Cumbria · England
Bath Re-enamelling in Glassonby
Local bath re-enamelling for Glassonby: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- Worn patches where water runs and sits
- Lots of chips and rust spots
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.
Bath re-enamelling in Glassonby without replacing anything
Many of the baths we re-enamel are period roll-tops, which would be difficult and expensive to replace. Doing them in place keeps an original feature. If you are dealing with a bath in a colour that no longer suits and chips and rust in more than one place, we can help, whatever the material.
Your repair is guaranteed for a year, as with every job we do.
- Area
- Glassonby (CA10)
- County
- Cumbria
- Cover
- A year, on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Nearby places to Glassonby
Also in Glassonby
FAQs for Glassonby
It’s been repaired before. Can you still fix it?
Yes, regularly. It can add a little time, which we include in the quote.
Can you re-enamel a roll-top bath?
Yes. Inside and out if you’d like.
Can you make a coloured bath white?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
Will there be fumes?
Yes, while we are applying the finish. Ventilation keeps it down, and it fades as the finish cures.
How long does re-enamelling last?
It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
I rent my home. Can I book you?
Yes. Check with your landlord; we can send the quote to them too.
When can you do it?
It depends on the time of year and where you are. We will offer you dates when we send your quote.
Will the bath be moved?
No. We resurface it in place, so the tiles and taps stay put.
Looking after it afterwards
Looking after the surface is easy, and it makes a real difference:
- Respect the curing time we give you
- Rinse off hair dye, oils and bath bombs straight away
- Do not leave bottles, razors or sponges standing on the surface
- Don’t leave a chip unrepaired
A quick rinse and wipe after use helps, especially in hard water areas, so limescale can’t build up.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Do you need bath re-enamelling in Glassonby?
The gloss on enamel is thin, and every scrub with an abrasive cleaner takes a little away. Eventually the surface turns porous and stains.
The things clients normally mention when they call are:
- Brown or grey marks that don’t clean off
- Lots of chips and rust spots
- A bath that stays dull however much you clean it
- A roll-top that’s seen better days
What to look for in a quote
- How long it needs to cure
- How the colour is matched
- How to care for the finish
- Whether cleaning and preparation are in the price
Repair or replace in Glassonby?
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Resurfacing from £350, with every job priced individually. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.
Why book with us
- Honest advice, even when it means no job
- No need to remove anything
- One-year guarantee on every repair
- Colour-matched on site
Take a look at our pricing and bath cost comparison.
Different materials, different repairs
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Landlords, agents and businesses in Glassonby
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Hospitality businesses can’t afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
Our work in Glassonby
Glassonby is about 7 miles north-east of Penrith, in Cumbria. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Glassonby is one of 438 towns and villages in Cumbria where we work. Our nearest city page is Newcastle upon Tyne, about 44 miles away.
Our visits in CA10 are booked in the same way as anywhere else. We also cover the places around Glassonby: Gamblesby (2 miles east), Little Salkeld (2 miles south), Unthank (2 miles north-east), Hunsonby (2 miles south) and Great Salkeld (2 miles south-west). We also work in nearby towns such as Carlisle (15 miles north-west), Penrith (7 miles south-west), Currock (14 miles north-west), Botcherby (14 miles north-west), Morton (15 miles north-west) and Harraby (14 miles north-west).
Local landmarks in Glassonby
Typical jobs here are in homes near Church of St Michael. Glassonby’s nearest station is Lazonby & Kirkoswald station, roughly 1.9 miles west. Other landmarks nearby include Kirkoswald Castle (1.7 miles north-west).
How the visit works
A typical visit goes like this: we arrive on time, protect everything around the work area, do the job and clear up. Plan for a full day. Before leaving, we tell you when it can be used and what to avoid for the first few days.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can generally be used the day after.
Preparing for the visit
- Have a window or extractor fan available
- Point us to the nearest place to park
- Mention if the room is upstairs or in a flat
Ask for a price
We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Related advice
What affects the price in Glassonby
Resurfacing from £350. We give every job a fixed quote from pictures. This is what makes a difference:
- How easy the damage is to reach
- The material
- How hard the colour is to match
- Whether we combine several jobs
The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. We give a fixed price from your photos, so there are no surprises on the day.
Send pictures for a quote
Most quotes are done from photos alone. To help us price it:
- Daylight if possible, and no flash reflection
- Whether it’s been repaired or coated before
- One picture of the whole bath
- A coin or ruler next to the damage for scale
Email us pictures of the damage and one of the entire item, and tell us you are in Glassonby, and we’ll reply with a fixed price.
About our accreditations · Every repair comes with a one-year guarantee.
