Gwynedd · Wales
Bath Re-enamelling for Gellilydan homes
Full bath re-enamelling and resurfacing in Gellilydan, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Stains that won’t shift
- A peeling or bubbling previous coating
The process
The work is clean and fairly quiet, so you can stay at home while we’re there. Protection goes down first, then the work takes most of the day. At the end we talk you through the curing time and the aftercare.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s usually ready the day after.
How to prepare
- Mention if the room is upstairs or in a flat
- Avoid using the area for a few hours before we arrive
- Have a window or extractor fan available
How to get a price
You don’t need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Advice
How we handle bath re-enamelling in Gellilydan
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. We work on acrylic baths, Victorian roll-tops and basins & shower trays, and people most frequently call us about an outdated colour you’d like to change and a coating lifting around the plughole.
We guarantee the work for a year. If there’s a problem with the repair within the year, we return and sort it.
- Where
- Gellilydan (LL41)
- County
- Gwynedd
- Cover
- A year, on every repair
- Price
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Repair or replace: which is better?
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Our bath re-enamelling starts from £350. Instead of hourly rates, we price the entire job up front. Damage, material and access decide it.
What you get with us
- Rooms protected and left tidy
- Repair technicians who travel to you, UK-wide
- Fixed prices from your photos
- One visit for most repairs
Take a look at our prices page or bath cost comparison.
Keeping it looking good
How the surface is treated afterwards matters. Here’s what we suggest:
- Don’t leave a chip unrepaired
- Rinse off hair dye, oils and bath bombs right away
- Don’t leave bottles, razors or sponges standing on the surface
- Avoid suction-cup mats
Use mild, non-abrasive cleaners, don’t use suction bath mats, and don’t leave bottles or razors standing on the surface.
On a worn bath, rust spots keep spreading and make the job bigger. Resurfacing before they spread keeps it simpler.
Repairs by material
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is what we repair.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we check it carefully.
How we price bath re-enamelling
Resurfacing from £350. We give every job a fixed price from pictures. This is what makes a difference:
- What the surface is made of
- Access to the area
- How many areas need work
- Unusual colours or finishes
We don’t add extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Getting a price from pictures
When you take your photos, these tips help us give you a firm price:
- The postcode, so we can plan the visit
- The material, if you know it
- A wider photo showing the whole bath
- A coin or ruler next to the damage for scale
A quote takes minutes to ask for: photograph the damage, then the whole bath, include your postcode and send them over. What comes back is a fixed quote, not a guess.
Towns and villages near Gellilydan
Other services in Gellilydan
Can I fix it myself?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Landlord and trade work in Gellilydan
Letting agents often send us photos straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.
Questions from Gellilydan
Is it OK to have pets in the house?
Yes, as long as they stay out of the room we’re working in. We’ll tell you when the room can be used again.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as householders across Gwynedd.
What does bath re-enamelling cost?
Prices start from £350. We give a fixed price based on pictures of the damage. Send a close-up of the damage and a wider photo and your postcode.
Is there any odour?
There may be a mild smell during the work.
How soon can you come?
We will give you dates with your quote. Tell us if you need it done quickly.
I rent my home. Can I book you?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
Do you work in Gellilydan?
Yes. We cover the entire UK and come to Gellilydan. Send us photos for a fixed quote, or call 0345 017 0787.
Is there a guarantee?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
Honest limits
In fairness, there are a few things a repair will not fix:
- Plumbing leaks, which need a plumber
- A cast iron or steel bath that’s cracked right through
- Holes rusted through the metal
Not sure? Send photos and we will give you a straight answer before booking.
Materials we repair
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
About Gellilydan
Gellilydan is about 21 miles south of Bangor, in Gwynedd. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Gellilydan is one of 165 places in Gwynedd where we work. Our jobs stretch from Gellilydan to Liverpool (54 miles away).
Jobs in LL41 are booked in the same way as anywhere else. Neighbouring places we cover include Maentwrog (1 mile west), Tan-y-Bwlch (2 miles west), Llan Ffestiniog (2 miles north-east), Trawsfynydd (3 miles south-east) and Congl-y-wal (3 miles north). Larger places within reach include Dolgellau (14 miles south), Porthmadog (7 miles west), Y Bala (15 miles east), Barmouth (15 miles south), Blaenau Ffestiniog (4 miles north) and Llanberis (14 miles north-west).
Local landmarks in Gellilydan
In Gellilydan, that means homes near Bryn Arms and Holy Cross Church and the streets around them. For rail, the closest station is Blaenau Ffestiniog station, roughly 4 miles north of the centre. Other landmarks nearby include Ffestiniog Memorial Hospital (3.8 miles north) and Yr Ysgwrn (3.9 miles south-east). For a walk, there’s Garth-gwyn and Llyn yr Oerfel.
About our accreditations · Every repair comes with a one-year guarantee.
