Lincolnshire · England
Bath Re-enamelling for Great Hale homes
Bath re-enamelling in and around Great Hale: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- Brown or grey marks that do not clean off
- An original cast iron bath that needs restoring
When a repair is not the answer
A repair isn’t always the answer, and we’d rather say so up front. We cannot fix:
- Acrylic that moves when you stand in it
- A bath that is rusted through
- A metal bath with a through crack
Send us pictures and we will tell you honestly.
Materials we repair
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
Bath re-enamelling in Great Hale, done in place
Re-enamelling gives a worn bath a new glossy surface without a refit. It suits baths that are dull, stained, rough or chipped all over. If you are dealing with a coating lifting around the plughole and wear marks under the taps, we can help, whatever the material.
Every job is backed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.
- Area
- Great Hale (NG34)
- County
- Lincolnshire
- Guarantee
- A year, on every repair
- Quote
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
How it works
The work is clean and fairly quiet. Protection goes down first, then the job itself takes the best part of a day. At the end we talk you through how soon it can be used and how to look after it.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Tell us if there are stairs or a lift
- Keep children and pets away from the room on the day
- Ensure the area is dry
Get a quote
Email us a picture of the damage and a wider shot of the whole item, and tell us you’re in Great Hale, and we will come back with a fixed quote.
Read more
Nearby places to Great Hale
Other services in Great Hale
Repairing versus replacing in Great Hale
When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Tiles, panels and taps stay put. Prices start from £350. The price depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. You get a fixed price from your pictures, so there are no surprises on the day.
What you get with us
- One-year guarantee on every repair
- Colour mixed on the day to match
- Work done at your home or business
- A fixed quote before you book
Take a look at our prices page or bath cost comparison.
Questions from Great Hale
Do you work in Great Hale?
Yes, we do. We send a technician to Great Hale for every job, and the price is the same as everywhere else.
How quickly can you book me in?
We’ll give you dates with your quote. Tell us if you need it done quickly.
What information do you need?
Send pictures through the quote form or call 0345 017 0787, and we will do the rest.
Do the materials smell?
There may be a mild smell during the work, which fades afterwards.
How do I get a price for bath re-enamelling in Great Hale?
Resurfacing from £350. Every job gets a fixed price from your pictures. Send a close-up and a picture of the whole item and your postcode.
Is there a call-out fee?
We do not add a call-out fee. The fixed quote covers the visit and the work.
Is there a smell?
Some odour is normal while we spray, so we ventilate the room. It clears as the finish cures.
What areas do you cover?
All of Lincolnshire, and the rest of the UK. There’s no extra charge for travel.
Work for landlords and builders
For anyone letting property in or around Great Hale, we can repair and quote for several addresses together. Just send photos for each address and we’ll price them together.
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Can I fix it myself?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
Prices and what affects them
Prices start from £350. Prices are worked out job by job, from your photos. What matters most is:
- How much damage there is
- Unusual colours or finishes
- Whether it’s a chip, crack, burn or wear
- Previous DIY repairs that have to come out
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Getting a price from photos
Two or three clear pictures are normally enough. It helps if you send:
- One sharp close-up of the damage
- A coin or ruler next to the damage for scale
- A wider photo showing the entire bath
- Whether it’s been repaired or coated before
To get a price, send a couple of pictures through our quote form or call us. We will tell you honestly whether it can be repaired.
How to care for the repair
Aftercare is simple, and it makes a real difference:
- Leave the bath for the full curing time before using it
- Keep suction mats out of the bath
- Do not let dyes or oils sit on the finish
- Stick to gentle, non-abrasive cleaners
A quick rinse and wipe after use helps, particularly where water is hard, to stop limescale building up.
Don’t try to scrub a worn bath back to shine. It just wears the enamel further.
Repairs by material
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Great Hale and nearby
Great Hale is about 5 miles east of Sleaford, in Lincolnshire. Book a date that suits you, and you will know when to expect us, so there is no waiting around. Our technicians cover 732 places in Lincolnshire, from the larger towns to small villages. You can also see our page for Birmingham, about 75 miles away.
We cover every part of the NG34 postcode area. Jobs here include addresses on High Street, Church Street and Church Walk and the roads around them. Nearby, we also work in Little Hale (1 mile south), Heckington (1 mile north-west), Helpringham (2 miles south-west), Burton Pedwardine (2 miles west) and Ewerby (3 miles north-west). We also work in nearby towns such as Boston (11 miles east), Grantham (15 miles west), Spalding (14 miles south-east), Sleaford (5 miles west), Bourne (15 miles south) and Austerby (15 miles south).
Landmarks near Great Hale
We visit homes around Nag's Head Public House, Church of St John the Baptist and Heckington St Andrew's Church of England School and the streets around them. Great Hale has its own railway station: Heckington station. Other landmarks nearby include Burton Pedwardine (2 miles west).
About our accreditations · Every repair comes with a one-year guarantee.
