Highland · Scotland
Bath re-enamelling & resurfacing in Glen Moriston, Highland
Bath re-enamelling in Glen Moriston without the cost of replacing. Send us photos for a fixed quote, then we come to you.
- Resurfacing from £350
- A bath in a colour that no longer suits
- Wear marks under the taps
What your bath is made of matters
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.
Bath re-enamelling in Glen Moriston, done in place
Resurfacing renews the whole surface of the bath without taking anything out. It’s the answer when the whole bath is tired rather than one spot. Common call-outs are for a roll-top that’s seen better days and brown or grey marks that don’t clean off, across acrylic baths, Victorian roll-tops and pressed steel baths.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Where
- Glen Moriston (IV63)
- Region
- Highland
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
What bath re-enamelling costs
Resurfacing from £350. Each job gets its own fixed quote. These are the things that affect it:
- How much damage there is
- Whether we combine several jobs
- Any earlier repairs that need removing first
- Whether it’s a chip, crack, burn or wear
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send photos and you’ll get a fixed figure.
How to get a fixed price
We price nearly every job from photos. This is what to send:
- Where you are, by postcode
- A clear, close picture of the problem area
- A coin or ruler next to the damage for scale
- Natural light rather than flash
Send us pictures of the damage and one of the entire item, with your IV63 postcode, and we will reply with a fixed quote.
Keeping it looking good
Once the work has cured, treat it gently:
- Respect the curing time we give you
- Wash away dyes and oils after use
- Stick to gentle, non-abrasive cleaners
- Wipe the bath dry after use in hard water areas
Rinse the bath and wipe it over after use, especially in hard water areas, to stop limescale building up.
If a previous coating is starting to peel, do not pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.
When to call us in Glen Moriston
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
Customers usually contact us about:
- Chips and rust in more than one place
- A coating lifting around the plughole
- Worn patches where water runs and sits
- A bath in a colour that no longer suits
Before booking anyone
- Whether the price covers travel
- Aftercare advice
- Who will actually do the work
- Whether the price is fixed and includes VAT
How the visit works
When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a full day. We tidy up before we leave and tell you when it’s ready to use.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- Once cured, normally by the following day, the bath is ready.
Before we arrive
- Tell us if there are stairs or a lift
- Move bottles, mats and clutter away from the area
- Plan for the room to be out of bounds to pets and children
How to get a price
A quote takes minutes to ask for: photograph the damage, then the whole bath, include your postcode and send them to us. What comes back is a fixed price, not a guess.
Related advice
Our work in Glen Moriston
Glen Moriston is about 30 miles south-west of Inverness, in Highland. Book a date that suits you, and we’ll give you an arrival time in advance, so you’re not left waiting in all day. Glen Moriston is one of 253 towns and villages in Highland we cover.
All of IV63 is covered. Nearby, we also work in Fort Augustus (5 miles south-east), Newtown (6 miles south-east), Aberchalder (6 miles south-east), Invermoriston (7 miles north-east) and Laggan (10 miles south). Remote and island addresses take a little more planning, so call us to arrange it.
Local landmarks in Glen Moriston
Open spaces near Glen Moriston include Clach-bheinn and Loch nan Gobhar.
Landlord and trade work in Glen Moriston
We carry out planned and one-off repairs for housing associations and facilities teams in Highland and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
If you manage property in Glen Moriston, we can repair and quote for several addresses together. Just send photos for each address and we will come back with a combined price.
Towns and villages near Glen Moriston
More services for Glen Moriston
Should I try a DIY kit first?
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Should you replace it?
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Prices start from £350. A repair normally costs much less than people expect, particularly next to the cost of replacement. Send pictures and we’ll give you the exact figure.
Why choose Surface Doctor in Glen Moriston
- A year’s guarantee on all work
- No need to remove anything
- A fixed quote before you book
- Accredited with CHAS, Constructionline and SafeContractor
Take a look at our pricing and bath cost comparison.
Your questions about bath re-enamelling in Glen Moriston
Can you resurface a pink bath in white?
Yes, white is the usual choice. Mention the colour you want when you send photos.
Is repairing better than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
Do you need to take the bath out?
Not at all. We work on the bath in place, with the room protected and ventilated.
Do you work in Glen Moriston?
Yes. We work across the UK and travel to Glen Moriston and the rest of Highland. Send photos and we will quote, or call 0345 017 0787.
Can you repair something that’s been repaired before?
Most of the time. Let us know what was used before and we’ll plan for it.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes. Removing the old finish takes extra time, which we include in the price.
How do I get a price for bath re-enamelling in Glen Moriston?
Resurfacing from £350. Because every job differs, we price from pictures. You’ll get a fixed figure before you book.
How soon can you come?
Your quote comes with available dates. If it’s urgent, say so and we will do what we can.
About our accreditations · Every repair comes with a one-year guarantee.
