North Yorkshire · England
Bath Re-enamelling for Norton-on-Derwent homes
Full bath re-enamelling and resurfacing in Norton-on-Derwent, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Wear marks under the taps
- A roll-top that is seen better days
How the visit works
On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a full day. We clean up when we’re done and tell you when it’s ready to use.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the day after.
How to prepare
- Mention any earlier repairs or resurfacing
- Clear toiletries, mats and anything else from around the area
- Open a window if you can
How to get a price
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, add your postcode and send them to us. What comes back is a fixed price, not a guess.
Advice
Bath re-enamelling at your home in Norton-on-Derwent
A re-enamelled bath looks and feels like a new one, but without the cost and upheaval of a refit. It’s ideal if you like your bathroom but not the state of the bath. Typical jobs include brown or grey marks that don’t clean off and an outdated colour you’d like to change, in pressed steel baths, acrylic baths and basins & shower trays.
Big or small, you get the same one-year guarantee.
- Location
- Norton-on-Derwent (YO17)
- County
- North Yorkshire
- Warranty
- A year, on every repair
- Price
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Different materials, different repairs
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel frequently rusts by the plughole, so we check it carefully.
What we can’t put right
We won’t take on work that will not last, so here’s what a repair can’t put right:
- A cast iron or steel bath that’s cracked right through
- Acrylic that moves when you stand in it
- A bath that is rusted through
Send us photos and we will tell you honestly.
Materials we repair
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
Where we work around Norton-on-Derwent
Norton-on-Derwent is about 14 miles north of Pocklington, in North Yorkshire. Our technicians come to clients in Norton-on-Derwent and nearby villages, so there’s no workshop to go to. We cover 626 places in North Yorkshire. Our nearest city page is Leeds, about 38 miles away.
Every address in YO17 is covered, from the main roads to the quietest streets. That includes homes on Dean Road, Beverley Road and Howe Road. Norton-on-Derwent is on the B1248, so it’s easy for us to reach. If you’re just outside Norton-on-Derwent, we cover Sutton (1 mile south-west), Malton (1 mile north-west), Old Malton (1 mile north), Settrington (2 miles east) and Scagglethorpe (2 miles east). Within a short drive, we also cover Pickering (8 miles north), Kirkbymoorside (12 miles north-west), Helmsley (14 miles north-west), Thornton-le-Dale (8 miles north), Rillington (4 miles north-east) and East Ayton (15 miles north-east).
What’s near Norton-on-Derwent
Our clients here include homes close to The Union pub, Church of St Peter and Norton Community Primary School, among other places. The closest station to Norton-on-Derwent is Malton station, roughly 0.7 miles west. A little further out are Malton Community Hospital (1.2 miles north-west) and Malton Castle (0.6 miles north-west).
Can I fix it myself?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
Do you need bath re-enamelling in Norton-on-Derwent?
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
Clients typically contact us about:
- Thin, worn enamel in places
- Chips and rust in more than one place
- A coating lifting around the plughole
- A period or roll-top bath worth keeping
Before you book anyone
- How changes to the job are handled
- What protection goes down before work starts
- When it can be used again
- How the colour is matched
Towns and villages near Norton-on-Derwent
More services for Norton-on-Derwent
What affects the price in Norton-on-Derwent
Prices start from £350. Quotes are free and the price is fixed. What we look at:
- Any earlier repairs that need removing first
- How easy the damage is to reach
- How hard the colour is to match
- The type of damage
Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.
How to get a fixed price
Phone pictures are fine. Make sure they show:
- One sharp close-up of the damage
- One picture of the whole bath
- A coin or ruler next to the damage for scale
- Good light, ideally daylight, without flash glare
The quickest way to a price is to send a couple of photos using our quote form or call us. We will say immediately whether it can be repaired.
FAQs for Norton-on-Derwent
What does bath re-enamelling cost?
Resurfacing from £350. Every job gets a fixed quote based on pictures of the damage. Send a close-up of the damage and a wider photo with your YO17 postcode.
Do you need to take the bath out?
No. We resurface it in place, so nothing else is disturbed.
Do the materials smell?
There can be some smell while we work. It fades as everything cures.
How quickly can you book me in?
It depends on the time of year and where you are. We will offer you dates when we send your quote.
Can you redo someone else’s repair?
Generally, yes. Let us know what was used before and we’ll plan for it.
Is there a guarantee?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Do you work in Norton-on-Derwent?
Yes. We cover the whole UK and travel to Norton-on-Derwent and the rest of North Yorkshire. Send pictures and we’ll quote, or call 0345 017 0787.
Can a failed resurfacing be redone?
In most cases. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Why repair rather than replace?
A new bath means a plumber, lifting out the old bath, making good the walls and tiles and several days without a working bathroom. Re-enamelling gives the bath a new finish without moving it. Our bath re-enamelling starts from £350. What it costs depends on the type and amount of damage, the material and how many items we do on one visit. You get a fixed price from your photos, so you know the cost before booking.
Why book with us
- No extra charge for your area
- One-year guarantee on every repair
- A fixed quote before booking
- Dust sheets down, tidy finish
Take a look at our full price list and resurfacing vs replacement cost guide.
Landlords, agents and businesses in Norton-on-Derwent
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which matters when someone is living in the home.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
About our accreditations · Every repair comes with a one-year guarantee.
