Surrey · England
Bath re-enamelling & resurfacing in Beacon Hill, Surrey
Damaged bath in Beacon Hill? We put it right where it is, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- Wear marks under the taps
- An old resurfacing that’s failing
Landlords, agents and businesses in Beacon Hill
Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
We are used to working with agents and managing companies. Just send pictures, the address and how to get access and we’ll arrange it.
Bath re-enamelling in Beacon Hill, done in place
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. If you are dealing with staining under the taps and around the waste and lots of chips and rust spots, we can help, whatever the material.
You are covered after we leave: each job carries a one-year guarantee, and we explain what it covers before booking.
- Area
- Beacon Hill (GU26)
- Area hub
- Surrey
- Warranty
- One year on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Common problems we fix in Beacon Hill
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
These are the problems we’re asked about most:
- Brown or grey marks that don’t clean off
- An old resurfacing that is failing
- Several chips and rust patches
- Worn patches where water runs and sits
Before you book anyone
- How to care for the finish
- How your room will be protected
- How long it needs to cure
- Whether the colour is mixed to match
Why repair rather than replace?
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Our bath re-enamelling starts from £350. The price depends on the type and amount of damage, the material and how many items we do on one visit. You get a fixed price from your photos, so there are no surprises on the day.
Why Beacon Hill customers choose us
- A year’s guarantee on all work
- Colour mixed on the day to match
- Dust sheets down, tidy finish
- No need to remove anything
Read our full price list and guide to resurfacing and replacement costs.
Towns and villages near Beacon Hill
What else we do in Beacon Hill
Questions from Beacon Hill
Does re-enamelling smell?
There is some smell while the coating is applied, so we ventilate the room. It clears as the finish cures.
Can you repair something that’s been repaired before?
In most cases. The old repair comes out first, so mention it when you send photos.
Do you work in Beacon Hill?
Yes, we do. We send a technician to Beacon Hill for every job, and the price is the same as everywhere else.
Do you work for landlords and businesses?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Can I get a quote without a visit?
Yes, almost always. Clear photos let us give you a fixed price without visiting.
What happens once I’ve sent pictures?
We come back with a fixed price, plus dates. You are under no obligation.
Can I add another job to the visit?
Of course, and it normally saves money. Just add the extra items to your photos and you will get one combined price.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Where we work around Beacon Hill
Beacon Hill is about 6 miles south of Farnham, in Surrey. From the centre of Beacon Hill to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. We cover 395 places in Surrey. You can also see our page for London, about 38 miles away.
Our visits in GU26 work the same way as everywhere else we cover. Whether you live on Hill Road, Glen Close and Harlequin Close or anywhere nearby, a technician can come to you. If you’re just outside Beacon Hill, we cover Whitmoor Vale (1 mile west), Green Cross (1 mile north-west), Grayshott (1 mile south), Hindhead (1 mile south-east) and Barford (1 mile west). Within a short drive, we also cover Guildford (11 miles north-east), Woking (15 miles north-east), Camberley (15 miles north), Farnham (6 miles north), Frimley (13 miles north) and Haslemere (3 miles south-east).
Local landmarks in Beacon Hill
We visit homes around Beacon Hill Community Primary School, The Flashes and The Fox & Pelican pub, among other places. Other local landmarks include Church of St Alban (under half a mile east), St Edmund's School (1.1 miles south) and Woolmer Hill School (2.2 miles south). Beacon Hill’s nearest station is Haslemere station, roughly 2.9 miles south-east of the centre. Other landmarks nearby include Haslemere and District Hospital (3 miles south-east). Open spaces near Beacon Hill include Gibbet Hill and Upper Lake.
Can I fix it myself?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
The process
Once we’re through the door, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the work takes the best part of a day, depending on what we find, and we finish by cleaning up and talking you through the result.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the next day, the bath is ready.
How to prepare
- Move bottles, mats and clutter away from the area
- Tell us about any previous repairs or coatings
- Mention if the room is upstairs or in a flat
How to get a price
Upload photos of the damage and a wider shot of the entire item, with your GU26 postcode, and we’ll reply with a fixed quote.
Advice
How we price bath re-enamelling
Resurfacing from £350. A fixed quote means you know the cost before booking. We take into account:
- The material
- Where the damage is and how we get to it
- The type of damage
- Whether old repairs or coatings need taking off
Set against the cost of replacement, a repair is normally a fraction of the price, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.
Getting a price from photos
You can generally get a fixed price without us visiting. To help us price it:
- What it’s made of, if you know
- One picture of the entire bath
- The postcode, so we can plan the visit
- Details of any past repairs
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them over. You’ll get a fixed price, not an estimate.
What a repair cannot fix
A few problems are outside what a surface repair can do:
- Damage hidden under a previous coating, until it’s stripped back
- Acrylic that moves when you stand in it
- Leaking taps or wastes (a plumber’s job)
Send us pictures and we will tell you honestly before booking.
What we work on
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
- Cast iron baths
Different materials, different repairs
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
About our accreditations · Every repair comes with a one-year guarantee.
