North Yorkshire · England

Bath Re-enamelling for Gillamoor homes

Full bath re-enamelling and resurfacing in Gillamoor, carried out at your home and guaranteed for a year.

  • Resurfacing from £350
  • A period or roll-top bath worth keeping
  • A coloured bath you want in white
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath re-enamelling in Gillamoor

How it works

Nothing needs to be moved out of the room. We bring everything we need with us, lay protective sheets and get going once we have agreed what we’re doing. Most jobs take a full day, and you can get on with other things while we are there.

  1. We check the bath and agree the finish with you.
  2. Everything around the bath is masked and covered.
  3. The bath is degreased, repaired and keyed.
  4. We apply the primer and then the finish coats.
  5. The masking comes off, we tidy up and tell you when it can be used.

Preparing for the visit

  • Have somewhere for us to park nearby if possible
  • Clear the area around the damage
  • Mention any parking restrictions or tricky access

Getting a price

You do not need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.

Get a fixed price

Related advice

About our bath re-enamelling in Gillamoor

Most baths are re-enamelled in a day, and you can use the bath the day after. Nothing is disconnected or removed. We regularly repair Victorian roll-tops, acrylic baths and pressed steel baths, and people most often call us about stains that won’t shift and a peeling or bubbling previous coating.

Every repair comes with a one-year guarantee, wherever you are in North Yorkshire.

Location
Gillamoor (YO62)
Region
North Yorkshire
Warranty
A year, on every repair
Price
From £350. Fixed and free, based on photos
Call
0345 017 0787
Updated
23 October 2026
Roll-top bath being refinished by a Surface Doctor technician

What affects the price in Gillamoor

Prices start from £350. We don’t charge extra for travel to Gillamoor. The price comes down to:

  • Whether it’s a chip, crack, burn or wear
  • Any earlier repairs that need removing first
  • Whether we combine several jobs
  • The size and number of damaged areas

The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. We give a fixed price from your photos, so you know the cost before you book.

Send photos for a quote

Before you send photos, these tips help us give you a firm price:

  • A coin or ruler next to the damage for scale
  • One picture of the entire bath
  • What it’s made of, if you know
  • Daylight if possible, and no flash reflection

The quickest way to a price is to send two or three photos using our quote form or ring us. We will tell you honestly if a repair is the right fix.

Work for landlords and builders

For anyone letting property in or around Gillamoor, we can repair and quote for several addresses together. Just send pictures for each address and we’ll price them together.

We’re used to working with agents and managing companies. Send the address, photos and access details.

How to care for the repair

Once the work has cured, treat it gently:

  • Don’t leave bottles, razors or sponges standing on the surface
  • Do not use the bath until it has fully cured
  • Wipe the bath dry after use in hard water areas
  • Have chips seen to early

Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Repair dripping taps promptly.

Leave a peeling coating alone. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.

What your bath is made of matters

Acrylic

Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.

Pressed steel

Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.

When to call us in Gillamoor

Previous coatings can fail too, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.

People normally call us when they notice one of these:

  • Thin, worn enamel in places
  • A bath that stays dull however much you clean it
  • Staining under the taps and around the waste
  • Chips and rust in more than one place

Questions to ask before you book

  • Who will actually do the work
  • How soon you can use it again
  • What preparation is included
  • How to look after the finish

How to compare quotes

Can I fix it myself?

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

Questions from Gillamoor

What happens next?

We check the damage, the material and your postcode, then reply with a quote and the next dates we have.

Do you work in Gillamoor?

Yes, we do. We send a technician to Gillamoor for every job, and the price is the same as everywhere else.

Are there extra charges for Gillamoor?

There is no separate call-out charge. Your fixed quote includes everything.

Is it messy?

No. The work area is masked and covered, and we take our waste away with us.

Can you redo someone else’s repair?

In most cases. The old repair comes out first, so mention it when you send photos.

Are you a vetted contractor?

Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Can pets and children be at home?

On the day, the room should be kept clear of pets and children.

How quickly can you book me in?

We’ll give you dates with your quote. Tell us if you need it done quickly.

Our work in Gillamoor

Gillamoor is about 16 miles south of Guisborough, in North Yorkshire. We agree a date that works for you, and we’ll give you an arrival time in advance, so you are not left waiting in all day. Gillamoor is one of 626 places in North Yorkshire we cover. We work right across the region, from Gillamoor to Leeds (42 miles away).

We cover every part of YO62 and the streets around it. You will find streets such as Main Street and Woodhead Field Lane, and we cover them all. Other places close to Gillamoor include Fadmoor (1 mile south-west), Hutton-le-Hole (1 mile east), Kirkbymoorside (2 miles south), Spaunton (3 miles east) and Keldholme (3 miles south-east). Larger places within reach include Malton (13 miles south-east), Pickering (8 miles south-east), Stokesley (15 miles north-west), Norton-on-Derwent (14 miles south-east), Great Ayton (15 miles north-west) and Helmsley (6 miles south-west).

Around Gillamoor

Our customers here include homes close to Royal Oak pub and Church of St Aidan.

Map of Gillamoor © OpenStreetMap contributors

What we cannot put right

Before you book, it’s worth knowing the limits too:

  • Leaking taps or wastes (a plumber’s job)
  • An acrylic bath that flexes badly underfoot
  • A cast iron or steel bath that’s cracked right through

If in doubt, send pictures and we’ll say what we think.

Surfaces we repair

  • Cast iron baths
  • Pressed steel baths
  • Basins & shower trays
  • Acrylic baths
  • Victorian roll-tops
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.