Gloucestershire · England
Bath re-enamelling & resurfacing in Littledean, Gloucestershire
Bath re-enamelling in Littledean without the cost of replacing. Send us pictures for a fixed quote, then we come to you.
- Resurfacing from £350
- A coloured bath you want in white
- A coating lifting around the plughole
Bath re-enamelling in Littledean without replacing anything
Re-enamelling is a one-day job for most baths, with the bath ready to use the following day. Taps, tiles, panels and plumbing all stay in place. We work on acrylic baths, Victorian roll-tops and basins & shower trays, and common reasons people contact us are a peeling or bubbling previous coating and an original cast iron bath that needs restoring.
Whatever the size of the job, you get the same one-year guarantee in Littledean and across Gloucestershire.
- Location
- Littledean (GL14)
- Region
- Gloucestershire
- Cover
- One year on every repair
- Price
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Materials and what they mean for the repair
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we check it carefully.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.
Towns and villages near Littledean
Other services in Littledean
Why repair rather than replace?
A replacement frequently means several trades over several days. Resurfacing takes one technician and typically a day. Resurfacing from £350, with every job priced individually. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.
Why us?
- No need to remove anything
- CHAS, Constructionline and SafeContractor accredited
- Colour-matched on site
- One-year guarantee on every repair
Take a look at our pricing and guide to resurfacing and replacement costs.
When to call us in Littledean
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. We strip what’s failing and start again.
You may need us if you’ve spotted any of these:
- Wear marks under the taps
- A coating lifting around the plughole
- A bath that stays dull however much you clean it
- Several chips and rust patches
Questions to ask before you book
- How changes to the job are handled
- What prep work is covered
- What the guarantee covers, and for how long
- How the room is protected while they work
Where we work around Littledean
Littledean is about 8 miles south-east of Ross-on-Wye, in Gloucestershire. From the centre of Littledean to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We work in 470 places across Gloucestershire, from the larger towns to small villages. Our jobs stretch from Littledean to Birmingham (about 51 miles away).
Our visits in GL14 work the same way as everywhere else we cover. You will find streets such as High Street, Church Walk and Beech Way, and we cover them all. Main roads around Littledean include the A4151, so getting to you is simple. Close by, we cover Pope's Hill (1 mile north-east), Grange Village (1 mile south-east), Newnham (2 miles south-east), Elton (2 miles east) and Plump Hill (2 miles north). Further out, we also cover Gloucester (11 miles east), Stroud (12 miles south-east), Brockworth (14 miles east), Quedgeley (8 miles east), Lydney (7 miles south) and Innsworth (13 miles east).
Near you in Littledean
Typical jobs here are in homes near Church of St Ethelbert, Forest E-ACT Academy and Littledean Church of England Primary School, among other places. Well-known places in the area include Dilke Memorial Hospital (1.8 miles west) and Bledisloe Tump (3.5 miles south). Not far away are Foxes Bridge Bog and Ruardean Hill.
What a repair cannot fix
Some problems need a builder, plumber or fitter rather than us:
- A bath that’s rusted through
- Plumbing leaks, which need a plumber
- Acrylic that moves when you stand in it
If in doubt, send pictures and we’ll say what we think.
Materials we work on in Littledean
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Cast iron baths
How it works
We agree an arrival time beforehand, so you are not left guessing. Once we’re there, the work takes most of the day for most jobs. The room is left tidy and you’ll know when it can be used.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Plan for the room to be out of bounds to pets and children
- Tell us about any previous repairs or coatings
- Ensure the area is dry
Getting a price
You do not need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.
Related advice
Should I try a DIY kit first?
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
Littledean: your questions answered
Will there be a smell?
Expect a mild smell while we are working, which fades afterwards.
Can pets and children be at home?
We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.
Are there extra charges for Littledean?
We don’t add a call-out fee. The fixed quote covers the visit and the work.
Can you repair something that is been repaired before?
Most of the time. Tell us what was done before.
What happens after I send photos?
We review the pictures and send a fixed quote.
Is the work guaranteed?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Can a failed resurfacing be redone?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Can you re-enamel a roll-top bath?
Yes. Inside and out if you’d like.
Prices and what affects them
Resurfacing from £350. We give every job a fixed quote from pictures. These are the things that affect it:
- The material
- Previous DIY repairs that have to come out
- Doing more than one item at once
- How hard the colour is to match
We do not add extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Getting a price from photos
A couple of clear pictures is all it takes. It helps if you send:
- A clear, close picture of the problem area
- Good light, ideally daylight, without flash glare
- Your postcode, so we can check dates
- A coin beside the damage so we can judge size
Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and you will get a fixed quote back. There is no charge for the quote and no obligation.
Aftercare tips
After the repair has cured, a few habits help it last:
- Get any chip repaired quickly
- Rinse off hair dye, oils and bath bombs immediately
- Do not leave bottles, razors or sponges standing on the surface
- Respect the curing time we give you
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
Rust spots on a worn bath get worse with time. Resurfacing before they spread keeps it simpler.
About our accreditations · Every repair comes with a one-year guarantee.
