Buckinghamshire · England
Bath re-enamelling & resurfacing in Iver Heath, Buckinghamshire
Damaged bath in Iver Heath? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Staining under the taps and around the waste
Bath re-enamelling at your home in Iver Heath
Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. We work on pressed steel baths, basins & shower trays and acrylic baths, and the jobs we see most are several chips and rust patches and enamel that’s lost its shine and feels rough.
Whatever the size of the job, you get the same one-year guarantee.
- Where
- Iver Heath (SL0)
- Area hub
- Buckinghamshire
- Warranty
- One year on every repair
- Price
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
How the visit works
You don’t need to empty the room beforehand. Everything we use comes in the van with us, put protection down and get going once we’ve agreed what we’re doing. It normally takes most of the day, and you are welcome to carry on with your day while we work.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- Once cured, normally by the day after, the bath is ready.
Preparing for the visit
- Point us to the nearest place to park
- Tell us about parking, stairs or access
- Tell us if there are stairs or a lift
Get a quote
You do not need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Related advice
Should I try a DIY kit first?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
Honest limits
A repair is not right for every job, for example:
- Plumbing leaks, which need a plumber
- Problems we can’t see until an old finish comes off
- An acrylic bath that flexes badly underfoot
Send us photos and we will tell you honestly before booking.
Materials we repair
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Acrylic baths
Covering Iver Heath
Iver Heath is about 3 miles west of Hillingdon, in Buckinghamshire. From the centre of Iver Heath to the outlying streets, the service is the same: a fixed quote, a tidy visit and a guarantee. Iver Heath is one of 263 places in Buckinghamshire we cover. You can also see our page for London, about 19 miles away.
All of SL0 is within our area, from the main roads to the quietest streets. From Church Road, Alder Road and Rowan Gardens or anywhere nearby, we can come to you. Other places close to Iver Heath include Iver (1 mile south-east), Shreding Green (1 mile south), Rush Green (2 miles north), George Green (2 miles south-west) and Wexham Street (2 miles west). Larger places within reach include High Wycombe (12 miles north-west), Chesham (13 miles north), Marlow (11 miles west), Amersham (10 miles north), Beaconsfield (7 miles north-west) and Chalfont St Peter (5 miles north).
Near you in Iver Heath
Typical jobs here are in homes near Church of St Margaret, The Black Horse pub and West Middlesex College and the streets around them. Nearby too are Uxbridge High School (2.1 miles east) and Iver Heath Infant School and Nursery (less than half a mile south-east). For rail, the closest station is Iver station, about 2.1 miles south. Other landmarks nearby include Wexham Park Hospital (2.3 miles west) and British Airways Heritage Collection (1.5 miles east). Green spaces nearby include Horse Shoe Bay and Kingcup Meadows and Oldhouse Wood.
How to look after the repair
Once the work has cured, treat it gently:
- Don’t leave bottles, razors or sponges standing on the surface
- Fix dripping taps quickly
- Dry the bath after use to stop limescale
- Stick to gentle, non-abrasive cleaners
A quick rinse and wipe after use helps, especially in hard water areas, so limescale cannot build up.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Do you need bath re-enamelling in Iver Heath?
Enamel wears gradually. Years of cleaning, hard water and hot baths dull the surface, starting where water runs and sits.
Look out for these signs:
- An old resurfacing that is failing
- Stains that won’t shift
- A dull, rough surface that will not come clean
- Chips and rust in more than one place
Questions to ask before booking
- How long it needs to cure
- Whether the price covers travel
- Whether cleaning and preparation are in the price
- What aftercare is recommended
Common questions in Iver Heath
How long is the bath unusable?
Usually a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
What information do you need?
Photos of the damage, a picture of the entire bath and your postcode. After that, we just agree a date.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
How do I get a price for bath re-enamelling in Iver Heath?
Prices start from £350. The exact price depends on the damage, so we quote from pictures. You will get a fixed figure before booking.
Do you cover Iver Heath?
We do. We send a technician to Iver Heath for every job, with no extra charge for travel.
Is my repair covered?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
Can a failed resurfacing be redone?
Yes. Removing the old finish takes extra time, which we include in the price.
Is there a call-out fee?
We do not add a call-out fee. Your fixed price includes everything.
Work for landlords and builders
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
Places near Iver Heath
What else we do in Iver Heath
Should you replace it?
A new bath means a plumber, lifting out the old bath, re-tiling or making good the walls and several days without a working bathroom. Re-enamelling renews the whole surface without moving it. Resurfacing from £350, with every job priced individually. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why choose Surface Doctor in Iver Heath
- No extra charge for your area
- Colour-matched on site
- A fixed quote before you book
- Generally one visit, start to finish
Read our full price list or bath cost comparison.
Repairs by material
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
About our accreditations · Every repair comes with a one-year guarantee.
