Edinburgh · Scotland

Bath re-enamelling & resurfacing in Glenbrook, Edinburgh

We travel to Glenbrook for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.

  • Resurfacing from £350
  • Chips and rust in more than one place
  • Brown or grey marks that do not clean off
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling for Glenbrook homes

Common problems we fix in Glenbrook

Enamel doesn’t fail overnight. Abrasive cleaners, limescale and years of use wear the gloss away, starting where water runs and sits.

People usually call us after spotting one of these:

  • Chips and rust in more than one place
  • Brown or grey marks that do not clean off
  • A coloured bath you want in white
  • A peeling or bubbling previous coating

Comparing quotes

  • Whether a trained technician does the job
  • What the guarantee covers, and for how long
  • What happens if the damage is worse than the photos show
  • How to look after the finish

Our hiring checklist

About our bath re-enamelling in Glenbrook

Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. If you’re dealing with enamel that’s lost its shine and feels rough and several chips and rust patches, we can usually put it right.

Your repair is guaranteed for a year, as with every job we do.

Roll-top bath being refinished by a Surface Doctor technician
Location
Glenbrook (EH14)
County
Edinburgh
Cover
One year on every repair
Quotes
From £350. Fixed and free, based on pictures
Call
0345 017 0787
Updated
23 October 2026

When we would advise against a repair

We will always be straight with you, so here’s what a repair can’t fix:

  • A cast iron or steel bath that’s cracked right through
  • Steel that has corroded right through
  • Plumbing leaks, which need a plumber

If in doubt, send pictures and we’ll say what we think before you book.

Materials we repair

  • Basins & shower trays
  • Cast iron baths
  • Acrylic baths
  • Victorian roll-tops
  • Pressed steel baths

Work for landlords and builders

Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We will fit around changeovers where we can.

We work for landlords, letting agents and housing providers in Glenbrook as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.

Keeping it looking good

After the repair has cured, a few habits help it last:

  • Use washing-up liquid and a soft cloth
  • Rinse off hair dye, oils and bath bombs straight away
  • Don’t leave a chip unrepaired
  • Keep toiletries on a shelf rather than in the bath

The first few days matter most: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.

If a previous coating is starting to peel, do not pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.

The process

Expect a friendly, tidy visit. We confirm the time with you beforehand, cover and mask the work area, and get on with the job, which typically takes the best part of a day. If we find something your pictures didn’t show, we will explain it before carrying on.

  1. The bathroom is protected and ventilation set up.
  2. We remove the old silicone and deep clean the bath.
  3. We repair chips, rust spots and pitting.
  4. We key the bath and apply a bonding primer.
  5. The new finish is sprayed on in several coats and left to cure until the next day.

Before we arrive

  • Let the surface dry out before the visit
  • Move bottles, mats and clutter away from the area
  • Tell us if there are stairs or a lift

How to get a price

For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.

Send pictures for a quote

Advice

Different materials, different repairs

Roll-top and period baths

Freestanding roll-tops can be done inside and out, with the outside refinished as well.

Acrylic

Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.

What affects the price in Glenbrook

Resurfacing from £350. Quotes are free and the price is fixed. What we look at:

  • How easy the damage is to reach
  • What the surface is made of
  • Unusual colours or finishes
  • Doing more than one item at once

It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.

Quotes from your photos

Before you send photos, these tips help us give you a firm price:

  • Good light, ideally daylight, without flash glare
  • One picture of the whole bath
  • Details of any past repairs
  • Something in shot to show the size

We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.

Can I fix it myself?

A DIY attempt is not a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.

It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.

Glenbrook: your questions answered

Can you redo someone else’s repair?

Generally, yes. We remove the old repair before doing a new one.

How much does bath re-enamelling cost in Glenbrook?

Prices start from £350. Because every job differs, we price from pictures. You know the full cost before anything is booked.

Will there be a smell?

It depends on the job, but often a little. Ventilation keeps it to a minimum.

Does someone need to be in?

Yes. The technician needs access to the room for the visit, at a time that suits you.

Can you re-enamel a roll-top bath?

Yes. Inside and out if you’d like.

How do I book?

Send pictures through the quote form or call 0345 017 0787, and we will do the rest.

I’m a tenant. Can you help?

We are happy to deal with the tenant, landlord or agent. Just make sure the landlord agrees.

How long does re-enamelling last?

It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.

Our work in Glenbrook

Glenbrook is about 6 miles east of Livingston, in Edinburgh. We agree a date that works for you, and you’ll know when to expect us, so you’re not left waiting in all day. We cover 175 places in Edinburgh, from the larger towns to small villages. Our jobs stretch from Glenbrook to Edinburgh (about 8 miles away).

Here we cover the EH14 postcode area. Other places close to Glenbrook include Balerno (1 mile east), Warriston (2 miles north-east), Linburn (2 miles north-west), Kirknewton (2 miles west) and Wilkieston (2 miles north-west). Further out, we also cover Edinburgh (8 miles north-east), Leith (10 miles north-east), Bonnington (10 miles north-east), Greenside (9 miles north-east), Broughton (9 miles north-east) and Bellevue (9 miles north-east).

What’s near Glenbrook

We visit homes around Malleny Park, Balerno Community High School and Balerno Parish Church, among other places. Glenbrook’s nearest station is Curriehill station, about 2.4 miles north-east of the centre. Further afield, we also cover the area around Bavelaw Castle (2.3 miles south-east) and Linburn Centre (2.2 miles north-west). Green spaces nearby include Black Hill.

Map of Glenbrook © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.