Cumbria · England

Bath Resealing in Glassonby

Bath resealing in Glassonby without the cost of replacing. Send us photos for a fixed quote, then we come to you.

  • Black mould in the sealant
  • An untidy old seal
  • Discoloured, yellow sealant
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath resealing in Glassonby

Landlord and trade work in Glassonby

Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.

We’re used to working with agents and managing companies. Send the address, photos and access details and we will handle the rest.

Bath resealing at your home in Glassonby

A proper reseal starts with removing every trace of the old silicone. Fresh sealant doesn’t stick to old, which is why many DIY jobs peel. Our technicians work on shower trays & enclosures, basins & vanity units and wet rooms, and the jobs we see most are mould you can’t clean out and missing sealant behind the taps.

The work is covered for a year after we finish. Just call us if there’s a problem and we’ll sort it.

Where
Glassonby (CA10)
Region
Cumbria
Cover
12 months on all our work
Quotes
Fixed and free, based on photos
Phone
0345 017 0787
Page updated
23 October 2026
Surface Doctor technician refinishing the outside of a roll-top bath

What we do, step by step

Visits start with a quick look at the job together. Next, we cover and mask everything nearby and we start. It normally takes a couple of hours.

  1. We cut out all of the old sealant.
  2. Residue is removed and the joint cleaned.
  3. We treat mould and dry the joint thoroughly.
  4. We fill the bath, or weight the tray, to open the joint.
  5. New mould-resistant silicone is applied and tooled neatly.

Preparing for the visit

  • Mention if the room is upstairs or in a flat
  • Mention any parking restrictions or tricky access
  • Point us to the nearest place to park

Get a quote

Send us a picture of the damage and one of the entire item, and tell us you are in Glassonby, and we’ll come back with a fixed quote.

Send photos for a quote

Related advice

Questions from Glassonby

Can you price it without visiting?

Nearly always. If pictures do not show enough, we’ll ask for another angle.

Do you seal over the old sealant?

No, we never seal over old silicone. The old sealant is cut out and the joint cleaned and dried.

Is it messy?

Dust sheets and masking go down before we start, and we clean up when we have finished.

How long does a reseal take?

Around two hours for a bath, plus curing time.

What happens next?

You will get a fixed quote back. There’s no obligation to book.

Is there a guarantee?

All our work carries our one-year guarantee. Ask us what it covers when you get your quote.

Does someone need to be in?

We need someone to let us in. You do not need to watch us work.

Why does the silicone keep cracking?

Typically because the bath or tray moves, or it was sealed with the bath empty. We fill the bath before sealing it.

Looking after it afterwards

Aftercare is simple:

  • Let steam out after showers
  • Clean the joints with a mild cleaner
  • Do not stand toiletries on the seal
  • Reseal when black spots won’t clean off

Keep the room well ventilated, and wipe the joints after use to keep mould away.

Reseal before water gets in. Gaps or lifting edges mean it needs doing.

Repairs by material

Baths

We fill the bath before sealing, to open the joint fully.

Shower trays

We put weight on a tray before sealing it, so the joint is at its widest.

When to call us in Glassonby

Sealant splits when the bath or tray moves, frequently because it was sealed while the bath was empty.

Most people contact us when they notice one of these:

  • Gaps by the taps
  • Damp near the bath
  • Old sealant that looks dirty
  • Black spots in the silicone

Comparing quotes

  • Whether the colour is mixed to match
  • A fixed quote, and whether VAT is included
  • Who will actually do the work
  • What preparation is included

Our hiring checklist

Why reseal now?

A reseal is one of the cheapest bathroom jobs there is and protects the walls and floor. Leaving failed sealant can let water cause damage that costs far more to fix. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you will get a fixed figure.

What you get with us

  • Accredited with CHAS, Constructionline and SafeContractor
  • Most jobs done in one visit
  • Rooms protected and left tidy
  • Repair technicians who travel to you, UK-wide

See our pricing.

Covering Glassonby

Glassonby is about 7 miles north-east of Penrith, in Cumbria. Our repair technicians come to customers in Glassonby, so there is no workshop to go to. We work in 438 places across Cumbria. You can also see our page for Newcastle upon Tyne, about 44 miles away.

Here we cover the CA10 postcode area. Neighbouring places we cover include Gamblesby (2 miles east), Little Salkeld (2 miles south), Unthank (2 miles north-east), Hunsonby (2 miles south) and Great Salkeld (2 miles south-west). We also work in nearby towns such as Carlisle (15 miles north-west), Penrith (7 miles south-west), Currock (14 miles north-west), Botcherby (14 miles north-west), Morton (15 miles north-west) and Harraby (14 miles north-west).

Around Glassonby

Our clients here include homes close to Church of St Michael and the streets around them. The nearest railway station is Lazonby & Kirkoswald station, about 1.9 miles west of the centre. Further afield, we also cover the area around Kirkoswald Castle (1.7 miles north-west).

Map of Glassonby © OpenStreetMap contributors

What we can’t put right

Some jobs aren’t right for a repair, including:

  • Very wide gaps that need a trim
  • Tiles that move, until they’re refixed
  • Hidden water damage

If in doubt, send photos and we’ll say what we think.

Materials we repair

  • Kitchen worktops & sinks
  • Shower trays & enclosures
  • Wet rooms
  • Baths
  • Basins & vanity units

Prices and what affects them

You will know the full cost before you book. We look at:

  • The material and finish
  • Access to the area
  • Doing more than one item at once
  • What kind of damage it is

What it costs depends on the type and amount of damage, the material and how many jobs we combine into one visit. You get a fixed price from your photos, so there are no surprises on the day.

Send photos for a quote

The better the photos, the more accurate the price. Here’s what helps:

  • Any earlier repairs or coatings
  • A photo taken from further back
  • Where you are, by postcode
  • One sharp close-up of the damage

There is no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.