Neath Port Talbot · Wales
Bath Re-enamelling for Gellinudd homes
Bath re-enamelling for Gellinudd, without a refit. Send us pictures for a fixed price, then we come to you.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Thin, worn enamel in places
For landlords and businesses
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip.
How we handle bath re-enamelling in Gellinudd
Resurfacing renews the entire surface of the bath without a refit. It suits baths that are dull, stained, rough or chipped all over. Common call-outs are for an old resurfacing that’s failing and an original cast iron bath that needs restoring, in basins & shower trays, cast iron baths and Victorian roll-tops.
The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.
- Area
- Gellinudd (SA8)
- Region
- Neath Port Talbot
- Warranty
- A year, on every repair
- Quote
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Gellinudd and nearby
Gellinudd is about 4 miles north of Neath, in Neath Port Talbot. Clients in Gellinudd get the same service as everywhere else we cover: a fixed quote from pictures, then a visit to do the work. Gellinudd is one of 100 towns and villages in Neath Port Talbot where we work.
We cover every part of the SA8 postcode area and the streets around it. From Lon Catwg, Gelligeiros and Graig Road or anywhere nearby, a technician can come to you. We also travel to Rhos (1 mile south), Cilybebyll (1 mile north-east), Craig Llangiwg (1 mile north-west), Alltwen (1 mile south-west) and Ynysmeudwy (1 mile north). Further out, we also cover Neath (4 miles south), Port Talbot (9 miles south), Sandfields (9 miles south), Mount Pleasant (5 miles south), Baglan Moors (8 miles south) and Sandfields West (9 miles south).
Near you in Gellinudd
Our customers here include homes close to Cwmtawe Community School, Rhos Primary School and St Peter's Church. You will also find Rhos Inn (0.7 miles south) and Cwmtawe Community School (1.1 miles west). The closest station to Gellinudd is Neath station, roughly 4.2 miles south of the centre. Nearby you’ll also find Gellinudd Hospital (under half a mile north) and Mound (2.5 miles south). The countryside around Gellinudd includes Pen Alltwen and Gnoll Estate Country Park lake 1.
Prices and what affects them
Resurfacing from £350. Each job gets its own fixed quote. This is what makes a difference:
- Previous DIY repairs that have to come out
- How much damage there is
- The colour and finish to match
- How many items we do on one visit
Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access.
Getting a price from pictures
We price nearly every job from photos. This is what to send:
- Where you are, by postcode
- A coin beside the damage so we can judge size
- What it’s made of, if you know
- Natural light rather than flash
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire bath, we can price the job.
Towns and villages near Gellinudd
What else we do in Gellinudd
The process
We begin by going over the job with you. After that, protection goes down around the work area and we start. You can expect it to take most of the day, and we’ll keep you posted as we go.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s normally ready the day after.
Getting ready for the visit
- Clear the area around the damage
- Have a window or extractor fan available
- Mention any earlier repairs or resurfacing
Getting a price
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.
Related advice
Repair or replace: which is better?
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Prices start from £350. A repair normally costs much less than people expect, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.
Why book with us
- Honest advice, even when it means no job
- One price list for the whole UK
- Colours mixed by hand to suit your surface
- Most jobs done in one visit
See our pricing and resurfacing vs replacement cost guide.
Your questions about bath re-enamelling in Gellinudd
How do I book?
Just pictures, your postcode and a contact number. On the day, access to the room.
How quickly can you book me in?
That depends on our diary for your area. We will offer you dates when we send your quote.
Can you resurface a pink bath in white?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
Is there a call-out fee?
We do not add a call-out fee. Your fixed price includes everything.
Do you cover the entire of Neath Port Talbot?
Across the UK, so Gellinudd is covered. Prices do not change with location.
Is there any odour?
Some materials have a smell while they’re applied, which is why we ventilate. It clears as the materials cure.
Can you fix a peeling bath coating?
In most cases. We strip the failing coating and resurface it properly. Mention it when you send photos.
How do I get a price for bath re-enamelling in Gellinudd?
Resurfacing from £350. Every job gets a fixed price from your photos. Send a close-up of the damage and a wider photo and your postcode.
How to care for the repair
To keep it looking its best:
- Have chips seen to early
- Stick to gentle, non-abrasive cleaners
- A dripping tap should be fixed promptly
- Wipe the bath dry after use in hard water areas
Dry the bath after use if possible, particularly with hard water, and rinse away any product left on the surface.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Can I fix it myself?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.
When to call us in Gellinudd
Many baths we resurface have simply been well used, and only the surface is worn. The body of the bath is normally perfectly sound.
You may need us if you’ve spotted any of these:
- Worn patches where water runs and sits
- A bath that stays dull however much you clean it
- A bath in a colour that no longer suits
- A peeling or bubbling previous coating
What your quote should include
- How your room will be protected
- Whether the price is fixed and includes VAT
- What aftercare is recommended
- The length of the guarantee and what it covers
Different materials, different repairs
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we pay close attention there.
About our accreditations · Every repair comes with a one-year guarantee.
