Essex · England
Bath Re-enamelling in Great Holland
Bath re-enamelling for Great Holland, without a refit. Send us pictures for a fixed quote, then book a visit.
- Resurfacing from £350
- Several chips and rust patches
- A peeling or bubbling previous coating
Great Holland questions
How do I get a price for bath re-enamelling in Great Holland?
Prices start from £350. The exact price depends on the damage, so we quote from pictures. You will get a fixed figure before you book.
What happens next?
We come back with a fixed price, typically with dates to choose from. There is no obligation to book.
Will there be a smell?
A little, depending on the job. Open windows and an extractor fan help.
Do you come to Great Holland?
Yes. We cover the entire UK and travel to Great Holland. Send pictures and we’ll quote, or call 0345 017 0787.
How long is the bath unusable?
Typically a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
Can you do more than one item on the same visit?
Yes, and it’s often cheaper. Just add the extra items to your photos and we’ll quote them together.
Can a failed resurfacing be redone?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Is the work guaranteed?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Bath re-enamelling in Great Holland, done in place
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. Common call-outs are for a coating lifting around the plughole and wear marks under the taps, on basins & shower trays, cast iron baths and acrylic baths.
Whatever the size of the job, you get the same one-year guarantee in Great Holland and across Essex.
- Area
- Great Holland (CO13)
- Area hub
- Essex
- Guarantee
- One year on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Should I try a DIY kit first?
If you are set on a kit, follow its instructions closely, and don’t use it until it has fully cured. If it fails, we can still put it right.
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.
Also near Great Holland
What else we do in Great Holland
What we cannot put right
A few problems are outside what a surface repair can do:
- A metal bath with a through crack
- Holes rusted through the metal
- Leaks from fittings rather than the bath
Not sure? Send pictures and we will give you a straight answer before you book.
Materials we work on in Great Holland
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
Repair or replace in Great Holland?
A new bath means a plumber, lifting out the old bath, making good the walls and tiles and days without a bathroom. Resurfacing gives the bath a new finish with the bath left where it is. Prices start from £350. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.
Why choose Surface Doctor in Great Holland
- Dust sheets down, tidy finish
- No extra charge for your area
- Work done at your home or business
- CHAS and Constructionline accredited
Take a look at our full price list and guide to resurfacing and replacement costs.
Aftercare tips
So the finish stays in good condition for years:
- Wash away dyes and oils after use
- Keep toiletries on a shelf rather than in the bath
- Do not leave a chip unrepaired
- Use washing-up liquid and a soft cloth
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.
Our work in Great Holland
Great Holland is about 3 miles north-east of Clacton-on-Sea, in Essex. Our repair technicians come to clients in Great Holland and the surrounding area, so nothing has to leave your home. Great Holland is one of 644 places in Essex where we work. You can also see our page for London, about 61 miles away.
Here we cover the CO13 postcode area. You’ll find streets such as Rosery Mews, Orchard Drive and Laxton Grove, all of which we cover. We also cover the places around Great Holland: Kirby Cross (1 mile north-east), Kirby-le-Soken (1 mile north-east), Thorpe Cross (2 miles north-west), Lane End (2 miles north) and Frinton-on-Sea (2 miles east). Within a short drive, we also cover Colchester (14 miles west), Clacton-on-Sea (3 miles south-west), Harwich (7 miles north), Camulodunum (15 miles west), Greenstead (12 miles west) and Wivenhoe (11 miles west).
Around Great Holland
Typical jobs here are in homes near The Ship Inn, Kirby Primary Academy and Tendring Technology College. Nearby too are Greensward (1.7 miles east) and Church of All Saints (0.5 miles south-east). The closest station to Great Holland is Kirby Cross station, roughly 0.6 miles north. For a walk, there’s Great Holland Pits.
Prices and what affects them
Prices start from £350. Prices are worked out job by job, from your pictures. The main factors are:
- Previous DIY repairs that have to come out
- Doing more than one item at once
- What the surface is made of
- How easy the damage is to reach
The price reflects the work involved, not your postcode. You’ll see the full price before you book.
Getting a price from photos
Almost every job we do is priced from pictures. This is what to send:
- Where you are, by postcode
- Something in shot to show the size
- Any details about the material
- Whether it’s been repaired or coated before
If you’re in Great Holland and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
For landlords and businesses
If you manage property in Great Holland, we can repair and quote for several addresses together. Send pictures for each one and we will come back with a combined price.
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
What we are called out for in Great Holland
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
The most common problems we are called about are:
- Chips and rust in more than one place
- An outdated colour you’d like to change
- An old resurfacing that is failing
- Wear marks under the taps
What your quote should include
- How soon you can use it again
- Aftercare advice
- What prep work is covered
- What protection goes down before work starts
The process
Visits start with a quick look at the job together, so there are no surprises. After that, protection goes down around the work area and the work begins. You can expect it to take a full day.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the next day, the bath is ready.
Preparing for the visit
- Tell us about parking, stairs or access
- Keep a parking space free if you can
- Let us know which floor the room is on
Getting a price
Upload pictures of the damage and a wider shot of the entire item, with your CO13 postcode, and we’ll reply with a fixed quote.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
