Surrey · England

Bath Re-enamelling in Grayshott

Local bath re-enamelling for Grayshott: photo quotes, tidy work and a year’s guarantee.

  • Resurfacing from £350
  • A dull, rough surface that won’t come clean
  • Worn patches where water runs and sits
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling near Grayshott

Prices and what affects them

Prices start from £350. There is no charge for travel to Grayshott. The price depends on:

  • Whether we combine several jobs
  • How much damage there is
  • Where the damage is and how we get to it
  • Previous DIY repairs that have to come out

No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.

How to get a fixed quote

It only takes a minute to photograph the damage, and it saves a visit. Please include:

  • A close-up of the damage, in focus
  • Any earlier repairs or coatings
  • Any details about the material
  • One picture of the whole bath

We price from photos so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.

Bath re-enamelling in Grayshott without replacing anything

Most baths are re-enamelled in a day, with the bath ready to use the following day. Nothing is disconnected or removed. We work on pressed steel baths, Victorian roll-tops and cast iron baths, and people most frequently call us about worn patches where water runs and sits and lots of chips and rust spots.

The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.

Area
Grayshott (GU26)
County
Surrey
Warranty
12 months on all our work
Quotes
From £350. Fixed and free, based on photos
Call
0345 017 0787
Updated
23 October 2026
Surface Doctor technician refinishing the outside of a roll-top bath

Work for landlords and builders

Builders use us to fix snagging damage before handover. We can visit several plots in one trip to keep costs down.

We are used to working with agents and managing companies. Send the address, photos and access details.

What a repair can’t fix

We will always be straight with you, so here’s what a repair cannot fix:

  • A metal bath with a through crack
  • An acrylic bath that flexes badly underfoot
  • Steel that has corroded right through

Send us pictures and we will tell you honestly.

What we work on

  • Basins & shower trays
  • Victorian roll-tops
  • Cast iron baths
  • Pressed steel baths
  • Acrylic baths

When to call us in Grayshott

Hard water speeds up the wear, and abrasive cleaners do the most damage.

Signs it’s time to call us include:

  • Wear marks under the taps
  • A bath in a colour that no longer suits
  • Enamel that’s lost its shine and feels rough
  • Lots of chips and rust spots

Questions to ask before you book

  • What the guarantee covers, and for how long
  • What prep work is covered
  • How your room will be protected
  • What aftercare is recommended

Our hiring checklist

What happens on the day

The work is clean and fairly quiet. Protection goes down first, then the job itself takes the best part of a day. Before we leave, we explain how soon it can be used and how to care for it.

  1. We mask and protect the room and ventilate it.
  2. The bath is cleaned, degreased and any chips or rust repaired.
  3. The surface is prepared and a bonding primer applied.
  4. Several coats of new finish are sprayed on.
  5. The bath is left to cure and can usually be used the day after.

Before we arrive

  • Let us know if it has been repaired before
  • Keep pets and children out of the room while we work
  • Ensure the area is dry

Getting a price

Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and we will reply with a fixed price. There is no charge for the quote and no obligation.

Send pictures for a quote

Advice

Where we work around Grayshott

Grayshott is about 7 miles south of Farnham, in Surrey. Wherever you are in the GU26 postcode area, we carry out the work at your property. Our repair technicians cover all 395 towns and villages in Surrey, from the larger towns to small villages. We work right across the region, from Grayshott to London (39 miles away).

We cover every part of the GU26 postcode area and the streets around it. Jobs here include addresses on Church Lane, Vale Wood Lane and Avenue Road. If you are just outside Grayshott, we cover Hindhead (1 mile east), Nutcombe (1 mile south-east), Beacon Hill (1 mile north), Whitmoor Vale (1 mile north-west) and Green Cross (2 miles north). We also work in nearby towns such as Guildford (12 miles north-east), Camberley (15 miles north), Farnham (7 miles north), Frimley (14 miles north), Cranleigh (12 miles east) and Ash (9 miles north).

What’s near Grayshott

We visit homes around St Edmund's School, Church of St Luke and Grayshott Church of England Controlled Primary School. You will also find Woolmer Hill School (1.3 miles south) and The Fox & Pelican pub (less than half a mile south-east). The closest station to Grayshott is Haslemere station, roughly 2.2 miles south-east. A little further out are Haslemere and District Hospital (2.4 miles south-east). The countryside around Grayshott includes Lynchmere Commons and Gibbet Hill.

Map of Grayshott © OpenStreetMap contributors

Why repair rather than replace?

Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing usually wins. Our bath re-enamelling starts from £350. The price reflects the work involved, not your postcode. You’ll see the full price before you book.

Why choose Surface Doctor in Grayshott

  • No need to remove anything
  • Work done at your home or business
  • Straight answers about what a repair can do
  • Rooms protected and left tidy

See our full price list or resurfacing vs replacement cost guide.

Different materials, different repairs

Acrylic

Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.

Roll-top and period baths

Freestanding roll-tops can be done inside and out, with the outside refinished as well.

Grayshott questions

It’s been repaired before. Can you still fix it?

In most cases. The old repair comes out first.

Is a repair better than a new one?

Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.

Will there be a smell?

There may be a mild smell during the work that clears as it cures.

How long will the bath be out of use?

Most baths are done in a day and can be used the day after. We give you timings with the quote.

Will the bath be moved?

No. It’s re-enamelled where it stands, so nothing else is disturbed.

Can you do the outside of a roll-top?

Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.

Will the price change on the day?

We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.

Do you charge for travel?

We do not add a call-out fee. Your fixed quote includes everything.

Can I fix it myself?

Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.