Lincolnshire · England
Bath re-enamelling & resurfacing in Ewerby, Lincolnshire
Full bath re-enamelling and resurfacing for homes and businesses in Ewerby and across Lincolnshire. Free, fixed quotes from your pictures.
- Resurfacing from £350
- Stains that won’t shift
- An old resurfacing that is failing
Bath re-enamelling at your home in Ewerby
Most baths are re-enamelled in a day, and you can use the bath the next day. Taps, tiles, panels and plumbing all stay in place. We are often asked to fix stains that won’t shift and chips and rust in more than one place, on Victorian roll-tops, cast iron baths and acrylic baths.
The work is covered for a year after we finish. Just call us if there is a problem and we will come back.
- Location
- Ewerby (NG34)
- County
- Lincolnshire
- Guarantee
- 12 months on all our work
- Price
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
What we cannot put right
A repair isn’t right for every job, including:
- Steel that has corroded right through
- Acrylic that moves when you stand in it
- Damage hidden under a previous coating, until it’s stripped back
If in doubt, send photos and we will say what we think before you book.
Materials we repair
- Cast iron baths
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
What happens on the day
On the day itself, there’s little for you to do. Let us in and show us the room, and we’ll take it from there. Most visits take the best part of a day, tidy-up included.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- Once cured, normally by the day after, the bath is ready.
Preparing for the visit
- Let us know about parking or access
- Mention if the room is upstairs or in a flat
- Let us know if it has been repaired before
How to get a price
Email us a photo of the damage and a wider shot of the entire item, with your NG34 postcode, and we will reply with a fixed quote.
Advice
What bath re-enamelling costs
Prices start from £350. Quotes are free and the price is fixed. What we take into account:
- How many areas need work
- Whether it’s a chip, crack, burn or wear
- How hard the colour is to match
- Where the damage is and how we get to it
No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Send pictures for a quote
Phone pictures are fine, there is no need for anything special. Make sure they show:
- A coin or ruler next to the damage for scale
- What it’s made of, if you know
- Daylight if possible, and no flash reflection
- Where you are, by postcode
Pricing is simple: snap the damage close up and then the entire item, send them over with your postcode, and you’ll get a fixed price back. Quotes are free and no obligation.
Landlord and trade work in Ewerby
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which matters when someone is living in the home.
Also near Ewerby
What else we do in Ewerby
What your bath is made of matters
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot.
Why repair rather than replace?
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Our bath re-enamelling starts from £350. The price reflects the work involved, not your postcode. The full price is agreed before you book, with nothing added on the day.
Why choose Surface Doctor in Ewerby
- Work done at your home or business
- Most jobs done in one visit
- Everything repaired in place
- A year’s guarantee on all work
See our prices page and guide to resurfacing and replacement costs.
How to care for the repair
To keep it looking its best for years:
- Stick to gentle, non-abrasive cleaners
- Store bottles off the bath
- Never use suction bath mats
- Wash away dyes and oils after use
A quick rinse and wipe after use helps, particularly where water is hard, so limescale can’t build up.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Your questions about bath re-enamelling in Ewerby
Can you price it without visiting?
Normally, yes. A close-up and a wider photo are enough to give a fixed price.
When can you do it?
Your quote comes with available dates. Tell us if you need it done quickly.
Can a failed resurfacing be redone?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners.
Does the bath have to be removed?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
Can you change the colour of my bath?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
Is it OK to have pets in the house?
Just keep them out of the work area. We’ll let you know when it’s safe to use again.
DIY repairs versus a professional job
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
Our work in Ewerby
Ewerby is about 4 miles east of Sleaford, in Lincolnshire. We agree a date that works for you, and you’ll know when to expect us, so you are not left waiting in all day. We cover all 732 towns and villages across Lincolnshire, from the larger towns to small villages. Our nearest city page is Leeds, about 74 miles away.
Jobs in NG34 work the same way as everywhere else we cover. We regularly work on streets such as Main Street and Field Lane and the roads around them. Nearby, we also work in Evedon (2 miles west), Anwick (2 miles north), Ruskington (3 miles north-west), Dorrington (4 miles north-west) and Digby (5 miles north-west). Further out, we also cover Boston (13 miles east), Grantham (15 miles south-west), Sleaford (4 miles west), Woodhall Spa (10 miles north-east), Waddington (14 miles north-west) and Spittlegate (15 miles south-west).
Local landmarks in Ewerby
Our customers here include homes close to Church of St Andrew and the streets around them. The nearest railway station is Ruskington station, roughly 2.8 miles north-west of the centre. Other landmarks nearby include Rauceby Hospital (5.5 miles south-west) and North Ings Farm Museum (3.4 miles north-west).
About our accreditations · Every repair comes with a one-year guarantee.
