Gloucestershire · England
Bath re-enamelling & resurfacing in Grange Village, Gloucestershire
Bath re-enamelling in Grange Village without the cost of replacing. Get a fixed quote from your pictures, then we come to you.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- Thin, worn enamel in places
When to call us in Grange Village
A dull surface stains and holds dirt, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
Typical reasons for a call-out include:
- A roll-top that’s seen better days
- Brown or grey marks that don’t clean off
- Worn patches where water runs and sits
- Chips and rust in more than one place
Comparing quotes
- Whether the colour is mixed to match
- What prep work is covered
- What the guarantee covers, and for how long
- How soon you can use it again
Bath re-enamelling in Grange Village without replacing anything
If your bath is sound but looks tired, resurfacing is normally the best value. There’s no removal, plumbing or tiling involved. Our technicians work on pressed steel baths, basins & shower trays and acrylic baths, and common reasons people contact us are an old resurfacing that’s failing and brown or grey marks that don’t clean off.
We guarantee the work for a year. If there is a problem with the repair within the year, we return and sort it.
- Area
- Grange Village (GL14)
- Region
- Gloucestershire
- Guarantee
- One year on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
When we’d advise against a repair
A few problems are outside what a surface repair can do:
- Leaks from fittings rather than the bath
- A poorly supported acrylic bath, until it’s firmed up
- Holes rusted through the metal
Not sure? Send pictures and we’ll give you a straight answer before booking.
Surfaces we repair
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
Also near Grange Village
Also in Grange Village
Work for landlords and builders
If you manage property in Grange Village, we can repair and quote for several addresses together. Just send photos for each address and we will price them together.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Our work in Grange Village
Grange Village is about 8 miles west of Quedgeley, in Gloucestershire. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Grange Village is one of 470 places in Gloucestershire where we work. Our nearest city page is Birmingham, about 52 miles away.
All of GL14 is covered, from the main roads to the quietest streets. Nearby, we also work in Newnham (1 mile east), Littledean (1 mile north-west), Pope's Hill (1 mile north), Elton (1 mile north-east) and Westbury-on-Severn (3 miles north-east). Within a short drive, we also cover Gloucester (10 miles east), Stroud (11 miles south-east), Brockworth (13 miles east), Quedgeley (8 miles east), Lydney (6 miles south-west) and Innsworth (13 miles north-east).
What’s near Grange Village
We visit homes around Newnham St Peter's Church of England Primary School, Forest E-ACT Academy and Church of St Peter. Other landmarks nearby include Dilke Memorial Hospital (2.4 miles west) and Bledisloe Tump (2.5 miles south). Not far away are Foxes Bridge Bog and Ruardean Hill.
Why repair rather than replace?
Replacing a bath normally involves a plumber, a fitter and a tiler. Resurfacing is one technician, normally in a day, with the bath ready the day after. Our bath re-enamelling starts from £350. Our prices are the same across the UK, with no extra for Grange Village. What changes the price is the job itself: the material, the amount of damage and how many items.
Why us?
- Colours mixed by hand to suit your surface
- Most jobs done in one visit
- One-year guarantee on every repair
- Fixed prices from your pictures
Read our full price list and bath cost comparison.
Materials and what they mean for the repair
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we pay close attention there.
How we price bath re-enamelling
Resurfacing from £350. Quotes are free and the price is fixed. What we look at:
- How much damage there is
- How easy the damage is to reach
- What kind of damage it is
- Previous DIY repairs that have to come out
Set against the cost of replacement, repairing normally costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Quotes from your pictures
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- What it’s made of, if you know
- Good light, ideally daylight, without flash glare
- A close-up of the damage, in focus
- A coin or ruler next to the damage for scale
To get a price, send a couple of pictures using our quote form or ring us. We’ll tell you honestly if a repair is the right fix.
Can I fix it myself?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
Grange Village questions
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.
Can you price it without visiting?
Normally, yes. A close-up and a wider photo are enough to give a fixed quote.
Is the work guaranteed?
Every repair comes with our one-year guarantee. We will explain what it covers when we quote.
Do the materials smell?
Expect a mild smell while we’re working, which fades afterwards.
What happens next?
You get a fixed price and available dates. If we need another angle, we’ll ask.
Can you do the outside of a roll-top?
Yes. We can do the inside and outside.
Does re-enamelling smell?
There is some smell while the coating is applied, so we ventilate the room. It fades as the coating cures.
Can you resurface a pink bath in white?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
How the visit works
Your technician turns up when we said we would, introduces themselves and checks the damage against your photos first. The floor and nearby surfaces are covered before we open a single tin. Most visits take a full day, and the room is left clean and tidy.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- Once cured, normally by the following day, the bath is ready.
Preparing for the visit
- Clear toiletries, mats and anything else from around the area
- Open a window if you can
- Avoid using the area for a few hours before we arrive
Get a quote
You don’t need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will reply with a fixed quote.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
