Slough · England
Bath re-enamelling & resurfacing in Wexham Street, Slough
Problem with your bath in Wexham Street? We put it right where it is, match it on site and guarantee the work for a year.
- Resurfacing from £350
- A bath in a colour that no longer suits
- A roll-top that is seen better days
About our bath re-enamelling in Wexham Street
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. There’s no removal, plumbing or tiling involved. We regularly repair Victorian roll-tops, cast iron baths and acrylic baths, and people most frequently call us about a bath that stays dull however much you clean it and worn patches where water runs and sits.
You are covered after we leave: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Where
- Wexham Street (SL2, SL3)
- Region
- Slough
- Warranty
- 12 months on all our work
- Quote
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
The process
We agree an arrival time beforehand. On site, it takes most of the day. The room is left tidy and you’ll know when it can be used.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Mention any parking restrictions or tricky access
- Mention any earlier repairs or resurfacing
- Keep a parking space free if you can
Ask for a price
Most clients in Wexham Street get their price from pictures. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Related advice
Repair or replace: which is better?
Replacing a bath can take several days across several trades. Resurfacing takes one technician and generally a day, with the bath back in use the day after. Resurfacing from £350, with every job priced individually. We charge the same wherever you are, so there is no premium for Wexham Street. The job itself decides the price: how much damage, what it’s made of and how many items.
What you get with us
- We will tell you if it’s not worth repairing
- We come to you, anywhere in the UK
- CHAS and Constructionline accredited
- Fixed prices from your photos
See our pricing and resurfacing vs replacement cost guide.
FAQs for Wexham Street
How do I book?
A close-up, a wider photo and your postcode. Then we’ll agree a date.
Can you fix a peeling bath coating?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Do you hold any accreditations?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Will there be a smell?
A little, depending on the job. Ventilation keeps it to a minimum, and it soon fades.
How long does re-enamelling take?
Usually a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
When can you do it?
We’ll give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
Will the new finish last?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
Are there extra charges for Wexham Street?
There’s no separate call-out charge. Your fixed quote includes everything.
How we price bath re-enamelling
Prices start from £350. There’s no area surcharge for Wexham Street. The price reflects:
- How many items we do on one visit
- How many areas need work
- Any earlier repairs that need removing first
- The material and finish
There are no surprise extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Quotes from your pictures
Good photos mean an accurate price. Here’s what we find most useful:
- A wider photo showing the entire bath
- Good light, ideally daylight, without flash glare
- Where you are, by postcode
- What it’s made of, if you know
The quickest way to a price is to send a couple of photos through our quote form or call us. We will tell you honestly whether it can be repaired.
When to call us in Wexham Street
Older baths frequently have several problems at once: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
Signs it’s time to call us include:
- Enamel that’s lost its shine and feels rough
- Staining under the taps and around the waste
- Worn patches where water runs and sits
- A bath in a colour that no longer suits
Questions to ask before booking
- What prep work is covered
- How long it needs to cure
- Whether the price covers travel
- How your room will be protected
Where we work around Wexham Street
Wexham Street is about 2 miles north-east of Slough, in Slough. From the centre of Wexham Street to the outlying streets, the service is the same: a fixed price, a tidy visit and a guarantee. We work in 31 places in Slough. You can also see our page for London, about 21 miles away.
Our visits in SL2 and SL3 work the same way as everywhere else we cover. That includes homes on Larkings Lane, Hartley Close and Tubwell Road and the roads around them. We also cover the places around Wexham Street: Stoke Poges (1 mile west), Wexham Court (1 mile south), Fulmer (1 mile north-east), George Green (2 miles south-east) and Iver Heath (2 miles east). Larger places within reach include Cippenham (3 miles south-west), Chalvey (3 miles south-west), Langley (3 miles south), Upton (3 miles south), Burnham (4 miles west) and Datchet (4 miles south).
Landmarks near Wexham Street
In Wexham Street, that means homes near Khalsa Secondary Academy, The Plough Public House and The Stoke Poges School and the streets around them. For rail, the closest station is Slough station, roughly 2.3 miles south of the centre. Other landmarks nearby include Municipal Borough of Slough (2.5 miles south) and British Airways Heritage Collection (3.7 miles east). For a walk, there is Stoke Common.
Nearby places to Wexham Street
More services for Wexham Street
When we’d advise against a repair
We’d rather lose a job than do one that won’t last, so here’s what a repair cannot put right:
- A bath split right through the body
- Plumbing leaks, which need a plumber
- A poorly supported acrylic bath, until it’s firmed up
Not sure? Send pictures and we will give you a straight answer.
Surfaces we repair
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
Repairs by material
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Work for landlords and builders
Builders use us to fix snagging damage before handover. Several plots can be done in one visit.
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
How to look after the repair
So the finish stays in good condition:
- A quick wipe after use keeps limescale away
- A dripping tap should be fixed promptly
- Get any chip repaired quickly
- Keep suction mats out of the bath
A quick rinse and wipe after use helps, especially in hard water areas, to stop limescale building up.
If a previous coating is starting to peel, do not pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.
About our accreditations · Every repair comes with a one-year guarantee.
