Highland · Scotland
Bath Re-enamelling for Golspie homes
Damaged bath in Golspie? We put it right where it is, match it on site and guarantee the work for a year.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- A peeling or bubbling previous coating
How we handle bath re-enamelling in Golspie
We re-enamel a lot of period and roll-top baths, which are heavy, hard to move and costly to replace. Doing them in place keeps an original feature. If you’re dealing with an outdated colour you’d like to change and stains that won’t shift, we can help.
You are covered for a year from the day of the repair. Just call us if there is a problem and we will come back.
- Location
- Golspie (KW10)
- County
- Highland
- Cover
- One year on every repair
- Quote
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Our work in Golspie
Golspie is about 27 miles north of Nairn, in Highland. We visit homes and businesses in Golspie and nearby villages, so nothing has to leave your home. We cover all 253 towns and villages in Highland, from the larger towns to small villages.
All of KW10 is covered. Jobs here include addresses on Main Street, Station Road and East Millicent Avenue and the roads around them. If you’re just outside Golspie, we cover Littleferry (3 miles south-west), Skelbo Muir (4 miles south-west), Embo (5 miles south), Brora (5 miles north-east) and Hilton (5 miles south). Within a short drive, we also cover Tain (12 miles south), Dornoch (7 miles south) and Balintore (15 miles south). For island and remote addresses, call first so we can plan the visit.
Around Golspie
Around Golspie, we work in homes near Golspie High School and Free Church of Scotland Church. Golspie has its own railway station: Golspie station. Nearby you’ll also find Dunrobin Castle (1.3 miles north-east) and Dunrobin Castle Museum (1.4 miles north-east). Green spaces nearby include Loch Fleet National Nature Reserve and Ben Bhraggie.
Do you need bath re-enamelling in Golspie?
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.
It’s worth getting a quote if you see:
- A period or roll-top bath worth keeping
- Chips and rust in more than one place
- A dull, rough surface that won’t come clean
- Wear marks under the taps
Comparing quotes
- The length of the guarantee and what it covers
- Who will actually do the work
- What happens if the damage is worse than the pictures show
- Whether the price covers travel
Your questions about bath re-enamelling in Golspie
Do you cover Golspie?
We do. We send a technician to Golspie for every job, with no extra charge for travel.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
What if the damage is worse than the pictures show?
If we find something the photos didn’t show, we explain it first. The price only changes if you agree.
What happens once I’ve sent pictures?
You get a fixed price and available dates. If we need another angle, we’ll ask.
Can you re-enamel a roll-top bath?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Is my repair covered?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Will there be fumes?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
Keeping it looking good
Once the work has cured, treat it gently:
- Wash away dyes and oils after use
- Clean with a soft cloth and mild detergent
- Leave the bath for the full curing time before using it
- Keep suction mats out of the bath
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Fix dripping taps quickly.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.
Places near Golspie
Other services in Golspie
Different materials, different repairs
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. The bath needs to be firm and well supported.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we check it carefully.
What bath re-enamelling costs
Prices start from £350. Prices are worked out job by job. The main factors are:
- Whether it’s a chip, crack, burn or wear
- How hard the colour is to match
- What the surface is made of
- Access to the area
No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
Send pictures for a quote
Most quotes are done from pictures alone. To make it quick:
- Good light, ideally daylight, without flash glare
- Your postcode, so we can check dates
- One picture of the entire bath
- Any details about the material
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
DIY kit or professional repair?
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
How the visit works
Nothing needs to be moved out of the room beforehand. Everything we use comes in the van with us, put protection down and get going once we’ve agreed what we are doing. It usually takes the best part of a day, and you’re welcome to carry on with your day while we work.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can typically be used the next day.
Before we arrive
- Let the surface dry out before the visit
- Mention any earlier repairs or resurfacing
- Plan for the room to be out of bounds to pets and children
Get a quote
For a price in Golspie, the easiest route is photos: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Read more
Honest limits
To be straight with you, there are a few things a repair won’t fix:
- Holes rusted through the metal
- An acrylic bath that flexes badly underfoot
- Plumbing leaks, which need a plumber
If in doubt, send photos and we will say what we think.
Materials we repair
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
Repair or replace in Golspie?
Replacing a bath can take several days across several trades. Re-enamelling is one technician, typically one day, and the bath is usable the day after. Our bath re-enamelling starts from £350. Our prices are the same across the UK, so there’s no premium for Golspie. What changes the price is the job itself: how much damage, what it’s made of and how many items.
What you get with us
- Honest advice, even when it means no job
- A fixed quote before booking
- One visit for most repairs
- One-year guarantee on every repair
Read our full price list and bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
