Highland · Scotland
Bath re-enamelling & resurfacing in Glencoe, Highland
Bath re-enamelling across Glencoe and nearby, normally in one visit and guaranteed for a year.
- Resurfacing from £350
- Thin, worn enamel in places
- Staining under the taps and around the waste
About our bath re-enamelling in Glencoe
We don’t move the bath, so your taps, tiles and plumbing are left alone. It normally takes one visit, with the bath ready to use the following day. Our repair technicians work on basins & shower trays, pressed steel baths and Victorian roll-tops, and people most frequently call us about a coloured bath you want in white and a peeling or bubbling previous coating.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Location
- Glencoe (PH49)
- Area hub
- Highland
- Cover
- A year, on every repair
- Quote
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
How the visit works
A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, do the job and clear up. Allow most of the day from start to finish. Before we go, we’ll explain when it can be used and how to look after it.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
Preparing for the visit
- Let us know about parking or access
- Clear toiletries, mats and anything else from around the area
- Mention any earlier repairs or resurfacing
Ask for a price
Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and you’ll get a fixed price back. There’s no charge for the quote and you are under no obligation.
Related advice
How we price bath re-enamelling
Prices start from £350. We give every job a fixed quote from photos. These are the things that affect it:
- Access to the area
- What kind of damage it is
- Unusual colours or finishes
- Whether old repairs or coatings need taking off
The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. You get a fixed price from your pictures, so there are no surprises on the day.
Send pictures for a quote
Almost every job we do is priced from pictures. This is what to send:
- Daylight if possible, and no flash reflection
- Something in shot to show the size
- Details of any past repairs
- A wider photo showing the whole bath
To get a price, send two or three photos using our quote form or call us. We will tell you honestly if a repair is the right fix.
Repairing versus replacing in Glencoe
There are times replacing is better: if the bath is cracked through, if you want a different size or shape, or if you’re refitting the entire room anyway. Otherwise, resurfacing normally wins. Our bath re-enamelling starts from £350. Our prices are the same across the UK, with no extra for Glencoe. The job itself decides the price: how much damage, what it’s made of and how many items.
Why us?
- Normally one visit, start to finish
- A fixed quote before you book
- Honest advice, even when it means no job
- Repair technicians who travel to you, UK-wide
Take a look at our pricing and resurfacing vs replacement cost guide.
Your questions about bath re-enamelling in Glencoe
Can you do the outside of a roll-top?
Yes. Inside and out if you’d like.
Do I need to be at home?
Someone needs to let us in and show us the job. You do not need to watch us work.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
What happens after I send pictures?
We come back with a fixed quote, usually with dates to choose from. You’re under no obligation.
Can landlords book you?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses in Glencoe.
Is there a call-out fee?
We don’t add a call-out fee. Your fixed quote includes everything.
Is there any odour?
Expect a mild smell while we’re working, which fades afterwards.
How quickly can you book me in?
That depends on our diary for your area. Send photos with your postcode and we’ll reply with the earliest dates.
Aftercare tips
To keep it looking its best:
- Store bottles off the bath
- A quick wipe after use keeps limescale away
- Do not leave a chip unrepaired
- Use washing-up liquid and a soft cloth
The first few days matter most: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
Where we work around Glencoe
Glencoe is in Highland. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Our technicians cover all 253 towns and villages across Highland, from the larger towns to small villages. We work right across the region, from Glencoe to Glasgow (65 miles away).
Jobs in PH49 work the same way as everywhere else we cover. We also cover the places around Glencoe: Ballachulish (1 mile west), Kentallen (5 miles west), Inchree (5 miles north-west), Kinlochleven (6 miles east) and Kinlochmore (6 miles north-east). Further out, we also cover Fort William (9 miles north), Caol (11 miles north) and Inverlochy (10 miles north). Remote and island addresses take a little more planning, so it’s best to call first.
What’s near Glencoe
We visit homes around Episcopal Church Of St Mary and the streets around them. A little further out are Glencoe Folk Museum (under half a mile east). Green spaces nearby include Loch Achtriochtan.
DIY kit or professional repair?
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.
When to call us in Glencoe
Enamel does not fail overnight. Abrasive cleaners, limescale and years of use wear the gloss away, usually first under the taps and around the waste.
You may need us if you’ve spotted any of these:
- A peeling or bubbling previous coating
- Stains that will not shift
- Chips and rust in more than one place
- An original cast iron bath that needs restoring
What your quote should include
- Whether there are any call-out or travel charges
- How the room is protected while they work
- Whether the price is fixed and includes VAT
- What preparation is included
Landlord and trade work in Glencoe
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Letting agents frequently send us photos straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Towns and villages near Glencoe
More services for Glencoe
Materials and what they mean for the repair
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
About our accreditations · Every repair comes with a one-year guarantee.
