Wolverhampton · England

Bath re-enamelling & resurfacing in All Saints, Wolverhampton

Full bath re-enamelling and resurfacing for householders, landlords and businesses in All Saints. Free, fixed quotes from your photos.

  • Resurfacing from £350
  • A period or roll-top bath worth keeping
  • Brown or grey marks that do not clean off
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath re-enamelling in All Saints

Prices and what affects them

Prices start from £350. We charge the same across the UK, including All Saints. The price reflects:

  • The colour and finish to match
  • How easy the damage is to reach
  • Any earlier repairs that need removing first
  • How many areas need work

It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.

Quotes from your pictures

Phone photos are fine, there’s no need for anything special. Ensure they show:

  • The postcode, so we can plan the visit
  • Details of any past repairs
  • One picture of the entire bath
  • Any details about the material

Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed price the same day in most cases.

Bath re-enamelling in All Saints, done in place

We re-enamel plenty of period and roll-top baths, which are heavy, hard to move and costly to replace. Doing them in place keeps an original feature. Our repair technicians work on cast iron baths, pressed steel baths and acrylic baths, and common reasons people get in touch are staining under the taps and around the waste and an original cast iron bath that needs restoring.

Whatever the size of the job, you get the same one-year guarantee.

Where
All Saints (WV2, WV1, WV3)
Region
Wolverhampton
Guarantee
A year, on every repair
Quote
From £350. Free and fixed, from your pictures
Phone
0345 017 0787
Updated
23 October 2026
Before and after: an old basin refinished to bright white

Repair or replace: which is better?

If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Nothing else is disturbed. Our bath re-enamelling starts from £350. Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.

Why us?

  • Colours mixed by hand to suit your surface
  • Honest advice, even when it means no job
  • Fixed prices from your photos
  • No need to remove anything

See our prices page and guide to resurfacing and replacement costs.

All Saints questions

Will the price change on the day?

The price is fixed for what the pictures show. Anything extra is discussed before we begin.

Someone resurfaced my bath and it’s peeling. Can you help?

Yes. Removing the old finish takes extra time, which we include in the price.

Can I add another job to the visit?

Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.

How quickly can you book me in?

It depends on the time of year and where you are. We’ll offer you dates when we send your quote.

How durable is a resurfaced bath?

It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.

Will you leave a mess?

Very little mess: we sheet and mask everything nearby, and we leave the room clean.

Is a repair better than a new one?

In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.

Is there a call-out fee?

No. Our quotes include travel, and we charge the same wherever you are.

Landlord and trade work in All Saints

We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.

Landlords, letting agents and housing providers in All Saints use us as well as householders. Repairing between tenancies keeps void periods short, and it generally costs far less than a refit.

Keeping it looking good

Aftercare is simple, and it makes a real difference:

  • Get any chip repaired quickly
  • Stick to gentle, non-abrasive cleaners
  • Do not leave bottles, razors or sponges standing on the surface
  • Don’t let dyes or oils sit on the finish

Wipe the bath dry after use where you can, especially in hard water areas, and rinse off any bath products.

Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.

What we do, step by step

We turn up at the time we agreed with you and checks the damage against your pictures first. Dust sheets and masking tape go down before we open a single tin. Most visits take a full day, and the room is left clean and tidy.

  1. First we protect the bathroom and set up ventilation.
  2. Next we degrease the bath and fix chips and rust spots.
  3. We key the surface and put on a bonding primer.
  4. We spray on the new enamel finish in several coats.
  5. The bath is left to cure and can normally be used the day after.

Getting ready for the visit

  • Clear toiletries, mats and anything else from around the area
  • Keep children and pets away from the room on the day
  • Point us to the nearest place to park

Get a quote

The quickest way to a price is to send a couple of photos using our quote form or ring us. We will tell you honestly if a repair is the right fix.

Get a free quote

Read more

Where we work around All Saints

All Saints is about 1 mile south of Wolverhampton, in Wolverhampton. Book a date that suits you, and you will know when to expect us, so there is no waiting around. Our repair technicians cover 96 places across Wolverhampton. You can also see our page for Birmingham, about 12 miles away.

Here we cover the WV2, WV1 and WV3 postcode area. From Pond Lane, The Square and Forge Road or anywhere nearby, we can come to you. Main roads around All Saints include the A454, which makes travel easy. We also travel to Horseley Fields (1 mile north), Blakenhall (1 mile south-west), Graiseley (1 mile west), Rough Hills (1 mile south-east) and Wolverhampton (1 mile north). Within a short drive, we also cover Coseley (3 miles south-east), New Invention (4 miles north-east), Gornal (4 miles south), Perton (4 miles west), Tibbington (4 miles south-east) and Princes End (3 miles south-east).

What’s near All Saints

Typical jobs here are in homes near Catholic Church of St Mary and St John, East Park and All Saints Church, among other places. Nearby too are Duke of York pub (0.5 miles north-west), SS. Mary and John's Catholic Primary Academy (under half a mile south), Royal Wolverhampton School (0.9 miles south-west) and South Wolverhampton and Bilston Academy (1.1 miles south). The closest station to All Saints is Wolverhampton station, roughly 0.6 miles north of the centre. Other landmarks nearby include Royal Hospital (less than half a mile north) and Dudley Castle (4.8 miles south). The countryside around All Saints includes Peascroft Wood and Beacon Hill.

Map of All Saints © OpenStreetMap contributors

What your bath is made of matters

Roll-top and period baths

We can resurface a roll-top inside and out, with the outside refinished as well.

Cast iron

Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.

Common problems we fix in All Saints

Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. Eventually the surface turns porous and stains.

Get in touch if you’ve noticed any of these:

  • Brown or grey marks that do not clean off
  • An original cast iron bath that needs restoring
  • Chips and rust in more than one place
  • A peeling or bubbling previous coating

What to look for in a quote

  • Whether the price covers travel
  • Who turns up on the day
  • How the room is protected while they work
  • What the guarantee covers, and for how long

10 questions to ask before you book

DIY repairs versus a professional job

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.