Neath Port Talbot · Wales
Bath Re-enamelling in Ynysmeudwy
Full bath re-enamelling and resurfacing for homes and businesses in Ynysmeudwy and across Neath Port Talbot. Send photos for a free, fixed quote.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- An outdated colour you’d like to change
Work for landlords and builders
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which matters when someone is living in the home.
How we handle bath re-enamelling in Ynysmeudwy
We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. Common call-outs are for thin, worn enamel in places and stains that won’t shift, across acrylic baths, basins & shower trays and pressed steel baths.
We stand behind the work with a one-year guarantee, so you’re not left on your own once we’ve gone.
- Location
- Ynysmeudwy (SA8)
- Area hub
- Neath Port Talbot
- Cover
- One year on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Covering Ynysmeudwy
Ynysmeudwy is about 5 miles north of Neath, in Neath Port Talbot. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We work in 100 places in Neath Port Talbot, from the larger towns to small villages.
All of SA8 is within our area, from the main roads to the quietest streets. Jobs here include addresses on New Road, Old Road and Bethesda Road. We also travel to Craig Llangiwg (1 mile south-west), Llan-giwg (1 mile west), Cilmaengwyn (1 mile north-east), Cilybebyll (1 mile south-east) and Gellinudd (1 mile south). Within a short drive, we also cover Neath (5 miles south), Port Talbot (10 miles south), Sandfields (10 miles south), Mount Pleasant (6 miles south), Baglan Moors (9 miles south) and Sandfields West (9 miles south).
Near you in Ynysmeudwy
Our customers here include homes close to Church of Saint Ciwg, Llangiwg Primary School and Ynysmeudwy Arms, among other places. Well-known places in the area include Gellinudd Hospital (0.8 miles south) and Cae Castell (2.5 miles west). For a walk, there is Cefnllan and Cwm Clydach RSPB Reserve.
Honest limits
We will always be straight with you, so here’s what a repair can’t fix:
- A bath that’s rusted through
- A poorly supported acrylic bath, until it’s firmed up
- Plumbing leaks, which need a plumber
Send us pictures and we’ll tell you honestly.
Surfaces we repair
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
How it works
Visits start with a quick look at the job together, so you know exactly what we are doing. After that, protection goes down around the work area and the work begins. It normally takes most of the day, and we’ll tell you if anything changes.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can typically be used the following day.
Getting ready for the visit
- Clear toiletries, mats and anything else from around the area
- Let us know about parking or access
- Mention any earlier repairs or resurfacing
Getting a price
You don’t need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Read more
Signs you need bath re-enamelling in Ynysmeudwy
Previous coatings can fail too, peeling around the waste or bubbling. We strip what’s failing and start again.
Customers typically contact us about:
- A bath that stays dull however much you clean it
- A roll-top that is seen better days
- An outdated colour you’d like to change
- Staining under the taps and around the waste
Before you book anyone
- What happens if the damage is worse than the pictures show
- What the guarantee covers, and for how long
- Whether the price covers travel
- How the room is protected while they work
What bath re-enamelling costs
Prices start from £350. You will know the full cost before you book. We look at:
- Whether old repairs or coatings need taking off
- What kind of damage it is
- The material and finish
- The size and number of damaged areas
We charge the same wherever you are, with no extra for Ynysmeudwy. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Getting a price from pictures
Photographing the damage takes a minute, and it saves a visit. Try to send:
- Details of any past repairs
- The postcode, so we can plan the visit
- Natural light rather than flash
- A wider photo showing the entire bath
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, add your postcode and send them to us. You’ll get a fixed quote, not an estimate.
Common questions in Ynysmeudwy
Is there a smell?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
What areas do you cover?
The whole UK, including all of Neath Port Talbot. Just include your postcode and we’ll confirm dates.
Does someone need to be in?
We need someone to let us in. After that, you can carry on with your day.
How long is the bath unusable?
Usually a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Can I get a quote without a visit?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
It’s been repaired before. Can you still fix it?
Normally, yes. The old repair comes out first, so mention it when you send pictures.
Is a repair better than a new one?
Generally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.
Different materials, different repairs
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Towns and villages near Ynysmeudwy
Also in Ynysmeudwy
Can I fix it myself?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
How to look after the repair
Looking after the surface is easy:
- Store bottles off the bath
- Use washing-up liquid and a soft cloth
- Have chips seen to early
- Never use suction bath mats
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Fix dripping taps quickly.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
About our accreditations · Every repair comes with a one-year guarantee.
