Gwynedd · Wales
Bath Re-enamelling in Barmouth
Bath re-enamelling in Barmouth without the cost of replacing. Send us photos for a fixed quote, then we come to you.
- Resurfacing from £350
- Chips and rust in more than one place
- Thin, worn enamel in places
How we handle bath re-enamelling in Barmouth
Many of the baths we re-enamel are period roll-tops, which are heavy, hard to move and costly to replace. Resurfacing them in place keeps the original bath. If you’re dealing with a roll-top that’s seen better days and a bath that stays dull however much you clean it, we can usually put it right, whatever the material.
All our work is covered by our one-year guarantee, wherever you are in Gwynedd.
- Where
- Barmouth (LL42)
- Area hub
- Gwynedd
- Cover
- A year, on every repair
- Quote
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
When a repair isn’t the answer
In fairness, some problems need a different fix:
- Damage hidden under a previous coating, until it’s stripped back
- Plumbing leaks, which need a plumber
- Acrylic that moves when you stand in it
If in doubt, send pictures and we will say what we think.
Surfaces we repair
- Cast iron baths
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
Towns and villages near Barmouth
What else we do in Barmouth
What your bath is made of matters
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel frequently rusts by the plughole, so we check it carefully.
Questions from Barmouth
How long is the bath unusable?
One day for most baths and can be used the day after. We will confirm timings when we quote.
Which areas do you work in?
Everywhere in the UK, Barmouth included. There’s no extra charge for travel.
Can you repair something that is been repaired before?
Generally, yes. Tell us what was done before.
When can you do it?
That depends on our diary for your area. We will offer you dates when we send your quote.
How much does bath re-enamelling cost in Barmouth?
Resurfacing from £350. Because every job differs, we price from photos. You know the full cost before anything is booked.
Is a repair better than a new one?
Generally, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
Can you make a coloured bath white?
Yes, most people go for white. Mention the colour you want when you send pictures.
Does re-enamelling smell?
Some odour is normal while we spray, which is why we ventilate the bathroom. It clears as the finish cures.
Work for landlords and builders
Builders use us to fix snagging damage before handover. Several plots can be done in one visit.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
Prices and what affects them
Resurfacing from £350. We give every job a fixed quote from pictures. These are the things that affect it:
- Access to the area
- How hard the colour is to match
- What the surface is made of
- How many areas need work
No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Send pictures for a quote
Most quotes are done from pictures alone. To make it quick:
- Daylight if possible, and no flash reflection
- A coin or ruler next to the damage for scale
- A wider photo showing the whole bath
- A close-up of the damage, in focus
Most clients in Barmouth get their price from photos. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
About Barmouth
Barmouth (Welsh: Abermaw) is about 34 miles north-west of Y Drenewydd, in Gwynedd. We visit clients in Barmouth and the surrounding area, so nothing has to leave your home. Barmouth is one of 165 places in Gwynedd we cover. Our nearest city page is Liverpool, about 67 miles away.
We cover every part of LL42. Local streets include Station Road, Park Road and Marine Road. Barmouth sits on or near the A496, which makes travel easy. Nearby, we also work in Llanaber (1 mile north-west), Tal-y-bont (4 miles north), Llanddwywe-is-y-graig (4 miles north), Llanddwywe (4 miles north) and Dyffryn Ardudwy (5 miles north). Further out, we also cover Tywyn (10 miles south), Dolgellau (7 miles east), Porthmadog (14 miles north), Pen-dre (9 miles south), Criccieth (15 miles north-west) and Aberdovey (12 miles south).
What’s near Barmouth
Locally, our jobs take us to homes close to St Tudwal's Church and Royal Hotel. There’s a railway station in Barmouth itself: Barmouth station. Well-known places in the area include Barmouth Rnli Museum (under half a mile south-east). Not far away are Garn and Llynnau Cregennen.
What happens on the day
Here’s how a visit typically runs: we arrive on time, sheet and mask the area around the job, carry out the work and tidy away. Allow the best part of a day from start to finish. Before we go, we will explain how long to leave it and how to care for it.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Ensure the room can be ventilated
- Let us know about parking or access
- Let the surface dry out before the visit
Getting a price
Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you’ll get a fixed price back. Quotes are free and you’re under no obligation.
Read more
Repair or replace in Barmouth?
If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Nothing else is disturbed. Resurfacing from £350, with every job priced individually. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.
What you get with us
- Nothing taken out or refitted
- Dust sheets down, tidy finish
- A year’s guarantee on all work
- A fixed quote before you book
Take a look at our full price list and guide to resurfacing and replacement costs.
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.
Signs you need bath re-enamelling in Barmouth
Often the bath has just had decades of use, with nothing wrong except the surface. Underneath, a cast iron or steel bath is generally as strong as ever.
If you can see any of these, send us a picture:
- A dull, rough surface that won’t come clean
- An original cast iron bath that needs restoring
- An outdated colour you’d like to change
- Staining under the taps and around the waste
What to look for in a quote
- Whether they match the colour on site
- How long the guarantee is and what it covers
- A fixed price, and whether VAT is included
- How the room is protected while they work
About our accreditations · Every repair comes with a one-year guarantee.
