshire · England
Bath re-enamelling & resurfacing in Gedney Broadgate, Lincolnshire
Bath re-enamelling for Gedney Broadgate, without a refit. Get a fixed price from your photos, then book a visit.
- Resurfacing from £350
- A dull, rough surface that won’t come clean
- A peeling or bubbling previous coating
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.
Bath re-enamelling in Gedney Broadgate without replacing anything
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, so we do not cut corners on it. We are frequently asked to fix staining under the taps and around the waste and an outdated colour you’d like to change, on basins & shower trays, pressed steel baths and cast iron baths.
The work is covered for a year after we finish. Just call us if there is a problem and we will come back.
- Where
- Gedney Broadgate (PE12)
- Region
- Lincolnshire
- Warranty
- One year on every repair
- Price
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Also near Gedney Broadgate
What else we do in Gedney Broadgate
Aftercare tips
It’s all simple stuff, just a few sensible habits:
- A dripping tap should be fixed promptly
- Store bottles off the bath
- Keep suction mats out of the bath
- Leave the bath for the full curing time before using it
The first few days matter most: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Gedney Broadgate: your questions answered
Can you re-enamel a roll-top bath?
Yes, frequently. The inside is resurfaced, and we can refinish the outside as well.
Do you charge for travel?
We don’t add a call-out fee. Your fixed quote includes everything.
Which areas do you work in?
Across the UK, so Gedney Broadgate is covered. Our prices are the same everywhere.
What happens after I send photos?
We come back with a fixed price, plus dates. There is no obligation to book.
What do you need from me?
Photos of the damage, a photo of the whole bath and your postcode. Then we will agree a date.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
How do I get a price for bath re-enamelling in Gedney Broadgate?
Prices start from £350. The exact price depends on the damage, so we quote from photos. You will get a fixed figure before booking.
Is repairing better than replacing?
Typically, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.
Honest limits
In fairness, some problems need a different fix:
- Holes rusted through the metal
- Anything hidden under an old coating, until we remove it
- Leaking taps or wastes (a plumber’s job)
Not sure? Send pictures and we will give you a straight answer.
Surfaces we repair
- Acrylic baths
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
How we price bath re-enamelling
Prices start from £350. Prices are worked out job by job, from your photos. What matters most is:
- Access to the area
- Whether it’s a chip, crack, burn or wear
- How many items we do on one visit
- How hard the colour is to match
Our prices are the same across the UK, so there’s no premium for Gedney Broadgate. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Send pictures for a quote
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- Good light, ideally daylight, without flash glare
- A coin beside the damage so we can judge size
- What it’s made of, if you know
- Details of any past repairs
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them to us. What comes back is a fixed quote, not a guess.
Materials and what they mean for the repair
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
How it works
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take a full day. We clean up when we’re done and tell you when it’s ready to use.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
Before we arrive
- Plan for the room to be out of bounds to pets and children
- Avoid using the area for a few hours before we arrive
- Mention any earlier repairs or resurfacing
Get a quote
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job.
Related advice
When to call us in Gedney Broadgate
Previous coatings can fail too, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
People generally call us after spotting something like this:
- A coating lifting around the plughole
- Chips and rust in more than one place
- A bath in a colour that no longer suits
- Enamel that’s lost its shine and feels rough
Comparing quotes
- Whether they match the colour on site
- What aftercare is recommended
- What happens if they find more damage
- Whether there are any call-out or travel charges
Why repair rather than replace?
Getting a cast iron bath out is hard work: they’re heavy, frequently need breaking up, and a new one isn’t cheap. Re-enamelling avoids all of it. Prices start from £350. A repair normally costs much less than people expect, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.
What you get with us
- CHAS, Constructionline and SafeContractor accredited
- One price list for the entire UK
- Honest advice, even when it means no job
- One-year guarantee on every repair
See our pricing and resurfacing vs replacement cost guide.
Covering Gedney Broadgate
Gedney Broadgate is about 9 miles north-west of Wisbech, in Lincolnshire. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Gedney Broadgate is one of 732 places in Lincolnshire where we work.
Our repair technicians cover all of PE12 and the streets around it. Streets in the area include Harford Gate, Huntsgate and Bullock's Short Gate, and we cover them all. Close by, we cover Gedney (1 mile north), Chapelgate (1 mile north), Fleet (2 miles north-west), Sutton St James (3 miles south) and Holbeach Fen (3 miles west). Larger places within reach include Boston (14 miles north), Spalding (10 miles west), Holbeach (3 miles north-west), Pinchbeck (10 miles west), Witham (15 miles north) and Crowland (13 miles south-west).
Around Gedney Broadgate
Typical jobs here are in homes near University Academy Long Sutton, among other places. Other landmarks nearby include Fleet Motte (1.2 miles north-west).
About our accreditations · Every repair comes with a one-year guarantee.
