Buckinghamshire · England
Bath Re-enamelling in Granborough
Local bath re-enamelling for Granborough: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Enamel that is lost its shine and feels rough
- Worn patches where water runs and sits
Keeping it looking good
A little care keeps the finish looking good. Our advice:
- Store bottles off the bath
- Don’t use the bath until it has fully cured
- Have chips seen to early
- A quick wipe after use keeps limescale away
Dry the bath after use if possible, especially in hard water areas, and rinse off any bath products.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Bath re-enamelling in Granborough, done in place
Resurfacing renews the whole surface of the bath without a refit. It suits baths that are dull, stained, rough or chipped all over. We work on pressed steel baths, cast iron baths and basins & shower trays, and people most often call us about lots of chips and rust spots and enamel that’s lost its shine and feels rough.
You are covered for a year from the day of the repair. If anything is not right, ring us and we will come back.
- Area
- Granborough (MK18)
- Area hub
- Buckinghamshire
- Cover
- A year, on every repair
- Price
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Towns and villages near Granborough
What else we do in Granborough
Common questions in Granborough
Will the new finish last?
Look after it and it lasts. Gentle cleaning, no suction mats.
Are there extra charges for Granborough?
No. Our quotes include travel, and we charge the same wherever you are.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Does re-enamelling smell?
Yes, while we’re applying the finish. We set up ventilation and the smell fades as it cures.
Will the bath be moved?
Not at all. We work on the bath in place, with the room protected and ventilated.
Do you cover Granborough?
Yes. We cover the entire UK and travel to Granborough. Send us pictures for a fixed quote, or call 0345 017 0787.
Does someone need to be in?
We need someone to let us in. You do not need to watch us work.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as homeowners.
Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
If you do try a kit, read the instructions carefully, and give it the full curing time. If it does not work out, we can still repair it properly.
Repairing versus replacing in Granborough
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Prices start from £350. The price depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your pictures, so you know the cost before booking.
Why Granborough clients choose us
- No need to remove anything
- Generally one visit, start to finish
- No extra charge for your area
- One-year guarantee on every repair
Read our prices page and bath cost comparison.
When a repair isn’t the answer
Some jobs are not right for a repair, including:
- Anything hidden under an old coating, until we remove it
- A bath that is rusted through
- Plumbing leaks, which need a plumber
Not sure? Send pictures and we’ll give you a straight answer before booking.
What we work on
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
Work for landlords and builders
If you manage property in Granborough, we can repair and quote for several addresses together. Send pictures for each one and we’ll come back with a combined price.
Landlords, letting agents and housing providers in Granborough use us as well as householders. A repair between tenants keeps the property empty for less time, and it typically costs far less than a refit.
Repairs by material
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is what we repair.
What we do, step by step
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the work takes most of the day, depending on what we find, and we finish by cleaning up and talking you through the result.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the following day, the bath is ready.
How to prepare
- Clear toiletries, mats and anything else from around the area
- Make sure the area is dry
- Keep a parking space free if you can
Ask for a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed quote without visiting.
Read more
Prices and what affects them
Prices start from £350. We charge the same across the UK, including Granborough. What changes the price is:
- The type of damage
- Access to the area
- The material and finish
- The colour and finish to match
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.
Send pictures for a quote
You can generally get a fixed price without us visiting. To help us price it:
- Daylight if possible, and no flash reflection
- Details of any past repairs
- One sharp close-up of the damage
- One picture of the entire bath
To get a price, send two or three pictures using our quote form or ring us. We’ll say right away if a repair is the right fix.
Granborough and the surrounding area
Granborough is about 7 miles south-east of Buckingham, in Buckinghamshire. Our technicians come to customers in Granborough and the surrounding area, so you do not need to take anything anywhere. Granborough is one of 263 places in Buckinghamshire where we work. Our jobs stretch from Granborough to London (45 miles away).
Postcode districts we cover here: MK18. Streets in the area include Marks Orchard, Winslow Road and Sovereign Close. Close by, we cover Winslow (2 miles north), Swanbourne (3 miles north-east), Dunton (3 miles east), Great Horwood (4 miles north) and Mursley (4 miles north-east). We also work in nearby towns such as Aylesbury (8 miles south-east), Buckingham (7 miles north-west), Elmhurst (7 miles south-east), Southcourt (9 miles south), Princes Risborough (14 miles south) and Haydon Hill (7 miles south).
Near you in Granborough
Typical jobs here are in homes near Sir Thomas Fremantle School, The Crown pub and Church of St John the Baptist and the streets around them. Other landmarks nearby include Bolbec Castle (3.4 miles south-east).
About our accreditations · Every repair comes with a one-year guarantee.
